Lightroom :: 4 - Cannot Get Ctrl E To Successfully Push Raw Image To PS CS6
Jun 24, 2012
I just downloaded PS CS6 and LR 4 to both my desktop and laptop. From LR, I use control + E to push the raw image over the PS CS6 and it works on my laptop but *not* on my desktop. I have LR 4.1 and also camera raw 7.1 on both my laptop and desktop so I'm updated.
For some reason on my laptop I'm able to successfully use control + E to push the raw image to CS6 and it opens sucessfully but *not* on my desktop. When I do this on my desktop it just opens PS CS6 but that's it. The raw image never appears.
I've made sure that the LR 4 preferences setttings are the same on both my laptop and desktop. I've even rebooted.
View 8 Replies
ADVERTISEMENT
Feb 18, 2003
Say I want to extract a photo of someone and put it onto another picture with all of their strands of hair intact etc - I know you are meant to extract the image in 'extract' and do the highliting and filling etc, but I find this never works. I always get left with a jagged, bitmapped edge, no matter how much I play with the tolerance thingy.
Can someone tell me a definitive way of cutting a face out, as if it were Dirk Benedict on the cover of Corvette Monthly with all of his beautiful strands of hair on show?
View 2 Replies
View Related
Nov 24, 2013
I have installed PS CC without any problem, but when trying to install Lightroom5 on my Mac, I get the following message:
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
View 1 Replies
View Related
Dec 3, 2013
I just signed up to the PhotoShop & Lightroom Cloud. Photoshop installed OK But Lightroom fails to instal. It give 2 errors:
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Photoshop Lightroom 5.pkg failed with exit code: 1
I am trying to instal on a Macbook Pro 2010 running OS-X 10.6.8 with 8 GB of RAM and 535 GB of free hard disk space. I have tried the installation process twice to no avail. Currently running version 4.4 of Lightroom without a hitch.
View 5 Replies
View Related
Nov 9, 2013
as the place I work at recently upgraded their PS version to CS6 and basically rendered my Intuos 4 completely useless because of the damn Alt/Ctrl modifier, which seems to control the "drag to create a copy of the layer function" regardless of the tool you're using.
It might be specific for my region, but Alt+Ctrl or Alt Gr modifer is used in order to reach certain keystokes, such as ], [, @, so when by default the brush size function on my wacom is linked to a "[" (alt+ctrl+f windows function), my tablet completely flips out and starts sending a mix of Alt, Ctrl and Alt + Ctrl function controls instead of the [ which I'm trying to use.
Alt + w/e functions work just fine, but I can't use any modifer using the alt+ctrl+w/e combo that involves creating a symbol, even while using the keyboard. For example, I can use the alt+ctrl+z command to undo something, but if I linked my brush tool to a "§", which is invoked by calling the alt+ctrl+m windows command, it will act as a normal ctrl + m command and open the curves window.
View 3 Replies
View Related
Jul 3, 2012
I don't know what happened when i opened my autocad it looks like the image below Untitled.jpg
also if i will right click on the drawing space, nothing happens, but below or in the command window, i can, also for example i drew a line, and i want to redo, the "CTRL" function using ctrl+Z is disabled, what happened with this one?
View 9 Replies
View Related
Sep 8, 2012
Why is the "Ctrl H" option always on when I open an image in CS5?
View 19 Replies
View Related
Nov 24, 2013
I just switched from lightroom 3 to lightroom 4 a few months ago, and besides lightroom 4 BEING INCREDIBLY SLOWER it was fine. Until today, when suddenly, CTRL-Z applies a random preset. And I cannot get my original image back. Even putting all the sliders back manually, I can't get my original image back.
View 6 Replies
View Related
Jan 25, 2012
When I insert a threaded part from the Content Center I get this message "unable to successfully update the member part file, problem occurred when setting thread data" The fastener will insert but the threads are very small.
View 7 Replies
View Related
Dec 6, 2005
I am willing to do a text that is pushed-in in the sand as a foot mark.
How to do it or what effect or transfer mode to use ?
View 2 Replies
View Related
Jan 21, 2012
I can tell you cannot Gateway Import from a drive that is Read-Only. The clip seems to work, it just says pending render, of course when you import a large number of files it always says pending render. Unfortunately it never actually finishes pending render, and will list as failed in Backburner.
