I've recently reinstalled my mac (OS 10.8.5) and upgraded to Lightroom 5.2.
Since then, I cannot import nor play video (avi or mov).
When importing, I got an error related to a connexion to the Dynamic Link Server When playing videoa previously imported with Lightroom4, I got a grey screen and it doesn't start.
In LR4 when I burn my slideshow video to a USB and play on my TV, the slideshow works fine but the mp3 music skips during transitions. Played on the PC music is fine. I am using 'fit to music'
View 13 Replies View RelatedI made a dvd video on elements 7 (wmv) but it will not play on a dvd player. If I upgrade to elements 11 will it allow me to burn a dvd that will be a different format to be played on a dvd player?
View 2 Replies View RelatedLR 4.6 shows wrong Date (1988-02-07) and time after importing. Explorer shows the exact date and time of craeting the file. File type is MOV, camera Leica M (240).
View 1 Replies View RelatedVideo files from an iPhone 4S (5.1.1) are transferred onto my Mac (this story is true under 10.7.4 and under 10.8) via PhotoSync. In Finder, the files reflect the correct creation date. On importing the files to Aperture, the correct capture time and date is shown in the metadata. On importing the files to Lightroom 4.1, however, the capture time shows as plus-five hours from when actually shot. I can't think of any setting I might have tripped in Lr to cause this to happen on import (I understand how to manually change the capture time).
View 17 Replies View RelatedI just purchased Corel VideoStudio Pro X4 and I am having a problem. The video camera I use is a GoPro Hero that records in MPEG-4 and I have been using the 16:9, 1080 P, 30 frames per second mode. When I import a video to VideoStudio and try to play the clip, it is obscured by constant blotchy, snowy, large random pixelation for lack of a better word. In any case, you can hardly see the video. If I import a standard definition video taken with the same camera everything seems to be OK. The video displays perfectly on my computer if I just play it.
View 1 Replies View RelatedI have started a new video project with a resolution of 1920 x 1080 in Photoshop CS6with a pixel aspect ratio set to square.. In the project I add a video to the timeline. The source video was created in QuickTime and exported at a 1920 x 1080 resolution MOV file. I have check both the source clip at the canvas siye and have confirmed that both are 1920 x 1080. However, when I import the video it takes up less than the entire frame. It appears that the video is being scaled down so that there is some white space to the right and below the video clip. See the image below.
In the past I have been able to import 1920x1080 video to a 1920x1080 project without a problem. I have 4 or 5 examples that have worked well.
Trying to finish up first video project shot with 5D MK11 in 1080p.
I had to convert all clips to smart objects it seems to adjust highlights.
I had rendered the project once to 1080P but forgot part of one clip and dragged it into PS.
It is the exact same size but is not positioned correctly and I lose part of the right edge.
I thought it would fix itself with rendering it to 1080P as the image and canvas size are identical and from the same shoot--but it didn't.I hit "fit in screen" or actual pixels but not sure that matters.
[URL]
I'm trying to upload an AVI file to make a GIF, but whenever I go to File-Import-Video Frames to Layers all of my layers are blank. When I tried to play the click in QuickTime it told me to download an extension or something. I downloaded Xvid, but still it's not working.
View 4 Replies View RelatedMy imported video is 1280x720. When I play the video in Adobe, the left and right parts of the video are not viewable in the monitor as it plays.
How can I change the resolution of the monitor so I can view the whole video?
if I export a sequence from the timeline and have it imported into the project it only imports the film but without any sound. With some codec I can play the clip as it should be in the windows 7 ultimate explorer but I sometimes also get automatically a HD-file and the sound files as way as a separate thing. I never had that before. In fact what I want to do is to create a sequence from my timeline and have that as a separate HD-file to use whereever in the project. Especially if the sound is not the original one but added by myself. I have done that before and I would just get my HD-file and could play it in the preview WITH sound. Now all I get is the picture but .... like I said: without sound. That is not normal. So is that a rather useless update or a failure in the program?
And how can I copy a sequence from a timeline and place it anywhere else on the timeline. Used to be so easy in a previous premiere version. Now copy and paste does not work at all anymore. And whenever I want to add a clip onto a layer, I have to shut all used layers, because otherwise the sound goes anywhere but where it should and might just place itself within another sound-layer.Used to be all much better and simpler in previous editions.
I just bought VideoStudio Pro x6 from Amazon last night and got to tinkering around with it. I have a MP4 video that I imported in and half way through previewing it, the audio drops. The original plays all the audio fine, but VideoStudio just can't get past a certain point with the audio.
I copied this from my system info. Not sure what's needed:
I am on Windows 7 Ultimate 64 bit (6.1 Build 7601)
Processor i7 CPU 920 @ 2.67GHz
Memory: 6144MB RAM
DirextX 11
I imported an AAF from Premiere Pro and the media came in separately from the video. So I have a video clip and a separate audio clip instead of the two together. Is this because I chose "Save Sources Separately"?
View 6 Replies View RelatedAudio sync problem I'm experiencing with videos recorded with the latest iPad 3 (well, that's what I'm calling it anyway).
I believe the iPad 3 recording format is 1080/30p with 44.1Khz / 16 bit audio, but when I match those settings on a Premiere Pro CS5.5 project (or try 48KHz audio as a test), the audio gradually goes out of sync. If the video is several minutes long, it becomes quite obvious, and by 10 minutes, it's terrible!
I should add the file plays back fine on the iPad itself and was imported to a Mac via iTunes. It also plays fine on the Mac itself in Quicktime.
