GIMP :: How To Create Layer Mask For Each Of Three Layers With Text Messages
Mar 28, 2012
I am trying to develop an animated GIF to use as a web-ad, I have readthe docs and googled but still having problems :-(
The ad (portrait format) is very simple: a background logo at thebottom of the ad, and three different text messages which rotate. Ithus created a bottom layer with the logo covering the bottom third; asecond layer with nothing but the first text message on the upper2/3rds, another layer with the second text message also in the upper2/3rds and finally a layer with the third text message in the upper2/3rds. While the logo at the bottom should be displayed at all timesthe three different text messages are shown one at a time.
After reading the docs I then expanded each layer with a text messageto be as large as the ad itself. My next step was to try to create alayer mask - for each of the three layers with the text messages, saidlayer mask to cover only the lower 1/3 where it would be transparent.
This is where I ran into problems, no matter what I tried, I could notaccomplish this. There must be something very basic I have yet tounderstand!
Last, in order to create the animated GIF, I exported all four layersusing "replace" in the dialog box. I also experimented with "combine"to no avail. No matter what I tried, I either ended up with an animatedGIF where the logo and the three different text messages over timebecame overlaid, or, an animated GIF where only one thing was shown atone time.
What have I missed?
View 3 Replies
ADVERTISEMENT
Aug 4, 2013
I have been using Gimp for awhile (love it!) and have always used layer masks with no problems. But for some reason when I create a layer mask by filling in an area with black it isn't 100% opacity. Everything seems to show 100% opacity, but I can see the layers underneath (the mask is maybe at 90%??). If I "show layer mask" it is black where it should be and white where it should be, it doesn't look transparent. All my layers are set to "normal" mode. I'm at a lost as to what setting I must have changed?
View 1 Replies
View Related
Nov 23, 2011
I'm trying to create a nice example of a paintscheme. In order to do this correctly I need to cut lots of pieces from a picture taken from the original truck end make them in to several layers.
Now I have done this, as you can see here, not very well. There are a lot of lines that aren't cut very nice and smooth. Most of this cuts I did with the scissors tool. The tank I cut with the path tool.
What is the best way to cut pieces from images?
ps the coloured pieces are experimental
View 2 Replies
View Related
Dec 29, 2008
I am trying to get a white layer with see through writing which reveals the background image underneath. (Almost like I have put a stencil over a photograph). I have discovered this is called a clipping mask.
However, I am having difficulty using a clipping mask over multiple text layers. It seems to only do it to one layer directly beneath. I do not want to merge the text layers as I want to mess about with the design a fair bit.
View 4 Replies
View Related
Dec 22, 2012
I'd like to say something good about GIMP other than its free. I'm using GIMP 2.8.2 and Windows 7 64-bit.
How do I create a text layer?
Create new blank imageSelect the "A" text tool from the Tool Options panelClick on the imageEnter text (and select font etc.) in the popup dialogueThen wait... ?
I expected a new text layer to be created at Step 3, and as you can see in the attached screenshot my expectations are unrealistic. How do I get from the popup dialogue to an actual layer of text?
View 3 Replies
View Related
Dec 14, 2012
Long time gimp user, but for basic tasks only. Now I would like to get my hands dirty a little more. I'm trying to setup a workflow that involves CAD, Inkscape and GIMP. Basically I did some architectural drawing in CAD, used Inkscape to clean up and convert DXG into SVG, so that I can use paths into GIMP. I did a script that for every path creates a new transparent layer with a layer mask using the path, so I can add fills and textures quickly. Now to the problem: say I want to add a texture from another image, i paste the image into the appropriate layer, then I want to transform the texture a bit (scale, rotate and perspective). the result is that the layer mask is transformed, too. I tried to disable the mask during transform, but didn't work.
Is there a way to workaround this? maybe some layer mode instead of layer mask?
