I just switched from lightroom 3 to lightroom 4 a few months ago, and besides lightroom 4 BEING INCREDIBLY SLOWER it was fine. Until today, when suddenly, CTRL-Z applies a random preset. And I cannot get my original image back. Even putting all the sliders back manually, I can't get my original image back.
View 6 RepliesI'm currently using Civil 3D 2012, and all of a sudden CTRL+Z has stopped working as UNDO. It does nothing. I've found this issue in lots of other outdated forum posts, but none seem to relate to Civil 3D 2012. I went into CUI to see if the shortcut was somehow changed, but the UNDO command still points to CTRL+Z as its shortcut.
View 7 Replies View Relatedwhen I export JPEG, some metadata is not present : For example, I have Watouuu, France, but it lacks Paris. In the xmp file, the metadata is ok
I have saved the metadata with CTRL + S and I selected ALL in the list "Metadata" module export.
Importing images into lightroom 3.6 shows
1. The expected number of of frames .... but all are blank
2. The correct listing in the library index
3. The data for each image shown in the development mode ... as is the spectrum graph
I am using an up to date version of Win 7.
Using LR 3, my finished JPG files, exported from RAW, still show a transparent grey area after image straightening/crop is applied. The problem only occurs once images are uploaded via FTP and viewed in Fotostation software.
View 1 Replies View Relatedthe basic column in the develop section of lightroom is not there, I tried the advice to right click (ctrl button on my computer) on one of the headings, but nothing showed up.
View 1 Replies View Relatedas the place I work at recently upgraded their PS version to CS6 and basically rendered my Intuos 4 completely useless because of the damn Alt/Ctrl modifier, which seems to control the "drag to create a copy of the layer function" regardless of the tool you're using.
It might be specific for my region, but Alt+Ctrl or Alt Gr modifer is used in order to reach certain keystokes, such as ], [, @, so when by default the brush size function on my wacom is linked to a "[" (alt+ctrl+f windows function), my tablet completely flips out and starts sending a mix of Alt, Ctrl and Alt + Ctrl function controls instead of the [ which I'm trying to use.
Alt + w/e functions work just fine, but I can't use any modifer using the alt+ctrl+w/e combo that involves creating a symbol, even while using the keyboard. For example, I can use the alt+ctrl+z command to undo something, but if I linked my brush tool to a "§", which is invoked by calling the alt+ctrl+m windows command, it will act as a normal ctrl + m command and open the curves window.
I don't know what happened when i opened my autocad it looks like the image below Untitled.jpg
also if i will right click on the drawing space, nothing happens, but below or in the command window, i can, also for example i drew a line, and i want to redo, the "CTRL" function using ctrl+Z is disabled, what happened with this one?
I think it'd be so cool to be able to replay your entire undo history of a picture, so you can see and show others how you proceeded on a picture you made. That way, it's never necessary to capture screen video for like 10 hours and stuff..
So first you'd need to add an option to save the undo history (so that you always keep the history from when you started). Then you'd need an option to playback the undo history.
Is there a way to undo without zoom as part of the undo?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
I have a problem understanding how undo marks are added to the undo stack.In the code below a fan of lines are draw in a random location.If you run MTest a few times, the AutoCAD Undo command will remove the fans one at a time.
If you run MMulti to draw 10 fans, the AutoCAD Undo command will remove all the fans in a single step.I want to be able to remove the fans one at a time.I thought that a StartTransaction / Commit pair would act as markers for the undo stack, but this isn't working.
Tested on AutoCAD 2010 VS 2008
<CommandMethod("MMult")> _
Sub testmult()
Dim i As Integer
For i = 1 To 10
Call testdraw()
Next
End Sub
[code]....
I just downloaded PS CS6 and LR 4 to both my desktop and laptop. From LR, I use control + E to push the raw image over the PS CS6 and it works on my laptop but *not* on my desktop. I have LR 4.1 and also camera raw 7.1 on both my laptop and desktop so I'm updated.
For some reason on my laptop I'm able to successfully use control + E to push the raw image to CS6 and it opens sucessfully but *not* on my desktop. When I do this on my desktop it just opens PS CS6 but that's it. The raw image never appears.
I've made sure that the LR 4 preferences setttings are the same on both my laptop and desktop. I've even rebooted.
How can I undo changes made in Lightroom 4 and exported as TIFF file? Need to find my "original" raw file?
View 2 Replies View RelatedWhen I drag a layer mask to the trash, it applies the mask instead of deleting it, removing all masked out pixels. I don't believe this was the case before CS6. Is there a way to adjust this setting and make it simply delete the mask?
Right-clicking still gives me the option to delete the mask properly.
I have a bunch of pipes which are flagged with a warning called "Rule applies to pipe only runs". for these pipes, the pipe proterties window will not report the min and max cover. the pipe rule i have currently set is a "pipe to pipe match" with match location as invert and drop value as zero, and a cover only rule with min cover 2' and max cover 15'. the structure rule i have set has "sump depth" of zero, and a "pipe drop across structure" set as invert reference and a drop value of zero.