So you can for instance think you have relinked an entire timeline and start doing a fair amount of work on it, but you will then be unable to send this large timeline to your flame like you think.
There is no god damned reason it should allow you to gateway import something that you cannot actually gateway import. All it would need to do is check if the drive is read only before it does it and give you an error message IN THE APPLICATION. Rather than everything looking fine, but then making you go tease the meaning out of this from backburner:
smk001 1896942624 swBIOSubJobServer.C:298 01/21/12:18:14:05.450 1896942624 swBIOAdapter.C:403 01/21/12:18:14:06.504 Cannot process tasks 0... in /var/tmp/WireJob/SubJob0.
Read-only file system on processing S+W server..The fact that the color correct house had randomly given me an NTFS drive this time didn't occur to me for quite awhile, since the last two were both macOS.
View 5 Replies
View Related
Nov 1, 2012
I'm running a batch process to apply a certain action. This action selects a color in the image, then switches to the alpha channel, selects a new background color, then deletes the content selected, leaving the area with a new rgb value. The problem is that not all the images have that color, so when it goes to select it, it doesn't find it.
Then an error pops up informing me that the delete funciton isn't available, since there's nothing selected. I've tried logging them to a file, but even then, the action stops at that step and moves onto the next image. Therefore it never makes it to the close step, so they remain open.
View 1 Replies
View Related
Jun 6, 2013
I am creating PDF files through the publish button on AutoCAD LT 2014 and I have had a client ask me of the PDF files are PDF/A compliant. I have search and found nothing on the subject.
View 3 Replies
View Related
Apr 2, 2013
I want to use i Logic to retreave or push the i Property of "Project" from my skeleton file to the rest of the parts and assemblies in the project.
View 9 Replies
View Related
Oct 10, 2013
The four squares all have a 0px top and bottom Push Margin set, which I would have thought would have meant I could have butted them up directly next to each other (but not overlapping).
However you can get them very close but not touching.
View 7 Replies
View Related
Mar 21, 2012
I would like to shell out this volume. Is there any way to push the flat surface down into the volume to accomplish this? See attachment: Volume.jpg
View 1 Replies
View Related
Sep 8, 2012
If I right click on the selection & go to edit copy, I can copy OK.
If I type control "C", the Create Clip window pops up and it wants me to insert the previous copy I did.
This same thing happened to me 4 months ago & I overcame it somehow; but then I reloaded Gimp and I am now back to where I once was.
I want to push control C of a selection and the paste it. But it makes me do it the long way, right click menus.
View 1 Replies
View Related
Jul 12, 2013
I'm recieving this wierd, almost pixelated burn in my brush whenever I push down my pen onto my Intuos4 tablet. It's happening with ALL of my brushes regardless of presets or whatever kind of textures or effects I have on them. This image is from a fresh document, there are no filters or any other effects running. Just a colored brush producing these weird pixels.
I'm running Adobe Photoshop CS6 on Windows 7 - Intel Core i7-3770K CPU @ 3.50GHz 3.90Ghz - 8Gb RAM - AMD Radeon HD 7700 Series.
View 2 Replies
View Related
Feb 15, 2013
Using the axis transition how would I go about creating a push, it sounds so simple but I've been screwing around for a little bit and haven't done it.
I've done a "slide in" on my incoming clip but thats just half of it. Also, I saw somewhere that you can reveal the axis nodes on a timeline axis effect, but I'll be damned it I cant remember how.
View 2 Replies
View Related
Mar 28, 2012
Will AutoCAD convert standard to metric with the push of a button? Do you have to convert them manually? If the answer is yes which versions will?
View 7 Replies
View Related
Jul 23, 2013
i have problem with my cad. When i push in scroll button in old settings i saw hand (pan function) and it was easy to move. Now when i push in scroll button i see cross with arrows and moving where i want is difficult. How can i change it (i want use pan function when i push in scroll).
View 3 Replies
View Related
Apr 17, 2012
I have just recently upgraded to 2013.I have one color in particular that use dto be grey - now it is red. I have repaired the appearance so it looks correct in a part. I was able to save this backto the library, overwriting the original. This is all good. I am unable to find out how to push this updated appearance to all parts in an assembly. I used to be able to do this with the update styles tool.
