GIMP :: Retrieve Layers Structure In Plain Text File?
Sep 23, 2012Is it possible to retrieve the layers structure in a plain text file or in a CSV or in a TSV file from an XCF project ?
View 1 Replies
ADVERTISEMENT
GIMP :: How To Make All Blue And Red In Image Of One Plain Shade
Dec 18, 2012Referring to the image attached, this is my question: I want to make all the blue and red in the image of one plain shade. You can see that in the image there are couple of patches of red and blue color separated by while lines. Now inside one of these colored patches (which is isolated form another patch by a combination of above mentioned white lines and the boundary of the image itself), the color is either red or blue. This color does not look uniform because this image is a scan of a painting. Hence, although the entire patch is red/blue, not every pixel in that patch is of the same shade. If I wanted to change everything inside one such region to a plain red or blue color, how can I do that? If such is the case then I will try to articulate it better. Find attached, the image.
View 4 Replies View RelatedGIMP :: Batch Processing - Small Plain Border Around Original Image
Jan 18, 2014I would like to repeat the following procedure on a large number of images but I am unable to find a way of batch processing to do this for me. The idea is to end up with a small plain boarder around the original image. This is to prevent any image being lost when I order prints due to cropping.
1) open image
2) copy the image
3) create a new image 0.5" larger than the original
4) paste the copied image into the larger new image
5) resize the new image to a given size for example 10x8 for printing
6) Save the image under new name or in a different folder to the original.
GIMP :: Layers Turn Into Text Layers?
Jul 2, 2013my gimp 2.8.6 makes majority normal layers turn into text layers..
Even if i "discard text information" from layer..and then save it as .xcf it doesnt work! Same layers appear as text layers when i open that .xcf Its not a big deal but it really slows me down when im working with layers..
Illustrator :: C2 - Select And Copy Ad To New Page Comes Up As Plain Text Without Images
Jun 7, 2012All of a sudden, when I select and copy an old ad to a new page to update it, it copies without images and as plain text, all of the font selections are gone.
View 3 Replies View RelatedPhotoshop :: Retrieve Layers In CS4
May 22, 2009I created two adjustment layers in a PSD image and saved the image without
flattening.
Now I have reopened the image and would like to modify the adjustments.
I do not see the layers.
How are the existing adjustment layers to be accessed in the open image?
GIMP :: Change Text Size In All Text Layers?
Oct 4, 2011I am creating a layered marine chart with reference points. I've imported the chart and am creating text layers with a reference number in them.
I have about 700 of these to add - a daunting task - but it's for a NZ coastguard unit, so is worthwhile.
The idea is to have a layer with all our reference points on it, so when a chart is updated, we can just import the chart; add back the reference points layers and print it out.
(Why? NZ baynames, danger spots etc usually have 2 names; an english name and a maori name - sometimes we have to cross reference when on the water to find the correct place).
Is creating text layers the best way of doing this?
Is there any way of increasing the size of all the text - instead of having to edit 700 text layers?
AutoCAD Civil 3D :: Plain Text Changes Location From XRef Base To Pp Model And Paper Space
Aug 2, 2013I have text in a base dwg next to a c3d s.s. structure table. Looks fine in base dwg. In the plan/profile this is x-ref in the text is on top of c3d table text. visretain is 1, text is not annotative.
View 2 Replies View RelatedGIMP :: Uploading Plain Images - Removing Backgrounds From Images
Mar 27, 2011But I wouldn't be able to upload a hundred tiny, plain images. I made this to add onto the background removal FAQ. I hope it's accepted.
[URL].......
(Image is clickable.)
AutoCAD Inventor :: Possible To Retrieve Information Of Reference In Iam File Without Open File In Session
Oct 30, 2012is possible to retrieve the information of the reference in the iam file without open the file in session ? Opening with notepad the iam file, at the end of file, the references is contains in the planar text.
Is possible to retrieve documentation for this request ?
GIMP :: Rotating Text As Individual Layers
Mar 24, 2012I followed the tutorial linked below to successfully create cartoon text.
My Macbook was then updated to Lion and I checked I had the latest version of GIMP and have been trying all morning to create some more text in the same manner.
However no matter what I do when I select the layer that contains the single letter and I try to rotate it nothing happens?
If I do Alpha to Selection the selection rotates but then I cant do anything with it, stoke fill etc?
