How do you force LR to start in 64 bit?
I have Windows 7 64-bit and also downloaded LR 64 bit. But I don't see "x64" in the LR title bar. http[url]....
Can you force LR to start in 64 bit mode?
Our company is using 2012Lt and has a couple (3) regular templates we use. The problem is I have to keep going back to the templates and clean them out (txt styles, layers, etc) and what I suspect is happening is that someone starts a new dwg does some work and the auto save kicks in before they "save as".
Question, is there a way to force someone to "Save As' immediately after they start a new dwg?
How can I force LR 4.1 to point to my CS6? Using Windows Vista on a laptop.
View 3 Replies View RelatedI use lightroom to order and do small edits to photos. Alot of the time I will batch a set of photos through a couple actions (photoshop) before I start with lightroom.My problem arises when I (more often than not my colleuge) will start working with the wrong source pictures (either scaled down size or not batched yet). So i've got a collection with all the wrong sized photos as source. So my question is if i replace the picture withe the proper resolution files which are named the same is there a way i can force lighroom to "relink" with the high res versions? I tried deleting the source files with the hope that lightroom would ask me to relink them but it didn't.
View 3 Replies View RelatedI have LR 3.6 and have noticed that since LR1, the WB picker does not usually set RGB percentages equally on the first click. It takes several tries of me clicking on the same group of 5x5 pixels of a neutral WhiBal card before the %R=%G=%B (within 0.5% or so).
Usually what happens is I get a close grouping on the first click (say 71.2%R, 72.8%G, 70.6%B). But if I click again on the same group of pixels without moving the mouse, I get another WB (say 71.6%R, 71.0%G, 72.5%B). I keep WB AutoDismiss unchecked,
The gray on the card noticeably changes hue (greenish gray, warmish gray, coolish gray) on each attempt.
Clicking again and again, I (might) finally get a close grouping like (71.3%R, 71.7%G, 70.9%B) in which I call it good. Or I may decide to make fine manual adjustments to the color temperature and tint sliders until I get a perfect match %R=%G=%B (within 0.5% or so).
Why doesn't the wb clicker automatically force %R=%G=%B ?
is there a method or setting to force LR4 to update the prewies in "bulk", means outside of the grid too?
problem is that when applying development changes on image sequences with hundreds of images, or even a smaller bunch of images LR4 only shows the applied changes in the current grid view.
for updating the previews one has to go back and forth in preview by hand. this seems a bit stone age and can take a while.
this was never a problem in bridge, which - although it took its time to create ALL previews - afterwards allowed for quick scrolling trough images with all previews generated. this was especially good for watching stop-motion movies and applying xmp RAW development changes.
for LR4 RC3, this would be a nice option to have... classic, like it is now, and a "force update previews outside grid view" with a true progress indicator / counter, like with bridge.
an example where we started using lightroom during production and ran exactly into the problem of slow / missing preview updates after applying batch XMP / development changes can be seen here (about 32000 raw files processed, 7500 used for the film)[url].....
I'm using Lightroom 4.0 and I'm having problems with the Flickr Publish Service. In the publishing manager, the incorrect login shows and the logout button is non functional. I need to authenicate to Flickr's API with the correct login. I've tried un-installing and re-installing, but to no avail. I have no idea where the plugin picked up the displayed login name from as it's not one that I've ever used. Is there a way that I can force a logout so that I can enter the proper information.
View 3 Replies View RelatedIs there any way to force Snapshots and Virtual Copies to read metadata from the original raw file after an update of the same?
I had to change the lens name on some Leica M9 files to correct an operator (me) error, and I did it by editing the exif data with an exif editor and then forcing LR4 to read the metadata from the file. This worked well for everithing but the snapshots and the virtual copies on which the metadata remain as originally registered, unchanged.
When I send a file to Ps from Lr, edit that file then save it, Lr puts that file at the end of the line instead of next to the file I was working on. When you have 600 photos in a down loud, it is a pain to scroll through the photo's to find your place again.
Is there a setting to force the saved file back in line next to the file that was edited in Ps?
I can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies View RelatedI got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
primere pro will not start... appliction unable to start correctly 0xc000007b
View 1 Replies View RelatedI want to start AutoCAD LT without the empty drawing. Just AutoCAD and the welcome screen. How can i do that? I always close the first drawing and begin a new one by choosing out of several templates or start with an existing drawing, rename and modify it. For NEW or OPEN i like to use the welcome screen.
View 3 Replies View RelatedAfter updating to OSX Mavericks, Lightroom 5 will no longer start on my MacBook Pro. Checking the system log, I see only this:
10/30/13 8:56:00.390 AM spindump[21481]: Adobe Photoshop Lightroom 5 [21388] didn't gather any samples due to audio running
10/30/13 8:56:00.406 AM com.apple.launchd.peruser.501[170]: (com.adobe.Lightroom5.30128[21388]) Exited: Terminated: 15
why Lightroom 5 will no longer start?
I've downloaded Lightroom for a trial because I need better tools for my pictures. The interface for lightroom is very different and finding it a little difficult to move around and do things.
