Photoshop :: Clone Stamp Selected Area Extends Out To Edges Of Grey Outline?
Aug 30, 2013
MAC OS / Photoshop CS5 As you can see in the attached image, my clone stamp selection doesn't extend out to the edges of the outline, which makes using it very clumsy to use. My PS installation at home and all the installations at this business don't do this. I've tried messing with all the clone stamp settings, resetting the clone stamp presets, and resetting the general Photoshop preferences at startup. However, nothing I've tried has had any affect. So how can I get this adjusted so that the clone stamp selected area extends out to the edges of the grey outline?
View 3 Replies
ADVERTISEMENT
Nov 23, 2013
Could not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. I have reset the tools restrted my computer.
View 1 Replies
View Related
Jul 2, 2013
I wanted to remove a tumb that caught the corner of the lense in a shot with the clone tool, so I choose my clone tool, select a copy of the background layer, and press alt to select my source. It doesn't work! I don't get my little plus thing. I've also noticed that I can't select part of the photo with the lasso tool either. I AM selecting the proper layer on the side! I don't get it, why isn't this working?
I've tried resetting the tool, I've tried several different files, it just refuses to let me select a source. My alt key is working, ctrl-alt-del says so.
View 4 Replies
View Related
Feb 1, 2013
I have been using the clone stamp tool for a few weeks without any problems, but a few days ago the outline of the brush disappeared. I can still clone an area and replace the undesired area, however, I can't see the exact area that will be affected because the black circle that showed the brush size is now invisible.
View 5 Replies
View Related
Oct 31, 2013
I am using PSC6 and the clone tool stamp will not paint from the sample area. After holding down the alt key to obtain sample it will not paint. I can hold the sample over the area to paint & see the cloned area visually, but it will not paint when I click. however if I click many multiple times I get a faded clone.
View 1 Replies
View Related
Nov 9, 2013
I am trying to mask out a light source in a complex figure. I have just upgraded from PSE 11 -> 12, but I doubt that is the problem. I thought the clone stamp tool in Editor was simply not working. When I'd drag (after setting a source) over the bright area, it would darken where I dragged.
From experience it seemed like it was marking the area it was going to modify - but this turned out to be the extent of the modification. It just stayed dark. Following other discussions, I adjusted my depth of history to ease RAM footprint, restarted Editor, and rebooted my Mac (OSC 10.9). I also twiddled with all the options under Clone Overlay. I could see the effects, but they did not fix the issue. When I try the Clone Stamp tool elsewhere, it does what I expect.
I'm suspecting pilot error, but don't know what else to try.
View 5 Replies
View Related
Jun 1, 2011
I press control Clone stamp, click on the area I want
I then let go and click another area to clone
Is it possible to clone multiple times (without going back to the original area)
View 2 Replies
View Related
Feb 12, 2014
How do I change from clone pattern to clone stamp
View 1 Replies
View Related
Nov 4, 2013
clone tool has worked fine, but now it does not select an area to clone from?
View 1 Replies
View Related
Jul 20, 2012
How do i use the clone stamp?
View 3 Replies
View Related
Jun 26, 2013
I installed the new version of PS right now but when I start with CLONE STAMP saw something unusual! I disabled the "Show Overlay" feature, when I press ALT and make a Copy from one place and when I want to paste it in another place sometimes it confused and past unusual, specialy sometimes is paste out of brush area, The settings of the tool is the same as PS CS6 and when I switch to CS6 I have no problem same as before.
View 4 Replies
View Related
Jul 1, 2008
try to clone stamps girl on the lefts bikini straps so it looks like shes topless.
View 1 Replies
View Related
Oct 3, 2013
The Clone Stamp no longer works right. It's slow and sampling results are all over the place. It will sample from areas I never even ALT clicked on. And it can't keep up with rapid sampling and stamping. As is, Photoshop CC is totally unusable for photo retouching work.
I switched back to CS6, which still works fine, so the problem is NOT on my end. Running Windows 7 64bit. Photoshop CC 64bit.
View 29 Replies
View Related
Jul 26, 2013
Is there a mode that allows the clone stamp to, in a sense clone itself? So if the target goes over an area that you just brushed with the clone stamp it will actually begin to clone from that, instead of the document state prior to cloning?
View 2 Replies
View Related
Jul 22, 2013
Each time i try to use my actions is says"could not use the clone stamp because the area to clone has not been defined (option-click to define a source point)" or "unable to do.
View 5 Replies
View Related
Oct 7, 2011
I have seen somewhere a way to rotate the clone stamp eye so that you can line up clones around curves etc,
View 5 Replies
View Related
May 5, 2009
how to turn off the mirroring aspect of the clone stamp in CS4 & return it to the way it worked in CS3 without magnifying & showing unfamiliar content?
View 8 Replies
View Related
May 8, 2004
I'm working on photoshop 7, and I scanned a pic in grayscale. I try to clean up some scratches with the clone stamp, but it doesn't work. Then I try to use some brushes to draw or try the eraser with many diferent sizes and it doesn't work either. I tried later with photoshop cs, but the same happens...