To clarify this is what I do:
Create a word
select a letter in the word
ctrl-x
ctrl-v
select new layer
name the new layer to match the letter just cut and pasted
ensure that layer is selected
choose rotate tool
....no rotation takes place?
[URL] ..........
GIMP :: Uneditable Layers In XCF File
Nov 9, 2013Gimp 2.8
Ubuntu 12.04 (Xfce 4.10 desktop)
I have a file in layers that I saved in xcf so that I could later edit the layers. However, when I re-opened the file I discovered I could not edit some of those layers.
Previously I saved-as the file under another name so I could export it as a flattened bitmap. It is those layers that I cannot edit in the original xcf file.
They show up in the layers box and I can highlight them, even turn off visibility. But I cannot select them on the file and edit them. I've tried raising the layers to the top of the layer stack, but that makes no difference.
GIMP :: Moving Layers In PSD File?
Oct 9, 2013I'm trying to move text in a PSD file that I opened in Gimp. I've recorded a Screencast video here, (removed link because image is not quite ready to be shared with the outside world;-) which shows what I'm trying to do.
Basically, I have a line of text which is several layers deep that says "IS THE NORM". I need to move the word "the" over to the left a little because it's a little too close to the word "norm".
However, when I select it and Cut, nothing happens. I tried locking the layer, even though I don't really know what that means - just saw it on YouTube and figured I'd try it - but no luck.
GIMP :: Finding Layers After File Has Been Closed?
Nov 18, 2012Is there a way to get back all of your layers once you save a file andclose out of it? I am new and am creating magazince covers - All I need todo is change the pic - but did not want to have to re-create the entirecover if I did not need too...
View 15 Replies View RelatedGIMP :: Export GIF File With Delay Specified In Name Of Layers
Oct 25, 2013I am creating a gif animation with GIMP 2.8.6 in Windows 7 64 bits.
I open the png files with the option "Open as layers" and then I edit the name of each layer setting the delay and the mode, for example "layer1(1000 ms)(replace)", "layer2(5000 ms)(replace)", ...
If I go to "Filters->Animation->Reproduce" the animation is OK. But if I export the file to a .gif file, the delay between layers is the specified in the Export options and not the delay which I set in the name of the layers.
How can I export a .gif file with the delay specified in the name of layers?
GIMP :: How To Create Layer Mask For Each Of Three Layers With Text Messages
Mar 28, 2012I am trying to develop an animated GIF to use as a web-ad, I have readthe docs and googled but still having problems :-(
The ad (portrait format) is very simple: a background logo at thebottom of the ad, and three different text messages which rotate. Ithus created a bottom layer with the logo covering the bottom third; asecond layer with nothing but the first text message on the upper2/3rds, another layer with the second text message also in the upper2/3rds and finally a layer with the third text message in the upper2/3rds. While the logo at the bottom should be displayed at all timesthe three different text messages are shown one at a time.
After reading the docs I then expanded each layer with a text messageto be as large as the ad itself. My next step was to try to create alayer mask - for each of the three layers with the text messages, saidlayer mask to cover only the lower 1/3 where it would be transparent.
This is where I ran into problems, no matter what I tried, I could notaccomplish this. There must be something very basic I have yet tounderstand!
Last, in order to create the animated GIF, I exported all four layersusing "replace" in the dialog box. I also experimented with "combine"to no avail. No matter what I tried, I either ended up with an animatedGIF where the logo and the three different text messages over timebecame overlaid, or, an animated GIF where only one thing was shown atone time.
What have I missed?
GIMP :: Creating Basic Logo - Blocks Of Text Appear As Different Layers
Nov 24, 2011So I've created a few different blocks of text, which appear as different layers in the layers dialog box.
The area I've created them in 640x400. The various words placed together is much smaller though. So I want to crop the image to just be their size. However, attempting to select all the text bits fails, as I seem to be confined to whatever layer I last clicked on the layers dialog box. e.g. The word "shop" is selected, and highlighting all words using results in only the word "shop" being active to work with.
How do I unselect a layer, or choose all of them??
AutoCAD Civil 3D :: Pipe Network Structure Label Layers
Jan 8, 2013I have a pipe network created that is shown in multiple drawings. I created labels for the structures showing Rims and Inverts. How to put the Rim info on a different layer than the Invert info? Right now the label has 3 different components...I feel like there has to be a way to put each component on different layers...