I've created a print job - a collage that I saved to a jpeg file - but every time I go to print it is still there. How do I get rid of it?
i've been running LR5 for 2 months and updated to 5.3 4 weeks ago.Fine till this week when it hung on start and clicking anywhere including the help menu just causes the blue working circle to turn endlessly.i've uninstalled and reinstalled but the same result. I've also tried uninstalling 5.3.
View 1 Replies View RelatedI downloaded LR 5.3 and LR 5.3 starts now every time and ask the registration questions. I always have to fill the dialog. What could I do? LR 5.2 worked fine.
View 1 Replies View RelatedI operate Windows 7 with Lightroom 3. My catalogue is held on an external drive from my PC. I have tried to open my catalogue today, but my images (17,000 plus) have disappeared, although my folders are still present. I have the RAW images backed up on a separate drive and the catalogue backed up in two parts by exporting these two sections as separate catalogues to another drive. NO MATTER WHAT I TRY I CANNOT GET THE IMAGES TO LOAD. This is the second time this has happened and I am loathe to start reimporting copies of the RAW files only to lose them (and all the work I have done on them) again. What can i do to get the images and the ones i have adjusted back? I find lightroom a brilliant tool except for this issue of losing images and work.
View 8 Replies View RelatedI just wanted to know if there was anyway to have lightroom 4 backup catalogs upon launching the program instead of upon exiting? I know in previous verisons you were able to do this..
View 2 Replies View RelatedLIghtroom 3.6 won't start and get the following error message "Lightroom - Opening Catalog: untitled (27 0f 42).jpg.lrcat."
I have uninstalled Lightroom and re-installed and still get the same error.
I recently had to repair my Windows Home 7 Premium. Since the repair, a number of programs would not start...this System Error dialog appears:
The program can't start because .DLL is missing from your computer. Try reinstalling the program to fix the problem.
The programs were Lightroom 4.1, Acronis True Imeage 2012, AVG Antivirus and Vegas Movie Studio 10. Photoshop Elements 9 was unaffected.
I uninstalled and reinstalled all affected programs. TrueImage, Antivirus and Vegas started working again with no issues. Lightroom 4 kept showing the same error (even though the reinstall is always successful). I tried installing 4.0, 4.1 and 4.3, all of them have the same problem.
Loaded CD and it will not start
View 2 Replies View RelatedI am getting an error message saying that the application was unable to start correctly (0xc000007b) click ok to close application. Further research appears that the temp file location is not found for lightroom 3 64bit, and it wants me to find it or reinstall lightroom 3. The problem is that my software is 16hrs away from me and I forgot to register it when I got it for school in July 2010. I am not sure what I can do here, but I need it for school. Can I just download a trial version and until I can get this fixed
View 2 Replies View RelatedI just installed 3DS Max 2012 with a student license, but I encountered a problem that doesn't seem to go away. Whenever I open it, it gets to the "Starting 3DS Max 2012" screen and then freezes. The process freezes as well. Is there a way I can fix this? I have Windows 7 Ultimate, 32-Bit, and a Dual-Core Processor. My computer meets all the System Requirements except an insufficient video card.
View 4 Replies View RelatedI have a VB .NET Dll that add a new ribbon in AUTOCAD.When I load this dll from AUTOCAD, this new ribbon is well added.I'm trying to start this dll with AUTOCAD Start.
I've tried to load the DLL from the acad.lsp but the DLL is loaded before AUTOCAD load the ribbon, then the dll is well loaded but my new ribbon is not displayed !.
I have a preview cache error on start up. This persists even on re-start and LR will not progress beyond this point. I have tried a repair and a re-install but no joy. I also did a clean of the PC after to clear any registry errors too. Still the same happening. Photoshop works fine.
View 3 Replies View RelatedI have just installed Lightroom 4 and want to get started by setting up more than one catalogue but I am not sure if you have to have one catalogue for every photo in addition to the separate catalogues I want for subsets of photos. Can I just go ahead and make several catalogues and sort my photos (which are on my hard drive) into them without making a catalogue that references every photo? Maybe it's a good idea to have one complete catalogue as well in order to make it easier to find that missing photo?Also I have read that it is a good idea to store catalogue files in a separate folder in the root, which appeals to my sense of organisation, but do I need to make separate sub-folders for my individual catalogues or can they just all go into the one folder? Can't wait to get started!
View 14 Replies View RelatedI have just recently replaced the hard drive on my IMac. All files and applications have been re-installed from the time machine back up drive. LR shows up on the dock but when I open it it comes up with:"The Lightroom catalog named “Lightroom 3 Catalog” cannot be opened because another application already has it opened" and "Quit the other copy of Lightroom before trying to launch."
Do I have to reinstall LR3 from the LR DVD? I do not want to use loose the catalog structure and edit info.
I get a message saying "Application unable to start (0xc000007b)
View 2 Replies View RelatedLightroom 4.3 won't start up on my Windows 8, 32 bit machine. Install went fine but when I click on the Lr icon the program appears to start up and I get the Lr in the task bar at the bottom and when I hover over the icon I get a thumbnail of the start screen. When I hover over the thumbnail of the start screen it appears on my desktop but when I move the mouse off the thumbnail the start screen disappears from the desktop so there is no way to get past this point.
View 1 Replies View RelatedLR encountered an error at start up when reading from it's preview cache.
View 8 Replies View Related