Using LR 3, my finished JPG files, exported from RAW, still show a transparent grey area after image straightening/crop is applied. The problem only occurs once images are uploaded via FTP and viewed in Fotostation software.
View 1 RepliesWhen I use Lightroom with the LG 29EA93 29 inch Widescreen LED Monitor Lightroom 5 initially looks and works OK but when I try and make changes using develop I get a gray area where the image should be (see below). I have tried other resolutions and that made no difference. Other apps/programs work fine.
I tried my old monitor 1680x1050 and Lightroom 5 functions fine on that one.
The "Done" button that appears at the bottom when using the Crop & Straightening tool and others has suddenly disappeared. I thought it was a full screen issue but cycling through F doesn't restore it.
View 2 Replies View RelatedMAC OS / Photoshop CS5 As you can see in the attached image, my clone stamp selection doesn't extend out to the edges of the outline, which makes using it very clumsy to use. My PS installation at home and all the installations at this business don't do this. I've tried messing with all the clone stamp settings, resetting the clone stamp presets, and resetting the general Photoshop preferences at startup. However, nothing I've tried has had any affect. So how can I get this adjusted so that the clone stamp selected area extends out to the edges of the grey outline?
View 3 Replies View Relatedwhen I export JPEG, some metadata is not present : For example, I have Watouuu, France, but it lacks Paris. In the xmp file, the metadata is ok
I have saved the metadata with CTRL + S and I selected ALL in the list "Metadata" module export.
Importing images into lightroom 3.6 shows
1. The expected number of of frames .... but all are blank
2. The correct listing in the library index
3. The data for each image shown in the development mode ... as is the spectrum graph
I am using an up to date version of Win 7.
I just switched from lightroom 3 to lightroom 4 a few months ago, and besides lightroom 4 BEING INCREDIBLY SLOWER it was fine. Until today, when suddenly, CTRL-Z applies a random preset. And I cannot get my original image back. Even putting all the sliders back manually, I can't get my original image back.
View 6 Replies View Relatedthe basic column in the develop section of lightroom is not there, I tried the advice to right click (ctrl button on my computer) on one of the headings, but nothing showed up.
View 1 Replies View RelatedI have many sets of bracket images in which I selected one exposure and made edits.
Now I wish separately to export jpgs resized made from the raw without color changes but still cropped. (just a few are)
Using export as original will export the raw image not the jpg I want.
What I suspect I will have to do as a work a around is to export the originals then create a new temp catlog and reimport them and export as the reized jpgs I want and recrop the few that need it.
Can Lightroom (3.6) read GPS data from JPG files?
I've just encoded a batch of assorted JPGs and raw images with HoudahGeo and updated the files in Lightroom by reading the metadata from the files again. As far as I can tell only the raw images are showing GPS data as a result.
I know the date is there because
(a) I can see it in HoudahGeo if I look at the files again and
(b) Aperture picks up the locations correctly.
Is there anyway to pick these up in Lightroom?
I'm new to Lightroom and I would like to add keywords to my jpgs. These have already processed using adobe camera raw. If I add the jpgs to my catalog and then add the keywords, those keywords are not written to the jpgs when I close Lightroom. How do I add the keywords so they are searchable for example using windows search?
View 1 Replies View RelatedI recently had my hard drive replaced by Apple and did a clean install of my programs, no Time Machine.
I have LR 4.3 and CS5. I have always chosen the Edit in PS CS5 option from LR for editing individual RAW files. When I save my photo in PS, I save it as a jpg. Once back in LR, I would have to synchronize the folder in order to import that new jpg and it would show up alongside the original RAW file. Well now, after upgrading to 4.3, synching won't see that new photo that was created. It IS in Finder, but LR doesn't see it.
I have expanded stacks and no filters. Is there anything else I have to do?
If I use Filters/Metadata/File Type, no jpg's appear.
The only way I can see the photo is if I use the Text filter and write .jpg.
How can I get the jpg to show alongside the original RAW file again??
I'm also getting the "File must be saved as a copy"in the PS dialogue, when I save as jpg. Before, it would just save it as the file type is different.
I recently created a new catalog and imported all of my files into Lightroom. All my files seemed to come over, including the .jpg files. I then opened a cr2 file in LR and took it to Photoshop for editing. I saved the psd file and it appeared in my library as I expected. I then did a save as to create 3 different jpg files: filename 4x6.jpg, filename 3x5.jpg and filename 5x7.jpg.
None of these three jpgs came back to LR. So I tried to import them. When I click on the "new" option to import only the new files, these three jpgs do not even show up.
One final note, the box for "treat jpg files next to raw files as seperate files" is checked.how I can get LR to include my jpgs in my library?
I download jpg into lightroom...I only see the raws...I know the jpgs are there....but where????
View 2 Replies View RelatedI have LR5.3. I've only just noticed this. Not sure if it's been this way for a while or not. When I export from LR and make JPGs as sRGB they are more saturated. Also, when I view in the Web panel the images are more saturated. Is this normal?
