Lr 4.3 seems to reject (video) files it cannot open, in a Catalog.
A Catalog should contain ALL files, pictures, photos, videos alike.
I do not like the concept of rejecting files. This way e.g . old video files are excluded from a catalog.
How am I to catalog the rejected files?
How to restore my backup catalogue to a new location?
View 8 Replies View RelatedI just discovered that my Lightroom 3.6 has lost track of some files. The files exist on the hard drive, but Lighroom doesn't display them. When I try to re-import them, Lightroom reports that they already exist. When I search for them by file name in Lightroom, they aren't found.
View 3 Replies View RelatedI recently lost some original files to a hard drive failure. Is there a way for me to retrieve some printable files from LR catalog files?
View 1 Replies View RelatedKnowing that a retouched photo is stored in a specific folder, how to catalog old files that are not edited? The goal is to have a full match in the catalogs.
View 4 Replies View RelatedCurrently my Catalog and photos reside inside a directory c:/Current (path shortened for simpliicty!) and I want to move the whole lot to a new location on the same drive, c:/NewLoc.
I see many explanations of moving to other drives or machines but cannot find an explanation of a 'simple' move to another directory on the same drive!
Files don't show in catalog. Synchronization shows that the files need to be synched. Whe synchronizing, the files do not import or they show that they are already in the catalog. Yet they do not show in the catalog. How do I fix and not lose my edits.
View 2 Replies View RelatedI turned on my computer this morning and am un-able to access my 3.6 catalog files in 3.6, LR 4.1 rc2 has no porblem.
View 6 Replies View RelatedHow do you add files to the same catalog from different folders?
View 1 Replies View Relatedi moved my original files to a external hard disc. now i can't export files from the catalog. how can i connect the katalog to the original files again?
View 2 Replies View RelatedI have LR installed on my MacPro and the Mac just died (graphics card issues). I'm going to just buy a new Mac, though I'm trying to figure out the best way to access everything in LR until then. All of the images and photos are stored on a separate internal drive that I can take out and access via a docking station.
1. Does the license for LR allow me to install a 2nd copy on my Mac notebook?
2. If I place a copy of the LR catalog file on my Mac notebook and plug the photos/videos drive into a docking station connected to my notebook, will everything open up?
I’m teaching a college class and a couple of my students are shooting RAW. When they complete their assignment in Lightroom, they Export as Catalog, compress that folder and submit it to me through Dropbox. This worflow works great with students who shoot .jpg but the kids who are shooting RAW have files that are too large to upload.
View 2 Replies View RelatedI just mistakenly deleted all my 5000 dng files, and some xmp files are in the trash too. How do I get them back in the catalog? My last backup says it was after I had deleted them (apparently I set it to auto backup?) My only excuse is that I was in an accident 2 days ago. Maybe shouldn't be doing much in Lightroom~!
View 3 Replies View RelatedI am using Lightroom 2. I have many photo folders on an external drive that show as off-line when I open Lightroom. I can see the photos in Lightroom but can not do anything with them.
How do I reconnect this folders that show off-line and have a ? mark?
Is there an easy way to show all files in a catalog not currently assigned to ANY (non-smart) collection?
Can i set up a Smart Collection to do this?
I'm using 3.6. Can I delete LR2 cat, data and journal files?
View 4 Replies View RelatedImages on my laptop from 2 photoshoots in the studio today were EXPORTED from laptop as catlog and imported to desktop as catalog.
I imported without moving the files anywhere since I was instructed to move that folder to its final resting place.
The 125 images were importred into LR4 but I see they are still CR2 files.
Is there a way to convert these to DNG inplace? or is it safe to re-import these. I don't want the side car gig.
How can I EXCLUDE particular folders/files from being included in the Lightroom 5 catalog?
I want to be able to specify paths and/or filename patterns that should NEVER be indexed in the catalog: not that they don't show up under certain circumstances, just that they are NOT THERE (in the catalog) to begin with!!
I also do NOT want to have to respecify these criteria when "synching" the catalog; criteria should be PERMANENT (or at least 'til they're changed in LR preferences).
My catalog was corrupted, and i decided to create a new catalog from cratch.To my big surprise alle falenames was renamed from IMG_xxxx.cr2 to IMG_xxxx-2.cr2. This is i problem sice i still god the old catalog, and try to recover some of the old editorial settings, but since alle files are renamed the are no longer visible in the old catalog. just about 15.000 files are renamed!
View 4 Replies View RelatedI want to move my Lightroom 4 catalog to my new iMac and keep the RAW files on a separate server, what is the best way to do this
View 11 Replies View RelatedHave new computer 64 bit with dual drives (C: 111GB, E:1.36 TB) . C. drive operates Win 7. Do I install CS 6 and LR4.1 program on E drive along with catalog including phtos? or put CS^ and LR on C: and catalog and pictures on E:
View 2 Replies View RelatedI am running LR v3.4.1. I have had a single catalog for a long time and it has really effected performance, so I am wanting to move some files out into a separate catalog. Currently, my catalog is on my C: drive, but all of my pictures are on my K: drive, which is external. When I do the export as catalog, it creates the new catalog on my C: drive, but also creates a copy of all of the photos there as well. I want to point the catalog back to the original files on my K: drive so I can remove the ones created during the export process on my C: drive.
View 1 Replies View RelatedIf I do an import from my memory card, choose my external hard drive as a second location for the import, and then go into my catalog and delete the bad photos, is there any quick way to also remove those files from the backup on the external hard drive? I've got a ton of wasted space on my external HD due to things that I've deleted and don't know of any simple way to get rid of them short of formatting the drive and doing another export, which takes a long time and isn't something I want to do all that often.
