VideoStudio :: Bad Imported MP4 HD Video?
May 16, 2011
I just purchased Corel VideoStudio Pro X4 and I am having a problem. The video camera I use is a GoPro Hero that records in MPEG-4 and I have been using the 16:9, 1080 P, 30 frames per second mode. When I import a video to VideoStudio and try to play the clip, it is obscured by constant blotchy, snowy, large random pixelation for lack of a better word. In any case, you can hardly see the video. If I import a standard definition video taken with the same camera everything seems to be OK. The video displays perfectly on my computer if I just play it.
View 1 Replies
ADVERTISEMENT
Apr 19, 2013
I just bought VideoStudio Pro x6 from Amazon last night and got to tinkering around with it. I have a MP4 video that I imported in and half way through previewing it, the audio drops. The original plays all the audio fine, but VideoStudio just can't get past a certain point with the audio.
I copied this from my system info. Not sure what's needed:
I am on Windows 7 Ultimate 64 bit (6.1 Build 7601)
Processor i7 CPU 920 @ 2.67GHz
Memory: 6144MB RAM
DirextX 11
View 4 Replies
View Related
Oct 20, 2013
I've recently reinstalled my mac (OS 10.8.5) and upgraded to Lightroom 5.2.
Since then, I cannot import nor play video (avi or mov).
When importing, I got an error related to a connexion to the Dynamic Link Server When playing videoa previously imported with Lightroom4, I got a grey screen and it doesn't start.
View 1 Replies
View Related
Nov 20, 2012
I have started a new video project with a resolution of 1920 x 1080 in Photoshop CS6with a pixel aspect ratio set to square.. In the project I add a video to the timeline. The source video was created in QuickTime and exported at a 1920 x 1080 resolution MOV file. I have check both the source clip at the canvas siye and have confirmed that both are 1920 x 1080. However, when I import the video it takes up less than the entire frame. It appears that the video is being scaled down so that there is some white space to the right and below the video clip. See the image below.
In the past I have been able to import 1920x1080 video to a 1920x1080 project without a problem. I have 4 or 5 examples that have worked well.
View 5 Replies
View Related
Jun 9, 2013
Trying to finish up first video project shot with 5D MK11 in 1080p.
I had to convert all clips to smart objects it seems to adjust highlights.
I had rendered the project once to 1080P but forgot part of one clip and dragged it into PS.
It is the exact same size but is not positioned correctly and I lose part of the right edge.
I thought it would fix itself with rendering it to 1080P as the image and canvas size are identical and from the same shoot--but it didn't.I hit "fit in screen" or actual pixels but not sure that matters.
[URL]
View 1 Replies
View Related
May 2, 2012
I'm trying to upload an AVI file to make a GIF, but whenever I go to File-Import-Video Frames to Layers all of my layers are blank. When I tried to play the click in QuickTime it told me to download an extension or something. I downloaded Xvid, but still it's not working.
View 4 Replies
View Related
Mar 1, 2009
My imported video is 1280x720. When I play the video in Adobe, the left and right parts of the video are not viewable in the monitor as it plays.
How can I change the resolution of the monitor so I can view the whole video?
View 2 Replies
View Related
Feb 19, 2014
if I export a sequence from the timeline and have it imported into the project it only imports the film but without any sound. With some codec I can play the clip as it should be in the windows 7 ultimate explorer but I sometimes also get automatically a HD-file and the sound files as way as a separate thing. I never had that before. In fact what I want to do is to create a sequence from my timeline and have that as a separate HD-file to use whereever in the project. Especially if the sound is not the original one but added by myself. I have done that before and I would just get my HD-file and could play it in the preview WITH sound. Now all I get is the picture but .... like I said: without sound. That is not normal. So is that a rather useless update or a failure in the program?
And how can I copy a sequence from a timeline and place it anywhere else on the timeline. Used to be so easy in a previous premiere version. Now copy and paste does not work at all anymore. And whenever I want to add a clip onto a layer, I have to shut all used layers, because otherwise the sound goes anywhere but where it should and might just place itself within another sound-layer.Used to be all much better and simpler in previous editions.
View 3 Replies
View Related
Jun 21, 2012
I imported an AAF from Premiere Pro and the media came in separately from the video. So I have a video clip and a separate audio clip instead of the two together. Is this because I chose "Save Sources Separately"?
View 6 Replies
View Related
May 9, 2012
Audio sync problem I'm experiencing with videos recorded with the latest iPad 3 (well, that's what I'm calling it anyway).
I believe the iPad 3 recording format is 1080/30p with 44.1Khz / 16 bit audio, but when I match those settings on a Premiere Pro CS5.5 project (or try 48KHz audio as a test), the audio gradually goes out of sync. If the video is several minutes long, it becomes quite obvious, and by 10 minutes, it's terrible!
I should add the file plays back fine on the iPad itself and was imported to a Mac via iTunes. It also plays fine on the Mac itself in Quicktime.