View 22 Replies View RelatedI had outsourced some edits, and they sent some back via xmp, and others that were outside LR as JPG. As usual, the xmp files worked great. I had created a subfolder in one of my collections to add the jpg edits, and LR will not allow me to import!
View 7 Replies View RelatedI have Lightroom CC. I tried to export my RAW images to JPEGS, as I have done in the past, and the jpegs end up pixelated. What am I doing wrong?
View 1 Replies View RelatedI recently lost my original raw (CR2) files for a set of photos. They were imported and edited in lightroom 4.1. I still have the lightroom catalog but the photo previews are occompanied by the warning "The file name "#####.cr2" is offline or missing". I am aware they are missing, the only version of the photos I still have is the LR preview. Any way to extract the image information in a lightroom preview and save it as a jpg. (Not including doing a screen capture of the preview).
View 2 Replies View RelatedI have a book created (LR4) and cannot get the pages to export as jpg's. I hit the "export book to jpg" button and nothing happens. I am using a Macbook.
View 2 Replies View RelatedI have used LR 4 in the past, and when I wanted to export my RAW files into JPEGS I would go to File>Export. I tried to do the same with LR CC, got the page, however, I couldn't figure out what the page should be set up for so that the jpegs went into the same folder as the RAW files. They went into another folder on my C drive. Or I get an error message:
Unable to Export An internal error has occured; Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteEXW from AgWorkspace.shellExecute
How can I do what I want to do, which is to export RAW images to JPEGS?
I have a modest collection [19,500] that has a good number of same images but in different folders; need a way to find these duplicates based on image only [not by metadada, nor by file name, etc.].
Like an image recognotion function that could take a selected JPG and then scan the collection and ID any duplicates and where located.
Chasing these down manually is mission impossible; big issue is that same photo has different name in different folders.
Is there a way to delete the LR metadata from files? I can delete the xmp sidecars using the OS, but I also want to delete all the LR metadata from jpgs, etc . Is there a plugin that will do this, or do I have to use exiftool?
View 10 Replies View RelatedAnd is there a maximum number of files allowed in a batch?
View 2 Replies View RelatedHow can I import CR2 files and convert to JPGs in one step?
View 4 Replies View RelatedI have updated GPS coordinates using the new Map module but these are not output with the EXIF when I export JPGs.
I have ensured that Remove Location Info is unchecked.
When I go to import and look at my photos (previously edited in PSE9 and saved as a jpg on an external hard drive) they look great. But when I import them some of the photos look weird - too bright usually or the colour has gone all funny. I've deleted them out of LR and then tried importing them but it happens again. Only on a certain few. They are jpgs.
What is happening? In finder on the mac they look normal too. under Import on LR4 they look normal. It's just once they are imported.
Today I took some pictures, mostly RAW, but a few JPGs. Lightroom 4.1RC, Windows 7 64bit..When I use the Lens Correction feature on the RAW photos, the proper lens is selected, a Nikon AF-S NIKKOR 16-85mm f/3.5-5.6G ED VR.
When I use the Lens Correction feature on the JPG photos, the proper lens is NOT selected, instead I see it has selected a Nikon AF-S DX NIKKOR 14-24 f/2.8G ED. In fact, next to "Model", I cannot even select the proper lens (the 16-85mm lens) because its not in the list.
I shoot raw + JPG and wish that LR 5 had an option not to import JPG when there is a same-named raw file. Lacking that, are there suggestions perhaps for Windows utilities that would do the following (I am on Win7 64-bit with LR 5.2):
I delete all the JPG images before proceeding. That's easy enough; in Windows Explorer, one can sort by type, then delete all the JPGs, or one could open up a command prompt in the directory and "erase *.jpg". But there's a complication; in some modes of the camera, no raw file is generated. In those cases, I just have one .jpg that I want to keep. Here is an example:
img1.cr2
img1.jpg
img2.cr2
img2.jpg
img3.jpg
img4.cr2
img4.jpg
I want to process this directory and end up with one file of each filename, as follows, before doing my import:
img1.cr2
img2.cr2
img3.jpg
img4.cr2
The pseudocode would go something like this:
Sort files by filename fname
IF fname.jpg and fname.cr2 both exist THEN delete fname.jpg
How can I easily do this?
Is there a way to preserve the folder structure of a catalog when exporting JPGs of everything to a new location? I know there is an option to save the export into the same folder as the original file, but i am talking about a completely new location.
View 1 Replies View RelatedLR 4.3, Windows 7. I've started using Snapshots as a convenient way to capture in-process images. But, I can't find a couple things I'm sure HAVE to be in here somewhere...
1. The "generate virtual copies from all the snapshots of this image" button
2. The "export all the snapshots to jpgs or tiffs or whatever" button
I've been using Lightroom 3 for about 6 months and had no problems at all. Recently I took a bunch of photos in JPG format with my Sony Alpha A350, when I went to import them half of the images were darkened and I can't select them for import. I've always used the same camera and not used any advanced features as I'm still a novice.
View 3 Replies View Related