I have updated GPS coordinates using the new Map module but these are not output with the EXIF when I export JPGs.
I have ensured that Remove Location Info is unchecked.
How GPS coordinates are written to EXIF in LR4.
Here's the bottom line: I understand how to insert coordinates into a photo's EXIF. I can clearly see the coordinates when viewing EXIF within LR4, but that's where the trail ends.
I am trying to view the GPS EXIF data in multiple other programs and I just don't see it anywhere. I also participate in an web sharing site that automatically maps photos upon upload, assuming the coordinates are in the EXIF. This isn't working for me either. As a test I uploaded a file that had coordinates written to EXIF (according to LR4), and then downloaded that image back to my PC, and re-imported it to LR4 ... I can see all EXIF except no GPS coordinates.
For all practical purposes, it appears LR4 is not really writing the coordinates to EXIF except for what is displayed inside the shell of Lightroom.
Is there a way to preserve the folder structure of a catalog when exporting JPGs of everything to a new location? I know there is an option to save the export into the same folder as the original file, but i am talking about a completely new location.
View 1 Replies View RelatedSince today I'm using "Lightroom 5.3 RC for Windows". When I export to jpg the Exif meta data contain a Exif tag "Software", the value is "Adobe Photoshop Lightroom 5.0 (Windows)". Why doesn't this tag show the version number "5.3" (or "5.3 RC")?This behaviour has been at all prior Lightroom versions I know.
View 2 Replies View RelatedI'm editing .mov 1080p video clips from my DSLR in Lightroom 4.4. I,m using the slider bar to set a new "inpoint" and "outpoint," shortening the video. When I export, I am using the original format and new file name. Lightroom tells me the video is shorter in length, but when I play it back in Windows, the new file is the original length. What am I failing to do/see here? I'm using Win 7
View 1 Replies View RelatedWhile asking another question, I discovered problem I'm having when I save .jpgs. tested this with several images now.When I save an image, it always gets HEAVIER, even if I save it at an image quality of "5" instead of my usual "12."
Attached is a donkey. It's 200px wide and 53k.When I saved it, changing nothing the name, using "baseline standard" and a quality of "5," it STILL becomes 127k. then I tried to save it to another folder, using a quality of 0, as in ZERO, and it became 123k.
I made a coloured square in PS. I saved it as a JPG. I saved it as a PNG. I saved it as a PSD. I dragged all three of these into InDesign. The JPG and the PSD were the same colour. The PNG was different. Now, before you all say that PNG's do funny things to colours, let me just say that the PNG was the ONLY one out of the three that matched a coloured square I made in InDesign with the same RGB values as what I made in PS. Both programs were using the same colour settings.
Just for interests sake, I tried the same experiment in Illustrator. Interestingly, I had no problems in Illie - all 3 (JPG, PNG and AI) files were the same colour as each other AND the same colour as the test square in InDesign.
I design graphics for Scrapbooking kits which I am beginning to sell and need both JPGS and PNGS (because of transparency) for these kits. AND I need the colour to be consistent. I also design in Illustrator (where there appeared to be no problems), but obviously there are some things that are simply not possible in Illustrator.
Is there any way to export coordinates of a point created using the paths tool? I'm trying to determine the distance of each of the points in the attached picture from the blue mid line.
View 2 Replies View RelatedWhen a raw file badge shows that the file has been changed, I use Metadata Save to File & for the large majority of my images, the badge goes away and Metadata Status Changed does not show the file. For some of my files, however, the Save to File command doesn't work properly. If I am only displaying files with changes, the file briefly disappears, then returns. Even if I go to Windows Explorer and delete the xmp file, then again Save metadata to file, it pops up again with the badge saying it needs to be saved. I'm using Lightroom 4.3 64 bit on Windows 7.
View 12 Replies View RelatedCode that I can run to export the handles and x y coordinates of closed polylines and show results in a text file.