On a related note, I additionally captured the audio using a Zoom H2n which i intended to replace in Premiere, but foolishly I captured it at 48KHz, rather than the 44.1KHz of the iPad video file. Should I resample it?
I actually managed to line-up the 48 and 44.1KHz waveforms from the iPad and Zoom in Premiere quite accurately, but again both gradually go out of sync with the video...
I'm running Premiere Pro 5.5.2 on Mac OSX 10.7.3.
View 15 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
May 20, 2013
LR 4.6 shows wrong Date (1988-02-07) and time after importing. Explorer shows the exact date and time of craeting the file. File type is MOV, camera Leica M (240).
View 1 Replies
View Related
Feb 24, 2011
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies
View Related
Oct 9, 2013
The files are Mpeg4..I just upgraded some PSE 11 catalogs to PSE 12 and all functions and tags imported fine. When I import video only into PSE12 organizer, it will not generate a thumbnail image. I imported the same files into the old catalog using PSE11 and the thumbnails will be created. I have even gone a step further and converted the PSE11 catalog after imports were made, and PSE12 will now have the thumbnails. Eventually PSE11 is going to have to be uninstalled.
View 6 Replies
View Related
Jul 1, 2012
Video files from an iPhone 4S (5.1.1) are transferred onto my Mac (this story is true under 10.7.4 and under 10.8) via PhotoSync. In Finder, the files reflect the correct creation date. On importing the files to Aperture, the correct capture time and date is shown in the metadata. On importing the files to Lightroom 4.1, however, the capture time shows as plus-five hours from when actually shot. I can't think of any setting I might have tripped in Lr to cause this to happen on import (I understand how to manually change the capture time).
View 17 Replies
View Related
Nov 18, 2010
I have a Canon DC210 SD digital camcorder, which records onto mini DVD's. The camcorder has no USB, IEEE 1394, connector on it. The only way to get video clips onto my PC is to put the mini DVD into the DVD drive of my PC. The video clips are stored in .VOB format, which is a shell for MPEG2 data. The camcorder records a timecode in the video file, but when I use the Capture/Import from Digital Media function that timecode does not get brought into VS X3. I have searched the forum, and see several articles about timecode imports from DV tape, but I didn't find anything about importing from digital media.
I have tried putting a check in the Add Video Date Information as Title checkbox, but I do not get the timecode in the imported file. Canon assures me the timecode is there ready to be imported along with the MPEG video data, but I can't get at it. I have tried importing directly from the mini DVD, and from the .VOB files saved on my hard drive, still no timecode in the imported clips.
View 7 Replies
View Related
Feb 27, 2012
I have Corel Video Studio Pro X3. When I import .MOV videos also in small resolution (also 320x240) into timeline and play clips sound plays fine but when I play the project there is audio with interruptions. Its impossible to edit!!! AVI, MPEG also in full hd plays sound good also in °play project° also in °play clip°....
View 1 Replies
View Related
Oct 27, 2010
When importing a HD project (not rendered footage) into another HD project in VSX2, the movement of objects in the rendered AVCHD is 'stuttered' - why ?This is NOT a transition or title stutter as per one of my previous posts - which was resolved by downloading the trial version of VSX3.
In VSX2 I have cut down my AVCHD source film into smaller, more manageable chapters - each a separate VSX2 project.When assembling these chapters, I chose the "import project" (ex chapter 2 into chapter 1) as I used to do with UMSP7.0 Once BD-RE is cooked, the first chapter looks fine but the subsequent chapters have very noticeable problems with movement - especially vehicles moving accross the screen - it looks like the frame rate has gone right down to 10fps (iso 25 for PAL).
Oddly enough (I would have thought it should be the opposite), if I render each chapter to AVCHD and then import the rendered chapters, image movement is much smoother (virtually same as original).The project properties are all the same in each project (PAL AVCHD 1920X1080 25fps); I have tried activating the 2-pass render and have tried switching on and off the anti-flicker but no improvement.
The "import project" feature that I used in UMSP7 is great because it allows you to create the chapters independently but then put some uninterrupted music over the links between chapters in the final project to ensure continuity if desired.
Win Vista, Pentium Core Duo 2.26GHz, 4Gb DDR2 300Gb HDD + 2 x 250Gb USB-connected HDDs, BD-burner, Sony HDR-CX550
View 4 Replies
View Related
May 23, 2011
Video Studio is constantly losing audio I import. I have to replace it in the time line almost every 5 minutes. Had this problem with X2 also. Updated all drivers still losing audio.
View 1 Replies
View Related
May 30, 2012
I am using Corel VS X5. I have created MPEG4 files using Adobe Captivate and imported them into Corel. When I preview them, if I select Clip, the video looks fine. But if I preview the Project, the video is blurred. I first thought it might be caused by Smart Proxy but after disabling that feature, the problem persisted. I tried publishing the project to see if the final version would be ok. Still no luck. I tried the online chat and they suggested updating my viewers. I did as instructed and restarted my PC. Still no luck. My imported MPEG4 file is 1024x767 HD.