View 3 Replies View RelatedI had a decently organized folder structure with all photos from about 2005 on being organized by year (moved to their corresponding year folder on import from memory card).
However i had about 10,000 or so photos which were placed randomly in folders and sub folders from various backup/restores etc, which were imported into lightroom but not moved into their corresponding year folders.
I just purchased LR5 and i wanted to finally take the time to organize my file folder structure and create a new catalog. Following a method i researched found here: [URL]....
Here is what i did:
1) In Lightroom 4 i highlighted All Photos and saved metadata to file for every photo. (thinking this would keep all original metadata and any adjustments i made on the files)
2) Fired up lightroom 5 and started a new catalog. I then proceeded to import folders from my photo file folder and use the Import and Move option which imported and moved the files into the folders by year.
3) This seemed to work well but it seems i wound up with lots of duplicates (the older photos i had often had filename1.jpg and filename1-2.jpg which were often a cropped dupe) which was not a big deal and still ok so far.
4) I really liked the ability to click on the Year folder in the library and see all the photos for that year but i noticed that TONS of photos were missing within each year.
It turns out that a TON of photos which were in one of their own folders (not by year) folder were moved to 2013 folder and the original capture date had been re-written as 7-24-13 (the import date) overwriting what it was originally there and ruining my organization!
My catalog is a mess, all the files have been moved to a year folder and alot of the years are just plain wrong. I don't want to sort through my entire collection (48,000 photos) and find miss-labeled dates and out of place files!
what can i do to restore the original capture date and put my collection back in the proper order?
I don't want to have the original files on both laptop and desktop.
I want to make a copy of a Lightroom 3 catalog to put on my laptop so while on the move I can be geo-tagging and keywording to 8000 photographs. I don't want to drag an external drive with me. I just want to be able to work on the catalog metadata and have all the updates/changes stored there (on the laptop)(in the catalog) and then transfer the catalog back to the desktop (to the primary archive) and have all the updates/changes pushed back into the DNG's or the XMP sidecar files alongside the CR2's. These changes would be only keywording and possibly writing GPS data into them….NOT image edits (that would probally require access to the original image files)
As a test, I tried "exporting as catalog", TWO images (with the source images "unavailable"). I flash-drived the resulting catalog to my laptop. I opened the catalog in LR3 and made changes to the metadata. I tried both "saving metadata to file" and "updating DNG previews" (which would be useless anyway since I could not write data back to the missing originals) and also tried doing nothing and just closing LR, then pulling the flashdrive and plugging it into the DESKTOP.(knowing the changes are stored within the catalog itself only) I open the 2 picture catalog in LR and see the keyword updates. Hurrah!
I switch over to the master catalog. All I want to do is import the updated metadata (keywording, contrast, etc…) back into the master catalog and push the data into the original DNG or XMP. On import I select "replace: Metadata and develop settings only" (with or without "preserve old settings" checked) and click import. Voila! NOTHING HAPPENS and the updated keywords are NOT picked up.
I know that the metadata updates were carried out because they showed up when I opened it separately in LR! For some reason they don't seem to making through the import process to the master catalog…
I will be managing a small portion of a client's overall image workflow by updating their web prescence on a regular basis with new work and retagging/uploading old work. I believe this requires the catalog and the image library to be housed on an external hard drive that can travel between the two of us. We are both working on PC's with LR 5.3.
The workflow would look something like this:
Client downloads new images onto external hard drive and imports into LR "ClientCatalog" is created Flags Picks and Creates a Collection from those Picks.Hard drive is handed off to me where I open "ClientCatalog".Make suggested edits to images add detailed tags and metadata upload to various social media sites and websites return hard drive to client
Is there potential problem with this workflow? My assumption is that if everything is housed on the external hard drive then there are no worries about the catalog containing all the latest updates. Are there any "safety protocols" you would add in to this workflow (besides mirroring everythign on another hard drive)?
When cutting video shots in sync with a music track how can I remove part of a clip and replace with a new shot. I know there is a replace clip facility but there appears to be no way of editing the new clip. What I would like to do is leave blanks in sync with the music and fill in correct length of shot later. The same question for overlaying video shots of an interview and holding sync when returning to interviewee.
View 4 Replies View RelatedIn VideoStudio 6, how does one connect the voice track to the video during the editing process?
My specific issue is that I have to go back and edit material sometimes that precedes the voice track I already have laid down, but when the time frame of the material after my new edit I have to go back and drag the voice track to the proper location. I would like to be able to permanently "attach" the voice track to the specific video clip and have it follow that clip as it is moved, time wise, during the editing process.
Is there a means to make this happen?
PS - I realize there is a work around way - just publish each clip and then rebuild the final project but that is NOT what I want to do.
I'm using Lightroom 1. I tried to merge catalogs by importing a catalog into a master catalog, but there were some problems. The one I noticed immediately was that the collections are not correct. It imported the collections, but for example one collection now has only 4 photos when the originbal had 140? How can I fix that? (Although not necessariy a problem, it seems to have the wrong number of photos imported too. It says the previous import was 3175 photos when it was more like 10,000.)
View 2 Replies View RelatedI had to reinstall an OS in my computer due to a virus. As a result LR 3 in no longer installed. I still have the catalog on a backup disk and have just installed and updated to LR 4.4. What is the best way to merge the V3 catalog with V4 and are there any things I should expect or look out for?
View 2 Replies View RelatedI see that you can split the audio from the video. Can you do the reverse and link the audio back into the video say after you split, cut and mute an off camera scream? It would just make it easier to add clips before the edited one, although it's not all that hard to sync things up.
View 2 Replies View Related
