Lightroom :: 5 - File Structure Change?
Jul 9, 2013
When I imported images in Lr4, into pictures with a file name of say "images" - that's what happened. With Lr5, when I import images into pictures with a file name of "images", I get a file structure of "pictures->images->2013->2013,month,date".
I don't want the "2013=>2013,month,date" included in the file structure but I can't figure out how to exclude it. I didn't make any chages when I upgraded and I can't find anything in preferences to change the "default" file stucture.
View 3 Replies
ADVERTISEMENT
Jan 2, 2012
I just merged two catalogs from my work laptop and my home desktop.
One has this folder structure:
YY/MM/DD
One has this:
YY/YY-MM-DD
I'd like to get them together into one unified YY/MM/DD set of folders, preserving labels and collections from both catalogs.
If I delete images out of the catalog and re-import (to get LR to automagically move/create folders) I lose labels and collections.
If I export as catalog then import as catalog (to keep labels) the folder structure doesn't change.
Creating folders manually in the finder or Lightroom would take foooorever. Is there a way to get Lightroom to move everything into the structure I want, keeping labels, etc?
View 3 Replies
View Related
Mar 1, 2014
I just recently upgraded lightroom at the same time that I switched harddrives. Basically, I installed LR 5 on the new harddrive. Then I opened my LR4 catalogue on LR5 and had it do the "update" to the catalogue. Everything seemed to be working properly. However, this is the first time I have imported a memory card and it is really having problems.
I imported and had the files put into Pictures>Client Sessions>Weddings (and then wrote in the subfolder name). It shows in my finder that that is where the photos are. However, in Lightroom it is like creating a whole new section. For some reason it isn't "linking" to my current file structure. See the 2014 Mclennan-Reeser file. It is under "wedding" on my finder.
See how it is is like its own separate thing on my Lightroom (even though if you scroll down you will SEE the wedding folder. I have even tried to drag and drop it into "wedding" on LR... but it says it already exists OF COURSE IT DOES! I then tried to right click on 2014 McLennan and say "show parent folder", but it just creates a NEW "Wedding" folder in LR.
View 4 Replies
View Related
Jan 1, 2013
I need rearrange my file structure to make it better, and so i easler can work with it. The reason that I prefre to do it with Lightroom, is that I mostly have raw files, and the file manager i windows7 do not read those.
View 2 Replies
View Related
Mar 30, 2012
This happened in LR3.7 and continued when catalog was imported into LR4.I import by date in these folders: year/month/date..So imports today would go into the 2012 folder - March subfolder - March 30 subfolder
But recently this happens: At the import screen, the correct sub-folder (March 30) is chosen on the right side with the correct number of images. But when the import is executed and I look at my folder structure on the left side in Library mode, the March 30 subfolder has appeared twice--once where it should be as as a subfolder to March, and once above March, and sometimes above all of 2012. The March 30 subfolder of March is listed as empty. The folder in the wrong place has the images. If I try to move the images to the proper folder, it says the images are already there! If I look at the system finder, indeed the image files are where they are supposed to be, and the phantom folder does not exist.
View 1 Replies
View Related
Feb 25, 2012
I have an extensive (seventy year...guess that reveals my age!) of photos. it is convenient for me to have the Lightroom catalogue mirror the file structure in windows "My Pictures".. as I am in the process of scanning old photos and adding to the database, it is often convenient to make minor structural mods to the file structure. what is the simplest way to keep the Lightroom catalogue identical to the now modified database. I have figured out that any photos to be moved in My Pictures, can be deleted first from the Lightroom Catalogue, then moved in My Pictures, then reimported into the Catalogue.
View 2 Replies
View Related
Jan 8, 2014
I'm using rules to control a part that I made. This part is available in steel and wood.
But steel = normal and wood is something we have to buy.
I would like to adjust my rule so that my material choice will effect the "Default BOM Structure"
I just can't find the right "code" to start with.
View 8 Replies
View Related
Nov 23, 2013
I am looking for a solution to change the color off a rendered structure. Its now white, but want to know if it is possible with GIMP to change it into an other color without loosing the shadow effects.
View 6 Replies
View Related
Dec 5, 2011
What are the steps to change face shape or body structure in Photoshop CS5?
View 7 Replies
View Related
Mar 18, 2013
I created a couple of Unistrut structural member and published them to the CC.
Once they were in the CC I setup the proper code allowing these members when placed in an assembly to show up as shown in the parts list.