View 5 Replies
View Related
Jun 6, 2011
VS11+,Firefox,XP Home.I have imported a WAV file from my hard drive ,it is 705bps and 99.7 kb, it plays in Windows Media Player but there is no sound when played in the music track.Initially I raised the vol to 200(it was to play with a file in the other sound track) as I could not hear it.It played once.Then, VS "encountered a prob and had to close" and the file has remained silent ever since.The wav file still plays in WMP.
View 14 Replies
View Related
Dec 27, 2011
X4. I created a 48hz sample rate 24 bit WAV file on my portable Tascam recorder.. I am creating a sales presentation for my invention. I have brought in many different videos I created on my camera and have edited them successfully with single clip and multi clip. Also have been able to split audio out of video. adjust sections using the nodes with the sound mixer.. move audio after split to different areas on the timeline.. However I need to do some voice over work. I figured it would be much easier and better quality for me to use my tascam to create the wav's and then just drop them into the project, edit them and place them where I want them, mute the voice I have on the video..
I was able to bring the .wavs in just fine.. and while editing them in clip mode they play just fine, I can shorten them or cut them where I need too. But when I choose to play back the project with the .wav in one one of the additional sound/music tracks I get very nasty static only. None of my recorded voice is audible. click to clip mode on the wav audio and it plays perfect. I tried moving it to the voice over track area and same exact problem.
am I missing a switch function somewhere? I made sure I muted the video clips above the .wav in the timeline. The manual says to use import option to bring in audio files but I do not see an import button anywhere? missing something? seems to me the drag and drop or add to library a wave file should work.. ??
View 2 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Mar 7, 2013
Previously i`m using version 2009 and importing Google earth image and surface works fine. However, recently i tried with version 2010 and i`m having some problem here (imported surface / contour seems ok but the image is too large like 3x or 4x). How to solve that?
View 3 Replies
View Related
Nov 3, 2011
I have a dwg that someone imported and I cannot find where this object is. I have tried searching the database with DBLink, Ideate BIMLink and I have gone into every view to no avail. I also used the reviTTools add-in which says there are no drawings in the file. Am I dealing with a corrupted file? I am super OCD and this is in our Template which makes it an even bigger problem.
View 2 Replies
View Related
May 30, 2011
Is there a way to set 20 fps for my video in corel video studio x3 ?
i made a 3d animation and rendered about 3000 single frames as .bmp . Now i want to put them together to a video. the speed of the animation is preset, so i need every frame to show up for 0.05 second..... 20 fps not 15, not 24, not 25 and not 29.97, but exactly 20 fps. i don't know if i am just very stupid, but i can not find the settings for this.
View 2 Replies
View Related
Jul 25, 2011
With the installation of SP1 (VSX4), the options to create a blu-ray video file (assuming 1920x1080 only, though the same options exist for 1440x1080) are now:
Blu-ray (1920 x 1080)
Blu-ray H.264 (1920 x 1080P)
Blu-ray H.264 (1920 x 1080)
Now, I want to create a 'standard' Blu-ray disc of family videos. My camera is a Canon Vixia HF20, recording in 1920x1080 in the '60i' mode. The camera creates AVCHD formatted files. I know I don't want the progressive option, however, what is the difference between the other two options (is it MEG4 vs. AVCHD? If so, what should I choose when creating a new disc?). I want my disc to support as many blu-ray players and HDTV's as possible since I will be giving copies to various family members (meaning I don't want a format that supports only the latest releases of blu-ray players).
View 9 Replies
View Related
Mar 28, 2013
Can it actually be done? If I so much as drop 3D file onto the timeline and tag it as 3D (SBS L-R in my case), I get the "... lost 3D attributes..." message when I try to create a 3D file. I tried tagging a 2D file as 3D for S&Gs and got the same result. In case it matters, the files are in .avi format (and even rendering a 2D version of these makes a jumpy video, but I digress...).
View 9 Replies
View Related
Mar 3, 2013
Is there anyway to convert the video to 4:3. When I save it 4:3 file it doesn't cut it down. It makes the video look back. Can I cut the outside edges to make the video 4:3?
View 3 Replies
View Related
Dec 18, 2010
I just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
View 3 Replies
View Related
Feb 19, 2013
When I record in 720p @ 30 FPS my raw files are usually around 30-35kbit rate, however whenever I compress the videos they seem to drop to around 18k bitrate which really put my videos below the standard I want. I've tried to add my own compression templates but whatever I do, I can't seem to get any of the compression options above 20.000 bitrate.
I have tested with Sony Vegas and with that I can pretty much choose myself what bitrate I want it to be. Although I know Corel a lot better and its easier for me to do what I want with it.
- How can I compress my files with higher bitrate? I want it around 30.000k.
View 1 Replies
View Related