View 6 Replies View RelatedGIMP :: Copy Editable Text From A Word File Into The Text Editor
Oct 28, 2013I'm trying to copy editable text from a Word file into the text editor for GIMP. Before I upgraded to 2.8, this was possible, but now it seems not. I'm on 2.8.4 using OSX Mavericks on a Macbook Pro.
I'm a terrible speller and since GIMP doesn't support spell check, this was always my workaround.
GIMP :: Command Line Tools For Extracting Layers From XCF File
Oct 17, 2012I have seen mention of a utility called xcf2png which can extract layers from a XCF file and write them to a PNG, but it seems there is no Windows version.
Any way of doing this under Windows/DOS? I just want to extract a layer by name and write it to a PNG file with the same name as the layer.
Or even better - searches a XCF file for layers that (say) start with an underscore and exports only those layers to separate named PNG files.
GIMP :: Making Piece Of Text Glow - Layers Are No Longer Normal Rectangle
Dec 1, 2012I am trying to make a peice of text glow by going to Filters>Alpha to Logo>Neon, but after I do that The rest of it goes away (including the black backround) and on the right, the layers are no longer the normal rectangle, they are very short and long rectangles.
View 1 Replies View RelatedPhotoshop :: CS6 - Editing File With Many Text Layers
Aug 29, 2012I've got a serious issue since the begining of my Photoshop CS6 installation.It's not happening to all my files but few are enough !
Â
I explain myself : When I open a file with many text layers and when I try to edit one of them the text is instantly remplaced by another random text present in this same file.Then the file seems to be corrupted because when I open it with CS5 it does the same thing.
Â
I can't re-edit those files and I must rewrite all those text layers, this is not possible to handle that in a professional way.I tried to launch the script for texts crashes but nothing works.
Photoshop :: Text Layers Are Not Editable In CS6 File
May 8, 2012I have Photoshop CS5 for Windows (version 12.1 x32), and I'm trying to open a CS6 file that was sent to me. When I do, none of the text layers are editable. Is this expected?
View 7 Replies View RelatedPhotoshop :: File With Lots Of Text Layers...
Aug 14, 2009I have created a photoshop file with around 20 different text layers. The sizing and the location of the layers is essential. When my editor imports the file the text layers lose their properties (sizing and placement). Is there something I should be doing to help solve this problem? Can you use text layers between photoshop and final cut?
View 1 Replies View RelatedPhotoshop :: Clipping Mask Multiple Text Layers Without Merging Text Layers
Dec 29, 2008I am trying to get a white layer with see through writing which reveals the background image underneath. (Almost like I have put a stencil over a photograph). I have discovered this is called a clipping mask.
However, I am having difficulty using a clipping mask over multiple text layers. It seems to only do it to one layer directly beneath. I do not want to merge the text layers as I want to mess about with the design a fair bit.
AutoCAD .NET :: How To Retrieve Status Of Image File
Aug 30, 2012How to retrieve the Status of attached Image file.
View 5 Replies View RelatedAutoCAD .NET :: Retrieve Block And Its Position From DWG File
Jul 1, 2013How can I retrieve a block from DWG file using Objectarx SDK.Lets say I have a cinema hall design with a lot of chairs and I am using a blcok named chair to design it. Now I want to retrive this blocks and their positions. Is it possible?
View 5 Replies View RelatedAutoCAD .NET :: Retrieve Command Names From ARX File
Nov 4, 2012I'm looking for a way of retrieving command names defined in an arx/dbx file, and doing it from an external process (i.e. without loading the file into AutoCAD).Ditto for checking the Acad version the arx was compiled for.
View 9 Replies View RelatedGIMP :: Change Color Off Rendered Structure
Nov 23, 2013I am looking for a solution to change the color off a rendered structure. Its now white, but want to know if it is possible with GIMP to change it into an other color without loosing the shadow effects.
View 6 Replies View RelatedAutoCAD Inventor :: Retrieve Hole Dimensions In Dwg File?
Sep 5, 2013how to retrive circular pattern holes dimesnions from the model. i can get other dimensions but struggling with holes.
View 2 Replies View RelatedAutoCAD 2010 :: How To Retrieve PointCloud PCG File Path
Apr 2, 2012I'm using ObjectARX in .net.
Is there a way to retrieve the pcg file path from a given PointCloud?