View 2 Replies
View Related
Mar 6, 2002
I am doing some photo retouching and have the original photo on the background layer. Now I have never been able to get my clone stamp to work when I add a "new layer" and try working on that layer. It will work on the original background image, where there are definitely pixels. But the new layer sitting on top of the background layer is transparent, and my clone stamp won't do anything
But I want to be able to retouch on the new layer without affecting the original background layer. So I'm watching this Quicktime movie by J. Kost on Advanced Photoshop Portrait Retouching (I bought the entire set from her at Fotofusion) and I am watching her do this!!! But I can't! She is retouching a portrait with the clone stamp....the transparent layer 1 is active above the background layer (ie it's highlighted) and the paintbrush well is indicating that the transparent layer 1 is what is being worked on.
I checked my opacity for this layer...it's 100%. I am working in 8bit RGB mode. PS 6.01. Blending mode is normal....
Do any photoshop gurus have any idea about what I am doing wrong? As a beginner (I have only seriously been studying photoshop for about 2 years...and I know it takes a long time), this problem has been confusing me...and not just with the clone stamp but also with the other brushes, and thus knowing when I can work on a seemingly transparent layer versus one with pixels.
View 7 Replies
View Related
Jan 23, 2009
I am having a problem with PS CS4 when I go to use the clone stamp tool I get an error message stating "could not use clone stamp because of a clone stamp error" I searched around but only found topics relating to cs3. I am using a Gateway gt series with Vista home premium Nvidia GEforce 8500 video card and 4 gb ram.
View 5 Replies
View Related
Sep 30, 2005
step 3 i have to use the clone stamp tool. But when i press ALT, my cursor changes to a double arrow! A white arrow and a black arrow, and the black arrow overlaps the white arrow for 80%. I guess thats not right, i should get a circle with a + in the middle of the circle right?
When i press alt and click mouse button, nothing happends. When i do that, and click somewhere at the image, i get the error that no area has been defined.
View 7 Replies
View Related
May 22, 2006
i am having issues with my clone stamp. it just does NOT work! i alt-click to assign the area and then click where i want it to cover, and NOTHING happens. I use CS at work and v6.0 at home. v6 works fine and, at work, CS doesnt work.
View 6 Replies
View Related
Nov 28, 2013
When trying to use the clone stamp, I get a message that syas the area to be cloned has not been defined-click to define a source point. Everything I have tried does not work. What do I have to do to use the clone stamp????
View 5 Replies
View Related
Apr 30, 2013
I try using the clone stamp but selection fails with this error message:Could not use the clone stamp because the area to clone has not been defined (Alt-click to define source point).
When I press Alt, I see the characteristic selection bullseye. But, afterwards, a right-click of the mouse reveals an open circle and the error message.I note that the key works for menu selections (e.g., Alt-File) and other actions.I have closed PS and re-opened. Reset the clone stamp tool, closed and reopened, etc., to no avail.
View 8 Replies
View Related
Aug 19, 2013
having problems with photoshop 5.5... new issue for me, as there weren't any issues yesterday. both the 'healing brush tool' and the 'clone stamp tool' are giving problems. when i press the alt key to collect an area to sample, on my screen it looks as tho the hand tool engages, and there is a second (copy looking) image moving around my screen over the original. i've already tried the 'tool reset all' function and rebooted... still haveing the same issue.
View 5 Replies
View Related
Nov 8, 2013
I am using PS 5.1. The cloning stamp tool has never worked.
If I alt/opt and click to attempt to select my source for cloning it does nothing. There are no presets on the cloning stamps and all settings are at zero.
I am running a MAC OS X recently updated system. I use a MS compatible wireless key board. All other PS short cuts works with this key board and always have I just have to use the PC short cuts. The only item changed in preferences for CS 5.1 is the way my mouse is display with crosshairs.
View 1 Replies
View Related
Oct 13, 2012
If I have two layer and I want to use "Clone stamp tool" to clone from layer one to layer two ?
View 5 Replies
View Related
Sep 30, 2013
My sister wants to do a stop motion and she would like to remove a stone on every picture.
I tried to make a script, but when I apply it it doesn't change anything, so I wanted to know if it is possible to use the clone stamp with scripts, and if yes, how ?
View 2 Replies
View Related
Nov 27, 2012
I am trying to use the clone stamp tool, however each time I alt click on a PC runing system 7- 64 bit and try to clone an area, I get a window stating that I have not defined an area. Alt clicking again does not solve the problem. I work in a computer lab and this option works fine on our Macs using option click in PS CS6.
View 2 Replies
View Related
Jun 1, 2012
Is there any alternative to Clone Stamp tool's Alt-click? I am currently teaching an introductory photoshop course for disabled persons and one of my students has a condition that prohibits him from using the mouse and the keyboard at the same time. Is there perhaps some way to customize this command?
View 2 Replies
View Related
Oct 13, 2013
When I try to clone in versions beyond PS3 the clone stamp is not transparent. I can't see what's underneath, it got fuzzy pixels. How can I set this to behave the way it used to.
View 3 Replies
View Related
