I'm running a batch process to apply a certain action. This action selects a color in the image, then switches to the alpha channel, selects a new background color, then deletes the content selected, leaving the area with a new rgb value. The problem is that not all the images have that color, so when it goes to select it, it doesn't find it.
Then an error pops up informing me that the delete funciton isn't available, since there's nothing selected. I've tried logging them to a file, but even then, the action stops at that step and moves onto the next image. Therefore it never makes it to the close step, so they remain open.
I wrote some code in VB .NET 2010 getting started from Kean Walmsley project to create a new layer. I did it working directly from code and not using a command line as he did.
[URL] ...
The problem is that the same code works if I call it directly inside the application code, but doesn't if I throw it from a push button.
I have Photoshop 7 installed ands till recently it was running fine but from just day before yesterday I cannot use the filters. Whenever I try to use it it says "Cannot complete action due to error in Module Interface", I have also tried by reinstalling photshop but it doesnot work.
when i load actions it said that "Could not load the action because of a program error" and some filters when i used it said "could not complete your request because of a program error? could anyone encouter this conditon?
I'm recieving this wierd, almost pixelated burn in my brush whenever I push down my pen onto my Intuos4 tablet. It's happening with ALL of my brushes regardless of presets or whatever kind of textures or effects I have on them. This image is from a fresh document, there are no filters or any other effects running. Just a colored brush producing these weird pixels.
I'm running Adobe Photoshop CS6 on Windows 7 - Intel Core i7-3770K CPU @ 3.50GHz 3.90Ghz - 8Gb RAM - AMD Radeon HD 7700 Series.
I try to use the lasso tool to select an irregular chunk of an image and copy this chunk to another part of an image.
When I do this, it says "Could not complete the copy command because the selected area is empty." But there is clearly something in the selected area, and even if there wasn't, it should still copy white space.
This worked once, but when I try to do it now, I have the above problem. I don't know what I did different the time that it worked.
I'd use Microsoft Paint to do this, but it only lets me copy and paste square chunks and I need irregular.
Suddenly today, trying to open CS3 I get blank registration window which it will not go beyond.
The application is there in the background but everything is greyed out. I am not sure I have ever filld inal the registration details, I have just always pressed the 'later' button.
My Photoshop Elements 9.0.3 will not crop photos as it did in the past. When I use the crop tool, the photo is changed to the size of a dot and is unrecognizable.
I am creating PDF files through the publish button on AutoCAD LT 2014 and I have had a client ask me of the PDF files are PDF/A compliant. I have search and found nothing on the subject.
The four squares all have a 0px top and bottom Push Margin set, which I would have thought would have meant I could have butted them up directly next to each other (but not overlapping).
However you can get them very close but not touching.
I just downloaded PS CS6 and LR 4 to both my desktop and laptop. From LR, I use control + E to push the raw image over the PS CS6 and it works on my laptop but *not* on my desktop. I have LR 4.1 and also camera raw 7.1 on both my laptop and desktop so I'm updated.
For some reason on my laptop I'm able to successfully use control + E to push the raw image to CS6 and it opens sucessfully but *not* on my desktop. When I do this on my desktop it just opens PS CS6 but that's it. The raw image never appears.
I've made sure that the LR 4 preferences setttings are the same on both my laptop and desktop. I've even rebooted.
I often work with very large images (300dpi, with both geographical space and file size very large) since I'm often printing these images for print / direct marketing campaigns or signage. The image I'm working on now, for example, is 255MB / 44" x 42" @ 300 DPI. That's a big picture! So, sometimes I need to work in detail at the edge of a document. That's where the problem comes in:
When I'm zoomed in at say 100%, while working with that 44" by 42" image, obviously I must scroll around to get access to other areas of the image and display them on the screen. However, if I try to use the Hand tool for instance and drag up so I bring the canvas up and expose some part of the gray outside (and thus exposing the edge plus some blank space for me to work on, just like you'd do in Flash or whatever other programs.) When I try to do that with PhotoShop CS2, it will bring the image to the edge of the image's window, but not allow me to drag it even further like you'd be able to do at say a zoom level of 50% or smaller.
Can I enable this feature so I can drag images and move them into the window display but also show some of the exterior of the canvas so that I can work in great zoomed detail but at the leading edge in 100% zoom mode?
Reinstalled PSE 5.0 on new computer running Windows 7. Downloaded the service pack for PSE 5.0.2. Read that I needed to adjust the compatibility to Windows XP (service pack 3) PSE opens, but only as far as "Reading Preferences," then never goes farther.