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
When importing pics from a particular folder this morning, I must have accidentally asked Lr to import my photos from my desktop, but because all subfolders are listed, it's imported 27000 or so images from all over my computer. This is an absolute disaster because it's not just taken a copy, it seems to have transferred them or sucked them into Lr.
How I can undo the import?
I just imported from another catalog. I had two catalogs from the same event, one with some previous processing I had done, and another with all of my ratings made. I must have done this backwards, as all of my ratings are now gone! This was about 10+ hours of work, so I am hoping I can undo this??? How I could recover and undo that last import? I thought it would just sync, but I did not. I have not closed the catalog, although I'm not sure it makes a difference.
View 3 Replies View Relatedwhy do images saved on dvd play randomly on my tv?
View 2 Replies View RelatedUsing ligntroom 4 from the cloud setup, is there any kind of setting I can use to defeat the big blotto sign that pops up just under center screen in "Develope" mode when you Ctrl-z (undo)/Ctrl-y(redo)?
When you have the image in single image view and so quite large, when in full screen, that UNDO thing pops up right in the most likely place you are carefully watching to see the changes. And it is absolutely huge, at least for something that is apparently meant to be a gentle reminder for the event where you didn't do it on purpose.
Maybe a small picky thing but I can think of no reason that sign needs to be so "In your face", why not down in a corner and in font many times smaller.
At any rate, what can I do to get rid of it or move it to a less obnoxious location?
When I went into LR4 just now I must have hit a button and all of my 700+ edited images from a specific collection started changing back to their original state. What did I push? How do I get them back without having to do it one by one in the history mode?
View 1 Replies View RelatedHow can you undo the Photo menu option "Update DNG Preview & Metadata" in the Develop module?
I accidentally hit this at which point Lightroom added a "From Metadata" entry to the history for the file. It also seemed to update the preview for the file (as seen with before / after).
I tried to undo the change, but all Lightroom did was remove history items ("From Metadata" remained at the top, all the edit sliders stayed the same (even though history was being removed) and the "before" image was permenantly changed.
Not even resetting the image from Library -> Photo -> Develop Settings -> Reset, then "Update DNG Preview & Metadata" worked.
Is the only way back from this operation to delete the DNG and reimport? It's not as if Lightroom warns you that the operation cannot be undone as with the "Read Metadata from File" command.
I'm using Lightroom 3.6 on Windows 7 SP 1.
cannoscale applies the current annoscale to all objecs...i would like to apply it to specific objects?
View 6 Replies View RelatedHow to Undo image adjustments that are not the most recent change
View 27 Replies View RelatedI accidentally removed a folder with images from my lightroom catalog. The lightroom .lrcat file seems to be intact (112.400kb) and the images are still on my hard drive.
Is there anyway that i can reimport the folder and that lightroom applies the changes that i earlier made on them? I assume all that information is stored in the catalog file? But when i try to reimport them, no changes are being made.
Working on an iMac in LR3, I thought I was deleting one unwanted file from disk, but actually had all 22 edited images highlighted and deleted them all. I need to undo 'delete from disk' on edited files, however 'undo' is greyed out and command Z is ineffective. I see them all in the trash and the preview shows how they appeared with my edits. When I did this once before, I moved images out of trash back into original file on the hard drive and reimported into LR3, however the edits were not maintained. I need to retain these edits (days of work!) so how do I undo my mistake?
View 8 Replies View RelatedIf LR 5 included the ability to undo a specific change fro the history panel? This ? was asked in 2007, undoing "#3 out of 50". At present, would have to CTRL Z all the way back OR manually adjust all slider bars.
View 1 Replies View Relatedscript that would sample the underlying color of anchor points in a selected gradient mesh and apply it to them? I was just thinking of ways to speed up the process of creating a vector drawing based on a picture so that all you would have to do is model your mesh and then let the script apply the colors.
View 2 Replies View RelatedI have been using LR for a while and randomly started having an odd problem. After importing some images I was flipping through them in the Library Module and the loading animation was coming up across the bottom. After the loading animation stops, the colours willsaturate or the exposure will change slightly. If I go to the develop module, the history only includes the import and no sliders have been repositioned. Please check out the before/after pictures for clarification (hard to notice but the table cloth changes hue and saturation). I have default settings on quick develop, so it's not that.
View 1 Replies View RelatedI am missing a feature to sort pictures randomly in Lightroom. Often, when I compile photos from different times/locations etc I would like to show them in a slideshow randomly. Today I don't find this sorting option in LR.
View 2 Replies View RelatedSometimes I switch back and forth between images while working on them. If I use Ctrl-Z to undo changes it will jump back to the previous image and start undoing changes there (if I made changes in that order). Is there a way to make it stay on the current image and undo changes made before switching images? If not, that would be a useful feature.
View 2 Replies View RelatedI'm working on a time lapse sequence and when I apply the new clarity slider in LR4 to the batch of images the effect seems to apply itself very specifically to each frame introducing random variations in tone and exposure that cause unwanted "flicker" in the sequence. I'm adjusting one image and then syncing it's adjustments to the batch. Is there another way to do this that will apply a fixed value without reinterpreting each and every photo?
View 6 Replies View Related