View 1 Replies
View Related
Aug 19, 2013
if there is a simple way of pushing multiple Polylines to meet a final line that I draw.For instance if there is a zigzagged line, and I drew a line through the middle of it (in a similar direction).
Is there a command or script that would push all of the points on the zig-zag to meet with the straight line I drew?
View 9 Replies
View Related
Jul 27, 2012
I know you can "pull" styles from a drawing (maybe the template) into your current drawing.
Is there a way to "push" them from the current drawing to another on?
Here is what I am picturing:
Right click on a style on the settings tab and choose "Send to Template"
"Template" would either be a predefined DWT file or it would open a standard file selection dialog to select one.....and this would copy the selected style into the template.
View 9 Replies
View Related
Aug 1, 2013
Just converted from 14LT to 2014LT. In 14LT, when drawing a shape, say 4' by 5', I used to be able to draw the first two lines, 4' and 5' and then simply push the up arrow to retrieve the last two entries at the command line. When I do that now, it gives me some sort of dimensional coordinates.
Also, same subject, different useage, when drawing from points to points, I used to be able to draw a line from a point to a snap point such as intersection and then simply push the up arrow to retrieve that command to the command line over and over depending on a snap by snap basis. Again, it just gives me the dimensional coordinates.
View 2 Replies
View Related
May 29, 2012
I need to design a 'stencil' of sorts - but it just needs to be an array of circles separated by a constant distance. its an array of 200 micron diameter circles separated by a distance of 500 microns each (between centers). Its super easy to make this array, but when I try to 'pull' it into the third dimension, or extrude the array, I get an 'invalid' error. Or the highlighted objects just get 'unhighlighted' (for the lack of a better word) once i hit enter after selecting them all. Also, I made the entire array into a 'block' of easiness.
View 7 Replies
View Related
Nov 7, 2011
I wrote some code in VB .NET 2010 getting started from Kean Walmsley project to create a new layer. I did it working directly from code and not using a command line as he did.
[URL] ...
The problem is that the same code works if I call it directly inside the application code, but doesn't if I throw it from a push button.
I get the eLockViolation error code.
View 3 Replies
View Related
Dec 5, 2011
I am wanting to display previews (pngs) of the ai files in the plugin that match search criteria on a button. As the user scrolls through the results, change the button picture to be the png for that ai file. I tested it with a default image in case the image doesn't exist. The test image is cropped to the size of the button.
The pngs are necessarily 600x600 pix. (For other applications). I want to resize them for display on the button.
(The button is only 100x100).
Do I need to use Image/Drawer suites?
View 2 Replies
View Related
Nov 23, 2004
Using photoshop, I found this shortcut really helpful, especially when I just started learning layer masks. Then all of a sudden it stops working! I can't do this action anymore unless I go to EditStep Backward.
View 2 Replies
View Related
Sep 25, 2013
Is there a to access the Alt key screen functions (the quick Eyedrop, (holding Alt and click the color) and the Zoom in and Zoom out (holding alt alt and scrolling with the mouse wheel) with other key instead of alt, for instance the Ctrl key?
It is really annoying to me to deal with it, because in my shortcut configuration I use the keys "Q" and "W" to increace and decrease the size of the brush and the keys "A" and "S" to increase and decrease the hardness of the brush. What happens is that when I hold Alt to pick a color or to zoom, it calls the menu bar's shortcuts (it underlines the menu shortcuts) , so If I do so and press "S" it calls the Select menu, which is not what I'm trying to do.
In Gimp, the pick a color and zoom in and zoom out actions are configured to work with the Ctrl key instead of Alt, so the shortcut menus are not an issue. Is there anyway to switch it to Ctrl? Is there anyway to make the Alt stop calling the menu bar?
View 1 Replies
View Related
Aug 25, 2013
The issue I'm having is that, while using [URL] (ArtBee's 3D Box PSD), I cannot save the smart layer.
[URL]
Basically, as per the documentation instructions I'm supposed to press "Ctrl +F10" to render the 2 smart layers onto the projected box. Problem is, when I do it, nothing happens.
I've done it on CS6 with no problems, it's only after switching to CC that I cannot save.
View 3 Replies
View Related