Using the axis transition how would I go about creating a push, it sounds so simple but I've been screwing around for a little bit and haven't done it.
I've done a "slide in" on my incoming clip but thats just half of it. Also, I saw somewhere that you can reveal the axis nodes on a timeline axis effect, but I'll be damned it I cant remember how.
i have problem with my cad. When i push in scroll button in old settings i saw hand (pan function) and it was easy to move. Now when i push in scroll button i see cross with arrows and moving where i want is difficult. How can i change it (i want use pan function when i push in scroll).
I'm not sure why, but Photoshop just started doing this after I converted my files to a smart object. When I try to zoom in past 50%, it displays these transparent pixel squares over the entire image. I tried rasterizing and flatting the image back, but that didn't do anything. It seems to keep doing this.
I have been using PSE 8 for a while, and recently installed the version 11 trial copy to see if it made sense for me to upgrade. Everything seemed to be going OK (PSE 11 converted my PSE 8 catalog OK etc.) until tonight.
A few minutes ago, I tried to open up version 11 and it gave me an error (#6) that said there was a configuration error and I needed to uninstall and reinstall version 11.
So, I uninstalled version 11. That seemed to go fine.
However, before trying to re-install version 11 I decided to play around with version 8 for a while. Only now, every time I double-click on my PSE version 8 shortcuts (one for the main program, one for the organizer), I get a screen asking me to agree to the Adobe software license. I click "accept" but then the license screen just goes away and the program never starts.
I have just recently upgraded to 2013.I have one color in particular that use dto be grey - now it is red. I have repaired the appearance so it looks correct in a part. I was able to save this backto the library, overwriting the original. This is all good. I am unable to find out how to push this updated appearance to all parts in an assembly. I used to be able to do this with the update styles tool.
if there is a simple way of pushing multiple Polylines to meet a final line that I draw.For instance if there is a zigzagged line, and I drew a line through the middle of it (in a similar direction).
Is there a command or script that would push all of the points on the zig-zag to meet with the straight line I drew?
I know you can "pull" styles from a drawing (maybe the template) into your current drawing.
Is there a way to "push" them from the current drawing to another on?
Here is what I am picturing:
Right click on a style on the settings tab and choose "Send to Template"
"Template" would either be a predefined DWT file or it would open a standard file selection dialog to select one.....and this would copy the selected style into the template.
Just converted from 14LT to 2014LT. In 14LT, when drawing a shape, say 4' by 5', I used to be able to draw the first two lines, 4' and 5' and then simply push the up arrow to retrieve the last two entries at the command line. When I do that now, it gives me some sort of dimensional coordinates.
Also, same subject, different useage, when drawing from points to points, I used to be able to draw a line from a point to a snap point such as intersection and then simply push the up arrow to retrieve that command to the command line over and over depending on a snap by snap basis. Again, it just gives me the dimensional coordinates.
I need to design a 'stencil' of sorts - but it just needs to be an array of circles separated by a constant distance. its an array of 200 micron diameter circles separated by a distance of 500 microns each (between centers). Its super easy to make this array, but when I try to 'pull' it into the third dimension, or extrude the array, I get an 'invalid' error. Or the highlighted objects just get 'unhighlighted' (for the lack of a better word) once i hit enter after selecting them all. Also, I made the entire array into a 'block' of easiness.
After editing my clips and am ready to burn,I select SHARE, CREATE DISK, DVD, create a menu and get stuck in a closed loop.Instead of NEXT after I preview the final product, the window has BACK, so I end up in the window where you select if you want a menu. Click NEXT and am back at the menu window with BACK in the box.
This same VS pro X2 was on my old computer (XP) and made many burns with no problems.
I've had nothing but problems with this latest project, finally got what looks decent and can't get past "preview" in the burn module. There's no "next" button, just "back."
Here's the details. Operating system: Windows 7 Home Premium VideoStudio Pro x2 - downloaded the patch
Project Properties: NTSC 6.73 KB 37:31 minutes long Still images are jpeg videos are both MJPEG and Microsoft AVI (camcorder AND still digital)
Edit file format MPEG - should I try AVI? Microsoft AVI files 24 bits, 704 x 480 frame-based 4:3 MJPEG Compressor - should this be something different? PCM, 48,000 kHz 16 bit stereo
Image: Keep aspect ratio checked apply anti-flickering checked