View 9 Replies View RelatedIs there a way of exporting saved UCS views to another drawing?
View 3 Replies View RelatedI created a Web Gallery and forgot to update the folder name for the FTP server.
How can I update the saved gallery? If you change module and double click again on the saved gallery icon, the changes are lost.
Here is what I get via right click:
How do you solve this without the need to delete and save the gallery again?
I have many sets of bracket images in which I selected one exposure and made edits.
Now I wish separately to export jpgs resized made from the raw without color changes but still cropped. (just a few are)
Using export as original will export the raw image not the jpg I want.
What I suspect I will have to do as a work a around is to export the originals then create a new temp catlog and reimport them and export as the reized jpgs I want and recrop the few that need it.
Can Lightroom (3.6) read GPS data from JPG files?
I've just encoded a batch of assorted JPGs and raw images with HoudahGeo and updated the files in Lightroom by reading the metadata from the files again. As far as I can tell only the raw images are showing GPS data as a result.
I know the date is there because
(a) I can see it in HoudahGeo if I look at the files again and
(b) Aperture picks up the locations correctly.
Is there anyway to pick these up in Lightroom?
I'm new to Lightroom and I would like to add keywords to my jpgs. These have already processed using adobe camera raw. If I add the jpgs to my catalog and then add the keywords, those keywords are not written to the jpgs when I close Lightroom. How do I add the keywords so they are searchable for example using windows search?
View 1 Replies View RelatedI recently had my hard drive replaced by Apple and did a clean install of my programs, no Time Machine.
I have LR 4.3 and CS5. I have always chosen the Edit in PS CS5 option from LR for editing individual RAW files. When I save my photo in PS, I save it as a jpg. Once back in LR, I would have to synchronize the folder in order to import that new jpg and it would show up alongside the original RAW file. Well now, after upgrading to 4.3, synching won't see that new photo that was created. It IS in Finder, but LR doesn't see it.
I have expanded stacks and no filters. Is there anything else I have to do?
If I use Filters/Metadata/File Type, no jpg's appear.
The only way I can see the photo is if I use the Text filter and write .jpg.
How can I get the jpg to show alongside the original RAW file again??
I'm also getting the "File must be saved as a copy"in the PS dialogue, when I save as jpg. Before, it would just save it as the file type is different.
I recently created a new catalog and imported all of my files into Lightroom. All my files seemed to come over, including the .jpg files. I then opened a cr2 file in LR and took it to Photoshop for editing. I saved the psd file and it appeared in my library as I expected. I then did a save as to create 3 different jpg files: filename 4x6.jpg, filename 3x5.jpg and filename 5x7.jpg.
None of these three jpgs came back to LR. So I tried to import them. When I click on the "new" option to import only the new files, these three jpgs do not even show up.
One final note, the box for "treat jpg files next to raw files as seperate files" is checked.how I can get LR to include my jpgs in my library?
I download jpg into lightroom...I only see the raws...I know the jpgs are there....but where????
View 2 Replies View RelatedI have LR5.3. I've only just noticed this. Not sure if it's been this way for a while or not. When I export from LR and make JPGs as sRGB they are more saturated. Also, when I view in the Web panel the images are more saturated. Is this normal?
View 22 Replies View RelatedI had outsourced some edits, and they sent some back via xmp, and others that were outside LR as JPG. As usual, the xmp files worked great. I had created a subfolder in one of my collections to add the jpg edits, and LR will not allow me to import!
View 7 Replies View RelatedI have Lightroom CC. I tried to export my RAW images to JPEGS, as I have done in the past, and the jpegs end up pixelated. What am I doing wrong?
View 1 Replies View RelatedI recently lost my original raw (CR2) files for a set of photos. They were imported and edited in lightroom 4.1. I still have the lightroom catalog but the photo previews are occompanied by the warning "The file name "#####.cr2" is offline or missing". I am aware they are missing, the only version of the photos I still have is the LR preview. Any way to extract the image information in a lightroom preview and save it as a jpg. (Not including doing a screen capture of the preview).
