I've downloaded Lightroom for a trial because I need better tools for my pictures. The interface for lightroom is very different and finding it a little difficult to move around and do things.
I've created a print job - a collage that I saved to a jpeg file - but every time I go to print it is still there. How do I get rid of it?
In LR4 print module the print and print one tabs are greyed out and I can't reset.
View 1 Replies View RelatedI wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
All was working OK and the printer is showing ink cartridges almost full In the Library Module the print review is fine.
Switch to Print Module and the print review is now blank (100% white)
Pictures no longer print
Windows 7
Espon Artisan 835 printer
LR5.3
I have just bought and installed Lightroom 5 and need to set my print size to A3 and in the future even bigger. I do not have the facility at home and need to have them sized correctly for the print shop so they do not have to waste time resizing them. I am at a loss how to do this. I cant find any settings for this size print. A3 is roughly 42 x 29.7 cm.
View 2 Replies View RelatedI cannot seem to reset the print template screen while in the " Print " module. It has adopted the smallest pic size with three times the normal border. I wish to reset to full screen in print module
View 1 Replies View RelatedHow to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies View RelatedEpson 3880.
Lightroom 4.
Moutain Lion.
All current.
I am trying to print on 5x7 paper. I set the page setup to 5x7. I have the margins set to .2" on each side. The layout image inside Lr looks exactly how I want it to.Then I print. I end up with a .125" margin on the left and top, and a .625" margin on the right and bottom.
It seems that, no matter how many times i save and update the profile, all the print setting (image size, sharpening, bit depth, color management, ...) are store within the preset, all but the Epson Driver settings, which have to be selected every single time.
I really can't remember if this bug was present in 4.0 or not (I'm currently running 4.1 RC), but I'm quite sure it was working OK under 3.x. Here's the thing.
I configure the printing settings and create. a profile: Profile1.I change all the settings and create a second profile: Profile2. The "Print Settings" settings are different, same printer, one for Color (Profile1), one for Advanced B&W (Profile2).I click on Profile1 (which was created with color Print Settings). Clicking on "Print Settings" or "Print", the printer settings selected under the epson driver is the ABW one (the one that belongs to Profile2).I reselect the correct setting from "Print Settings..." (Color).Click "Save" again.Righ-t click on Profile1 -> Update with current Settings. Setting seems to be saved.I then click on Profile2 and bam! The "Print Settings..." seems to be rverted to color instead of ABW.Update the correct settings, back to point #3
Can you reproduce this? This behavior is vanishig the power of the "Print One" button, unless you constantly print with tha same Driver settings.
---
Lightroom version: 4.1 RC [820174]
Version: 10.7 [3]
Application architecture: x64
Physical processor count: 4
Processor speed: 2,4 GHz
Built-in memory: 8192,0 MB
Real memory available to Lightroom: 8192,0 MB
Real memory used by Lightroom: 2388,3 MB (29,1%)
Virtual memory used by Lightroom: 4759,6 MB
Memory cache size: 866,7 MB
Displays: 1) 2560x1440, 2) 1680x1050
---
Epson R3000, latest OS X Epson Drivers.
How do I batch print several exposures at one time that differ in orientation (Landscape, Portrait) or print size (4X6 - 8 X10) or both orientation and print size? I currently have Lightroom 2.3 installed on a XP SP3 machine.
I have been unable to find any documentation on this subject.
My "Print One" button in the Print Module of LR3 is not activated. What is amiss and how do I reactivate the button?
View 1 Replies View RelatedI can't seem to get my profile start and end station labels to appear even after I checked "Label start station" and "label end station" in the profile view properties.
View 2 Replies View RelatedI got this error
Unable to start application (0xc000007b).
I already tried several fixes like:
1. reinstall all redist(x64 & x86).
2. reinstall .Net 4.0
3. Use CCleaner for Registry error.
4. chckdsk for error and fix.still error so I've gone through this.
5. I uninstall Autocad 2014 completely, uninstall it manually one by one,deleted left over folder of autodesk or similar software to it, deleted its registry keys.just like the instruction on how to remove autocad completely in autodesk, I just followed it all. [after Reboot]
6 I Re-install it and still the problem persist.
primere pro will not start... appliction unable to start correctly 0xc000007b
View 1 Replies View RelatedI want to start AutoCAD LT without the empty drawing. Just AutoCAD and the welcome screen. How can i do that? I always close the first drawing and begin a new one by choosing out of several templates or start with an existing drawing, rename and modify it. For NEW or OPEN i like to use the welcome screen.