On a related note, I additionally captured the audio using a Zoom H2n which i intended to replace in Premiere, but foolishly I captured it at 48KHz, rather than the 44.1KHz of the iPad video file. Should I resample it?
I actually managed to line-up the 48 and 44.1KHz waveforms from the iPad and Zoom in Premiere quite accurately, but again both gradually go out of sync with the video...
I'm running Premiere Pro 5.5.2 on Mac OSX 10.7.3.
The files are Mpeg4..I just upgraded some PSE 11 catalogs to PSE 12 and all functions and tags imported fine. When I import video only into PSE12 organizer, it will not generate a thumbnail image. I imported the same files into the old catalog using PSE11 and the thumbnails will be created. I have even gone a step further and converted the PSE11 catalog after imports were made, and PSE12 will now have the thumbnails. Eventually PSE11 is going to have to be uninstalled.
View 6 Replies View RelatedI have produced a MP4 video using Magic VideoDeluxe. I can read it properly with VLC.
I can import it in a visual studio pro x5 project. The problem is that when I play it in Video Studio environment, some sequences are replayed twice and it happens that I see video artifacts.
Is it due to the codec? I have downloaded (and bought) VideoStudio last week, so I think it is not necessary to download the patch provided on the website.
i have file in tiff format on a seperate hard drive can i play them on my tv without a computer if so how ..also if i have the same type files on a memory stick can i ply these on my tv without a computre .. is there a device to play both.
View 1 Replies View RelatedToolclips videos..when i hoveover a toolclip and stays for some time the starts automatically.
1. Which player is playing this videos
2. Why the Videos are not played on some of the computers.
I have video studio 7 SE DVD. When I capture edit and share my file and burn it to DVD, the picture looks fat and stretched whenplayed on a widescreen TV.
I have played around with some of the properties and setting on the program but everything I do has the same effect.
I can have the TV set to 4.3 and the picture is fine but of course I have the black bars on each side.
Is there a way to have it show correctly on the widescreen TV without affecting the quality?
I dont mind if it cut some of the picture out as in top and bottom, I just want to keep the picture the right ratio without stretching it to fit.
My video camera I am using is a DV cam. I think it might be half the problem as it records in 4.3 format and is playing on a 16.9 TV.
I've tried everything I can think of to get the audio to playback after capturing from a VHS tape, but can't figure it out. I can hear the audio output from my sound card during capture, but playback has no audio. I noticed in the Video Properties box of the Options menu in Capture that the "audio source" says "pass through to sound card", but the "audio source" box is grayed out and can't be changed. I am using an S-Video cable for the video from the VCR, and L/R audio to a stereo plug into my Line In on the motherboard. I can hear the audio during capture, but not playback. BTW, the only means I have at this point is to use Pinnacle Studio to capture, then export as an mpg. file to import into VideoStudio. Pinnacle gives me a choice in audio inputs. Why is VSX4 not allowing that?
View 8 Replies View RelatedWhen I use photos, they pixelate slightly and loose quite a bit of clarity as soon as I press play. Why is this?
View 2 Replies View RelatedPreviously i`m using version 2009 and importing Google earth image and surface works fine. However, recently i tried with version 2010 and i`m having some problem here (imported surface / contour seems ok but the image is too large like 3x or 4x). How to solve that?
View 3 Replies View RelatedI have a dwg that someone imported and I cannot find where this object is. I have tried searching the database with DBLink, Ideate BIMLink and I have gone into every view to no avail. I also used the reviTTools add-in which says there are no drawings in the file. Am I dealing with a corrupted file? I am super OCD and this is in our Template which makes it an even bigger problem.
View 2 Replies View RelatedThis entire upgrade sucks! Took me forever to figure out how to get my catalog from 3.0 imported. Now I am missing plug ins, user presets in develop module, paper pre-sets in printer module. Why isn't everything imported? Why aren't all default settings imported? Why do I need to set up the layout etc. again. Horrible upgrade! I was on line with Adobe tech support. They say they know the problem, try back in a few days! I spent $79 to upgrade andthe product doesn't work!
View 19 Replies View RelatedI have LR loaded on my MacBook Pro and everything was alright in terms of LR operation. I use a 5D MKII camera and always shoot in RAW (CR2). I always download images from the Card to the HDD and then import it to LR. However, CR2 Raw files are not getting imported and I am getting the following error message - "The files appear to be unsupported or damaged".
I can still import other files like .tiff and .jpg files.
I am using Lr 4.3 and want to import vacation photos. Lr says they have already been imported but I can't find them even if I search by photo name using Explorer. Should I just uncheck the box not to import suggested duplicates and import again? I have over 4,000 and don't want them on the hard drive twice.
View 3 Replies View RelatedAfter importing folders into LR, are there any issues with going into those folders and moving out .png, .gif, .pdf and other files that LR does not import?
View 1 Replies View RelatedAfter I updated to 3.6 I could no longer preview the pictures on the card or camera regardless of the format. Prior to 3.6 I had no problem.. I did not change ,y preferences but I checked them to be sure and can see nothing that deals with this.
View 3 Replies View RelatedHow to cycle through various (imported) presets/ effects in lightroom without adding them to the previous effect? In other words, I want to just keep trying various presets in developer mode but when I click on different effects, it should reset and apply current effect, instead of adding/ compounding over previous effect.
What I am doing now is Undoing the effect each time before trying next effect or preset.
I imported some pictures to who knows where?
So where is "show all in catalogue" so i can survey quickly?
Otherwise I'm going to have to go thru every single folder?
What I require is an A4 enlargement of my imported Photo.
View 1 Replies View Related