Now sometimes when the member is an odd length it will show up with the decimal places in the part number (i.e. P1001--46.621) This is fine when it comes to the part number showing up as a decimal. In the description we are now wanting to show this in fractional form such that 46.621 in the part number shows up as 46-5/8 in the description.
When I edit the family table for these members, specifically the columns that house this coding, I am not seeing anywhere on how to change this. Does this can be done and if so what the coding is to accomplish this? Without changing the global units of the drawing?
Inventor Suite 2012
Windows 7
View 5 Replies
View Related
Dec 9, 2013
I have a problem with my revit 2013, I have to change one of my walls structure, but as soon as i hit ok the message "Pads can't overlap (but can share edges)" pops up, I cant understand where the problem comes from because I am not changing pads boundary!
View 2 Replies
View Related
Aug 22, 2013
I assume nobody has been able to create a parametric part used for storm pipe networks that can have the pipes attached to a point within the structure other than the insertion, or have the elevation read from a point other than the insertion.
With that in mind, we are trying to develop a tool that would allow us to pick a strucutre, and set its "rim" elevation to a point on a proposed surface that is not at the insertion of the strucure. I am decent with lisp, but have not attempted to gather info from random points on civil ojects.
View 9 Replies
View Related
Jun 25, 2013
The BOM structure of the library parts is set up as "purchased" and I cannot change it for some reason..... is there any way to change this?
View 4 Replies
View Related
Mar 22, 2013
In a IPartFactory is it possible to change the BOM Default structure per IPartMember?
View 5 Replies
View Related
Nov 22, 2011
I have a wall of frames, if you will, and some frames within this wall are different sizes. When doing the BOM, I want to be able to combine anything that has the same stock number as well as the same cut length. The only way I have thought to do this so far is to cycle through each stock number and if the cut length is the same, I override the quantity of one and change the BOM Structure of the other to "Reference".
How can I change the BOM Structure to reference without selecting the part or going through the BOM Editor? Is there some VBA code I could utilize? I am striking out by solely using iLogic.
View 2 Replies
View Related
Sep 25, 2012
I would like to build an expression that I can use in a label at a structure in a profile view to show the horizontal angle change on the alignment at the structure.
Of course, in the available structure expressions, we do not have the alignment delta angle at that point even though I have a referenced alignment in my pipe network.
Our subdivision code has minimum drop across manhole for different ranges of horizontal angle change.
I want to create a label that shows the minimum drop required at a manhole off it's referenced alignment and I would like to see it on the profile view, because that is where the drop value is relevant.
View 2 Replies
View Related
May 21, 2012
I have about 100 manhole structures with a 0.5' sump. I want them all to 0.0'. Is there a way to change the sump on more than one structure at a time?
The only way I have found to change the sump depth is one at a time through the structure properties.
Civil 3D 2012 SP3 | Win 7 64-bit SP1
Xeon E5-1620 @ 3.60GHz, 16GB Ram | NVidia Quadro 600
View 2 Replies
View Related
Nov 4, 2011
We use C3D 2012 (metric only) - We are attempting to customize our list of structures for Sanitary Sewers. The structure list shows sizes we do not use and we would like to modify them. However, when we try to select the "Inner Diameter" it displays a list of sizes that we can not seem to modify or add to.
I have looked at some of the XML files to try and modify or add new sizes (example: AeccStructConcentricCylinder_Metric.xml) , but they do not seem to be recognized even after I restart the program.
Here is what the file looks like:
<ColumnConstList desc="Inner Structure Diameter" dataType="float" unit="mm" name="SID" id="CCL1" visible="1" context="StructInnerDiameter" index="0">
<Item id="i0">1200.0000</Item>
<Item id="i1">1350.0000</Item>
<Item id="i2">1500.0000</Item>
<Item id="i3">1800.0000</Item>
<Item id="i4">2050.0000</Item>
<Item id="i5">2300.0000</Item>
<Item id="i6">2550.0000</Item>
I tried modifying the last line replacing 2550 with 3600.
I also tried adding a line <Item id="i7">3600.0000</Item>
I saved the XML file and restarted the program with nothing changing that I can see.
Looking for correct file(s) to edit so I can modify the LISTS that come up in the piping modules.
View 2 Replies
View Related
Feb 12, 2008
One good thing about null structures is the way they display in 3D. They cover that gap in the pipe segments. Can I steal that shape?
I am currently using a simple cylinder for water pipe "joints" and turning it off like most people do I think.
