Photoshop :: Black Burn In Brushes When Push Down On Tablet
Jul 12, 2013
I'm recieving this wierd, almost pixelated burn in my brush whenever I push down my pen onto my Intuos4 tablet. It's happening with ALL of my brushes regardless of presets or whatever kind of textures or effects I have on them. This image is from a fresh document, there are no filters or any other effects running. Just a colored brush producing these weird pixels.
I'm running Adobe Photoshop CS6 on Windows 7 - Intel Core i7-3770K CPU @ 3.50GHz 3.90Ghz - 8Gb RAM - AMD Radeon HD 7700 Series.
View 2 Replies
ADVERTISEMENT
Jan 28, 2014
Recently I have been noticing that while I am drawing on gimp using my tablet at times the brushes start to freak out and just keep rotating constantly.
I cant make a straight line using a rectangle shaped brush. And this happens to all the brushes. It just makes everything look really messy.
View 1 Replies
View Related
Mar 7, 2013
When I use the paint brush tool with my mouse, color set to black, it works fine. But when I use the tablet pen, it draws this fuzzy pinkish black color. What's the problem and how do I fix it?
View 2 Replies
View Related
May 26, 2006
My photoshop brushes only work on a black background. And they only work as white. I figured it was just the one group, but it isn't. It's ALL of them. Did I do something wrong? Or what's up with it? When I downloaded them, they showed the preview of the brushes in several colors. Yet mine won't work. Why is that? (btw, i'm using photoshop CS1)
View 1 Replies
View Related
Nov 14, 2012
One of the features I use most is the brushes. However, when I installed Gimp (2.8) on my new laptop, my favorite brushes no longer work properly:
* they're jagged, pixelated, or the finer lines are interrupted - instead of looking smooth
* I can't change the color of them; they just show up black
I made a comparison of screenshots so you can see. Same brush, same size (even though one version says "scale" and the other "size," I made them both go up to the 100 pixel mark, and you can see that the brush's natural size is larger than that), same canvas size.
On my old laptop, I had Gimp 2.4.1 and the OS was Windows Vista, 32-bit. Here the brushes looked right: [URL]
On my new laptop, I have Gimp 2.8 and the OS is Windows 7, 64-bit. Here, I can't use the color from the gradient, and the brush doesn't look smooth (and the finer lines are interrupted): [URL]
View 11 Replies
View Related
Oct 2, 2013
Art brushes are showing a grey version of what should be a Rich Black RGB 0, 0, 0,. Furthermore, expanding the art brush stroke and sampling the color shows the strokes "Black" is actually: 32,32,32, pre-expansion the RGB sample shows the stroke is 0,0,0.
Color Mode=RGB
Print Proof=NO
Document =RGB
Display all Blacks, print all Blacks=Rich Black
Options for Art Brush show art brush swatch is Rich Black but using eyedropper (within brush options window) and sampling preview stroke CHANGES swatch preview from Rich Black to Grey.
View 10 Replies
View Related
Apr 15, 2013
I'm having an ongoing issue with Lightroom 4.4 when using adjustment brushes in the development module with RAW files from a Canon 5d Mark III Raw on a retina MacBook Pro running OS 10.8.3 When using the adjustment brush to make exposure adjustments, the adjusted area gets covered with tiny black speckles. I see it when trying to darken down highlights or when trying to lighten shadow areas. The heavier the adjustment, the worse the speckles get. I have taken the same original images and opened them in Photoshop and made similar local adjustments with curves and the images look fine, so it's definitely an error with Lightroom inserting the artifacts.
View 2 Replies
View Related
Aug 28, 2006
could somebosdy please explain the diff. between linear dodge/color dodge and the linear burn/color burn settings of the brush tool?
View 1 Replies
View Related
Dec 6, 2005
I am willing to do a text that is pushed-in in the sand as a foot mark.
How to do it or what effect or transfer mode to use ?
View 2 Replies
View Related
Nov 1, 2012
I'm running a batch process to apply a certain action. This action selects a color in the image, then switches to the alpha channel, selects a new background color, then deletes the content selected, leaving the area with a new rgb value. The problem is that not all the images have that color, so when it goes to select it, it doesn't find it.
Then an error pops up informing me that the delete funciton isn't available, since there's nothing selected. I've tried logging them to a file, but even then, the action stops at that step and moves onto the next image. Therefore it never makes it to the close step, so they remain open.
View 1 Replies
View Related
Jan 30, 2006
I am interested in grouping and sorting brushes according to size, shape, whatever.
Right now when I add a brush library, they just stack on top of one another.
For example let's say I have a round brush with a 10 diameter, then next to it a round brush with a 20 diameter. If I make a 15, it goes to the bottom of the list, and I have to scroll all around. How can I group them?
I suspect I would have to make my own brush library with my brushes how I want them, then save that and load it?
View 3 Replies
View Related
Jun 6, 2013
I am creating PDF files through the publish button on AutoCAD LT 2014 and I have had a client ask me of the PDF files are PDF/A compliant. I have search and found nothing on the subject.
View 3 Replies
View Related
Apr 2, 2013
I want to use i Logic to retreave or push the i Property of "Project" from my skeleton file to the rest of the parts and assemblies in the project.
View 9 Replies
View Related
Oct 10, 2013
The four squares all have a 0px top and bottom Push Margin set, which I would have thought would have meant I could have butted them up directly next to each other (but not overlapping).
However you can get them very close but not touching.