View 3 Replies View RelatedAfter updating to OSX Mavericks, Lightroom 5 will no longer start on my MacBook Pro. Checking the system log, I see only this:
10/30/13 8:56:00.390 AM spindump[21481]: Adobe Photoshop Lightroom 5 [21388] didn't gather any samples due to audio running
10/30/13 8:56:00.406 AM com.apple.launchd.peruser.501[170]: (com.adobe.Lightroom5.30128[21388]) Exited: Terminated: 15
why Lightroom 5 will no longer start?
i've been running LR5 for 2 months and updated to 5.3 4 weeks ago.Fine till this week when it hung on start and clicking anywhere including the help menu just causes the blue working circle to turn endlessly.i've uninstalled and reinstalled but the same result. I've also tried uninstalling 5.3.
View 1 Replies View RelatedHow do you force LR to start in 64 bit?
I have Windows 7 64-bit and also downloaded LR 64 bit. But I don't see "x64" in the LR title bar. http[url]....
Can you force LR to start in 64 bit mode?
I set up a print package in lightroom v4.1 and adjusted the image in the cell to fit properly, however when I try to print to file the resulting file moves the crop to cut off the top of my subject's head. It seems that I can get around this by intentionally moving the image so that it appears to cut off her head, then when it prints it looks correct (the adjustments im doing are moving backwards?). This works for now but I have no specific control over my crop, I just have to guess and check which does not work for large quantities of images
View 1 Replies View RelatedI am trying to print a 16" x 20" photo through Lightroom's print module. I am using an Epson 3880 printer and 17" x 22" paper. I have done this in Lightroom 4 with no problems. Now I am getting a print that is 16-3/8" x 20-1/2". I have the cell size set at 16" x 20" and borderless printing is turned off. I also checked zoomed to fill. This has also happened on a couple of 12" x 18" photos.
View 2 Replies View RelatedWas printing 4x6" from LR 5.3 fine. To an Epson 3880. Then went to Page Settings (MAC) changed paper size to 8.5x11". The preview responded with a larger page. I scaled the image up to 8x10 via lightroom cell size. But when I printed to the Letter size paper, LR printed only a close to 4x6" top left corner. This was not a full image like the 4x6. It was just a corner.
Exported to PS and printed fine.Can not figure why the print will not print the full image?
I get a pop up of "Save Files To Folder", but no file names are present, so "save" does nothing. I have all the boxes checked in Print Job, e.g. print to Jpeg file. I have searched, re-read Kelby etc. and come up blank. I have a profile entered for a custom lab.
View 1 Replies View RelatedI downloaded LR 5.3 and LR 5.3 starts now every time and ask the registration questions. I always have to fill the dialog. What could I do? LR 5.2 worked fine.
View 1 Replies View RelatedI operate Windows 7 with Lightroom 3. My catalogue is held on an external drive from my PC. I have tried to open my catalogue today, but my images (17,000 plus) have disappeared, although my folders are still present. I have the RAW images backed up on a separate drive and the catalogue backed up in two parts by exporting these two sections as separate catalogues to another drive. NO MATTER WHAT I TRY I CANNOT GET THE IMAGES TO LOAD. This is the second time this has happened and I am loathe to start reimporting copies of the RAW files only to lose them (and all the work I have done on them) again. What can i do to get the images and the ones i have adjusted back? I find lightroom a brilliant tool except for this issue of losing images and work.
View 8 Replies View RelatedI just wanted to know if there was anyway to have lightroom 4 backup catalogs upon launching the program instead of upon exiting? I know in previous verisons you were able to do this..
View 2 Replies View RelatedLIghtroom 3.6 won't start and get the following error message "Lightroom - Opening Catalog: untitled (27 0f 42).jpg.lrcat."
I have uninstalled Lightroom and re-installed and still get the same error.
I recently had to repair my Windows Home 7 Premium. Since the repair, a number of programs would not start...this System Error dialog appears:
The program can't start because .DLL is missing from your computer. Try reinstalling the program to fix the problem.
The programs were Lightroom 4.1, Acronis True Imeage 2012, AVG Antivirus and Vegas Movie Studio 10. Photoshop Elements 9 was unaffected.
I uninstalled and reinstalled all affected programs. TrueImage, Antivirus and Vegas started working again with no issues. Lightroom 4 kept showing the same error (even though the reinstall is always successful). I tried installing 4.0, 4.1 and 4.3, all of them have the same problem.
Loaded CD and it will not start
View 2 Replies View RelatedI am getting an error message saying that the application was unable to start correctly (0xc000007b) click ok to close application. Further research appears that the temp file location is not found for lightroom 3 64bit, and it wants me to find it or reinstall lightroom 3. The problem is that my software is 16hrs away from me and I forgot to register it when I got it for school in July 2010. I am not sure what I can do here, but I need it for school. Can I just download a trial version and until I can get this fixed
View 2 Replies View RelatedI just installed 3DS Max 2012 with a student license, but I encountered a problem that doesn't seem to go away. Whenever I open it, it gets to the "Starting 3DS Max 2012" screen and then freezes. The process freezes as well. Is there a way I can fix this? I have Windows 7 Ultimate, 32-Bit, and a Dual-Core Processor. My computer meets all the System Requirements except an insufficient video card.
View 4 Replies View Related