View 4 Replies
View Related
Apr 30, 2012
I have drawn a pipe network with multiple concentric sturctures. I need to make them all eccentric now. Is there an easy quick way to do this, or do I have to redraw all of them. When I go to the properties, I cannot find an option that allows me to change this.
View 2 Replies
View Related
Mar 14, 2013
As a new Inventor user I wanted to get some insight and pointers on good practices for Project Files and their structure while using a stand alone Inventor seat with no Vault I am a single user at our company and just upgraded to Inventor. I have been using Solid Works for years and things are a little different.
View 9 Replies
View Related
Mar 13, 2012
By the UI, you can import the BOM structure via an XML file. Is it possible by API ?
View 6 Replies
View Related
Aug 23, 2012
get the description of ASL-file. I would like to know it's structure: file-header, data-types...ASL-files are for layer styling. You can add bevel, shadow, glow, stroke, etc. to the layer and save the settings as a style preset, which then can be stored on a hard-drive as a ASL-file.
View 1 Replies
View Related
Sep 23, 2012
Is it possible to retrieve the layers structure in a plain text file or in a CSV or in a TSV file from an XCF project ?
View 1 Replies
View Related
Jan 16, 2013
I have organized my photos in elements organizer 10, using keyword tags and sub categories on my desktop. It works great, if I want to see all pictures associated with a particular keyword tag, I select it and all photos assoicated with that tag appear.
the problem is this, I want the same scenario to work on my laptop. I realize I can rebuild the structure on my laptop, but why take the considerable time to rebuild, if there is a file that contains the structure info and move it to my laptop.
View 2 Replies
View Related
Sep 9, 2013
I have a Nikon D800 (software up to date) and bought Lr 5 yesterday (software up to date). Watcehd Julieanne Kost TV series on Lr, very informative. I want edit my photographs with Capture NX 2 launching it from within Lr 5. Julieanne explained how to launch Photoshop and I have changed the settings in the dropdown menu for 'photo' to Cature Nx 2 and browsed to find it on my program list. It is now set as the editing program, but does not allow me to chamnge the file type to NEF, which is the filetype I want to use. I bought Lr 5 because the D800 was listed as a compatible camera for Lr 5.
View 4 Replies
View Related
May 3, 2013
How can I change a raw file to a jpeg file? I want to email a file to an online printer and they only accept jpegs.
View 1 Replies
View Related
Aug 3, 2012
I've downloaded and installed the 3.6 upgrade at least a dozen times ant Adobe still says I need the upgrade.
I've down loaded and installed the DNG Converter7.1 and my Nikon D7000 .nef files still wont open. I tried to change the .nef file extension to .raw file extensions.
I'm really getting sick of LR3, and I sure's heck am not willing to buy LR4 when Gimp is free!
They load instantly in Gimp.
View 5 Replies
View Related
Dec 6, 2013
I have been using Lightroom 3 for a number of years quite happily. My folders in Lightroom nicely reflected the folder names for their respective photo folders on my external drive. The top level folders were the years (e.g. 2012, 2013, etc) with subfolder names which reflected various photos taken that year e.g. Christmas 2013, Johnny's birthday, etc.
my last photo import my folder structure has changed in Lightroom and instead of showing the folder names it shows the number of photos in the folders. So instead of showing Christmas 2013 the folder name displays as 45 if there are 45 photos in the Christmas 2013 folder. The structure and hierarchy of the folders are still correct but the names have turned into numbers which is nonsensical and makes navigation between folders a headache.
View 1 Replies
View Related
Oct 1, 2013
A bit hard to explain, but after import a good number of photos ended up under the 2011 folder in LR5 instead of in the appropriate YYYY-MM-DD folder that it should be in. This is only in LR. Physically, on the disk, the structure is correct. How does one go about correcting this?
View 6 Replies
View Related
Apr 30, 2013
I'm keeping my photos in a "sort of" date based structure, i.e 2013.04.28_EVENT NAME
Previously I'd just copy the photos from the camera card into the folder on the hard drive and then run a catalog "import in place" to get LR to find the files. I have now upgraded to a Canon 7D and thought I'd try the "Import from card" function after this weekend's shoot. I had too folders to import to, but in each case LR created sub folders under each of these as "2013" and "2013.4.28". I see from other posts that this may be a default folder structure that LR imposes. Is it possible to turn this function off and just import from the card directly into the folder of my choice.
Failing this I'm faced with the prospect of moving all the files back to the "root" sub-folder and then re-cataloging, or going back to my previous method of copy first (in explorer) and then cataloging.
View 3 Replies
View Related