View 7 Replies
View Related
Mar 21, 2012
I would like to shell out this volume. Is there any way to push the flat surface down into the volume to accomplish this? See attachment: Volume.jpg
View 1 Replies
View Related
Sep 8, 2012
If I right click on the selection & go to edit copy, I can copy OK.
If I type control "C", the Create Clip window pops up and it wants me to insert the previous copy I did.
This same thing happened to me 4 months ago & I overcame it somehow; but then I reloaded Gimp and I am now back to where I once was.
I want to push control C of a selection and the paste it. But it makes me do it the long way, right click menus.
View 1 Replies
View Related
Jun 24, 2012
I just downloaded PS CS6 and LR 4 to both my desktop and laptop. From LR, I use control + E to push the raw image over the PS CS6 and it works on my laptop but *not* on my desktop. I have LR 4.1 and also camera raw 7.1 on both my laptop and desktop so I'm updated.
For some reason on my laptop I'm able to successfully use control + E to push the raw image to CS6 and it opens sucessfully but *not* on my desktop. When I do this on my desktop it just opens PS CS6 but that's it. The raw image never appears.
I've made sure that the LR 4 preferences setttings are the same on both my laptop and desktop. I've even rebooted.
View 8 Replies
View Related
Feb 15, 2013
Using the axis transition how would I go about creating a push, it sounds so simple but I've been screwing around for a little bit and haven't done it.
I've done a "slide in" on my incoming clip but thats just half of it. Also, I saw somewhere that you can reveal the axis nodes on a timeline axis effect, but I'll be damned it I cant remember how.
View 2 Replies
View Related
Mar 28, 2012
Will AutoCAD convert standard to metric with the push of a button? Do you have to convert them manually? If the answer is yes which versions will?
View 7 Replies
View Related
Jul 23, 2013
i have problem with my cad. When i push in scroll button in old settings i saw hand (pan function) and it was easy to move. Now when i push in scroll button i see cross with arrows and moving where i want is difficult. How can i change it (i want use pan function when i push in scroll).
View 3 Replies
View Related
Apr 17, 2012
I have just recently upgraded to 2013.I have one color in particular that use dto be grey - now it is red. I have repaired the appearance so it looks correct in a part. I was able to save this backto the library, overwriting the original. This is all good. I am unable to find out how to push this updated appearance to all parts in an assembly. I used to be able to do this with the update styles tool.
View 1 Replies
View Related
Aug 19, 2013
if there is a simple way of pushing multiple Polylines to meet a final line that I draw.For instance if there is a zigzagged line, and I drew a line through the middle of it (in a similar direction).
Is there a command or script that would push all of the points on the zig-zag to meet with the straight line I drew?
View 9 Replies
View Related
Jul 27, 2012
I know you can "pull" styles from a drawing (maybe the template) into your current drawing.
Is there a way to "push" them from the current drawing to another on?
Here is what I am picturing:
Right click on a style on the settings tab and choose "Send to Template"
"Template" would either be a predefined DWT file or it would open a standard file selection dialog to select one.....and this would copy the selected style into the template.
View 9 Replies
View Related
Aug 1, 2013
Just converted from 14LT to 2014LT. In 14LT, when drawing a shape, say 4' by 5', I used to be able to draw the first two lines, 4' and 5' and then simply push the up arrow to retrieve the last two entries at the command line. When I do that now, it gives me some sort of dimensional coordinates.
Also, same subject, different useage, when drawing from points to points, I used to be able to draw a line from a point to a snap point such as intersection and then simply push the up arrow to retrieve that command to the command line over and over depending on a snap by snap basis. Again, it just gives me the dimensional coordinates.
View 2 Replies
View Related
May 29, 2012
I need to design a 'stencil' of sorts - but it just needs to be an array of circles separated by a constant distance. its an array of 200 micron diameter circles separated by a distance of 500 microns each (between centers). Its super easy to make this array, but when I try to 'pull' it into the third dimension, or extrude the array, I get an 'invalid' error. Or the highlighted objects just get 'unhighlighted' (for the lack of a better word) once i hit enter after selecting them all. Also, I made the entire array into a 'block' of easiness.
View 7 Replies
View Related
Nov 7, 2011
I wrote some code in VB .NET 2010 getting started from Kean Walmsley project to create a new layer. I did it working directly from code and not using a command line as he did.
[URL] ...
The problem is that the same code works if I call it directly inside the application code, but doesn't if I throw it from a push button.
I get the eLockViolation error code.
View 3 Replies
View Related
Aug 1, 2012
How do you rearrange the brushes in the brushes box?
I've seen they are arranged by name, so how do you rename the brushes since renaming the file name don't rename the brush.
View 2 Replies
View Related
Dec 5, 2011
I am wanting to display previews (pngs) of the ai files in the plugin that match search criteria on a button. As the user scrolls through the results, change the button picture to be the png for that ai file. I tested it with a default image in case the image doesn't exist. The test image is cropped to the size of the button.
The pngs are necessarily 600x600 pix. (For other applications). I want to resize them for display on the button.
(The button is only 100x100).
Do I need to use Image/Drawer suites?
View 2 Replies
View Related
Nov 25, 2012
I scanned a black and white print in color and am trying to replace all the black with dark green. Been trying for hours in elements 9. This is all so hard. Just to ask this question I have typed it into 3 different screens, set screenname, many other hurdles.
View 3 Replies
View Related
Jun 24, 2013
What do I do? Everytime I am working in Photoshop my screen flashes black, and the entire image goes black.
View 2 Replies
View Related
Jun 3, 2013
I can preview a slideshow on Adobe Bridge, wondering how to burn that slideshow to a CD?
View 2 Replies
View Related