View 2 Replies View RelatedI have lightroom 3. I have set my camera on shooting in jpg and raw. I import them both and get them as 1 picture in lightroom. When I rate the picture with a star and I save it to the exif data it only saves it to thseperate xmp file. Also if I rotate the picture it only writes it in the separate file. I want to save also the exif data to the jpg file. How can I do this in one go?
View 17 Replies View RelatedI have a Panasonic GH3 camera. I would like to add an item that is in the EXIF data of the RAW and DNG file to the EXIF fields kept by LR5. I can see all the camera EXIF data by using the GREAT 'exiftool.exe' created by Phil Harvey.
[URL] ......
Just to start, I would like to add the item "Focus Mode" that is in the "Panasonic" section of the EXIF file of the RAW and DNG files. The Focus Mode field has values such as:
Example 1:
---- Panasonic ----
Image Quality : Raw
Firmware Version : 0.1.2.0
White Balance : Auto
Focus Mode : Manual
AF Area Mode : 1-area
Image Stabilization : Off
Macro Mode : Off
Shooting Mode : Aperture Priority
or, as anoher example:
Example 2:
---- Panasonic ----
Image Quality : Raw
Firmware Version : 0.1.2.0
White Balance : Auto
Focus Mode : AF-S
AF Area Mode : 1-area
Image Stabilization : Off
Macro Mode : Off
Shooting Mode : Aperture Priority
I find this data in both the Panasonic Raw files, and the DNG files created by LR5 (and I was very relieved to find that the Focus Mode is carried forward to the DNG files, since I don't keep my old Panasonic RW2 Raw files after they are converted to DNG!).
So, since this camera manufacturer data *is* in the DNG, LR5 *is* reading it.
Thus my question: How can I tell LR5 to inclued the "FOCUS MODE" value in the EXIF data it creates with each photo?
I have a book created (LR4) and cannot get the pages to export as jpg's. I hit the "export book to jpg" button and nothing happens. I am using a Macbook.
View 2 Replies View RelatedI have used LR 4 in the past, and when I wanted to export my RAW files into JPEGS I would go to File>Export. I tried to do the same with LR CC, got the page, however, I couldn't figure out what the page should be set up for so that the jpegs went into the same folder as the RAW files. They went into another folder on my C drive. Or I get an error message:
Unable to Export An internal error has occured; Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteEXW from AgWorkspace.shellExecute
How can I do what I want to do, which is to export RAW images to JPEGS?
I have a modest collection [19,500] that has a good number of same images but in different folders; need a way to find these duplicates based on image only [not by metadada, nor by file name, etc.].
Like an image recognotion function that could take a selected JPG and then scan the collection and ID any duplicates and where located.
Chasing these down manually is mission impossible; big issue is that same photo has different name in different folders.
Is there a way to delete the LR metadata from files? I can delete the xmp sidecars using the OS, but I also want to delete all the LR metadata from jpgs, etc . Is there a plugin that will do this, or do I have to use exiftool?
View 10 Replies View RelatedAnd is there a maximum number of files allowed in a batch?
View 2 Replies View RelatedI have a Metadata preset for my copyright info and eversince I created it, it has been stripping the capture infor from the image (ie Focal Length, ISO, F-Stop, etc), the preset does not delete this info from the image upon import?
View 1 Replies View RelatedIs there a way to export jpegs with some exif info (creation date and tile) which should be saved directly on the image. Like the showing of the timestamp on the picture which can be turned on on some cameras.
Reasoin is: I want to use those pics on a digital image frame and I want to show some image data as well. As there are no options in the software of the digiframe to display exifs I have to integrate them in the pictures...
if it is not possible with lightroom then probably you can tell me another way (bridge, photoshop, ...) - just not manually...