View 8 Replies
View Related
Mar 12, 2012
working on Layers and Layer Mask to obtain see through multiple Layers effect.Below is the description of my problem that I am looking forward towards resolution in this forum. I will be glad if some expert can guide me on this.
I have three layers of different colors as below.
Layer 1topmost layer) with Red color filled rectangle.Layer 2(below Layer 1) with Green color filled rectangle.Layer 3(bottom most layer, below Layer 2) with Blue color filled rectangle.When I erase something with brush on Layer 1 using masking Layer 1, it hollows the erased part and start showing the Green color of Layer 2 in hollow section of Layer 1.
What I want to achieve is that, when I erase Layer 1 using layer mask, then it should hollow Layer 1 as well as Layer 2 and should show Blue color in the hollow section of Layer 1.i.e: Hollow section made on Layer 1(using Layer Mask on Layer 1) should also be applied on Layer 2 so that Layer 1 and Layer 2 becomes hollow using eraser and I should see through Layer 1 and Layer 2 and Blue color of Layer 3 should be visible from the hollow section.
Though I can do this by Flattening Layer 1 and Layer 2 together so that it forms one single Image, and then when I hollow this Flattened image using Layer Mask, then it will show me Blue color. But I do not want to do this, as I would lose the flexibility to unhollow/recover the hollow region on both Layer 1 and Layer 2 independently in the future.
View 7 Replies
View Related
Aug 18, 2012
I open something with paint and then I do crop and copy the area. Then I open up another document and paste it. Now I am trying to blend it in. I think I can use layers. Create a new layer, then add a layer mask. Then, at least that's how I have seen it online, I can use the brush tool to make the background reappear around the letters ( letters in my case). But this does not work. The brush only paints it in the background color.
View 9 Replies
View Related
Jun 20, 2013
I have 2 layers and I want to mask one through the other. I've attached a png showing what I want. Here is what I am doing:
- select the text layer
- menu -> "Layer/Transparency/Alpha to selection" (now the outline letters are selected)
- select the background layer
- hit delete button
- no change in image
If I do the following steps, then the entire background is cleared:
- select the text layer
- menu -> "Layer/Transparency/Alpha to selection" (now the outline letters are selected)
- menu -> Select/Invert
- select the background layer
- hit delete button
- background image deleted
View 9 Replies
View Related
May 18, 2012
I'm trying to save a file that looks great in Photoshop and preserve it as a PNG. I'll create the image, simply "merge layers" and lose the transparency of it. How do I get my PNG to look like it does in photoshop.
The red background show through in photoshop originally...but then after "merge layers" or saving the PNG every way possible (or so I think)... the degree of transparency isn't preserved.Below looks great. (red bleeds through nicely, good transparency)
Now doesn't look so good. (all i did was merge layers and red doesn't bleed through properly anymore, same result when saving as png)
View 3 Replies
View Related
Nov 24, 2013
How would you take a layer mask, and make it its own layer? If you try copying and pasting a layer mask, you can only dock it to another layer.
View 1 Replies
View Related
Jul 17, 2012
I can't figure out how I can use a text or shape layer as a mask for the layer below. See the example attached and you will know what I mean. (I created the example with simply cutting out the text outline from the white box).
I need the text to be a mask and I need it to be editable as text. Don't know if this is possible, experimented with clipping masks but I cant make it work.
View 9 Replies
View Related
Aug 12, 2013
is it possible to select multiple layers (with layer mask) and merge them?
tell application "Adobe Photoshop CS6"
tell current document
set current layer to every layer of layer set "bloem 1-9" of layer set "Bloem"
tell current layer
merge
end tell
end tell
end tell
View 4 Replies
View Related
Jan 18, 2013
when I added a layer mask to a layer, it would display in the palette as the alpha channel, which was very handy. Now, when I add a layer mask, it only appears as the mask icon; i.e., gray square with white circle in the middle. I have no clue what I did to change from the one to the other, but I would certainly like to get the alpha representation back!
View 3 Replies
View Related
Aug 22, 2012
I have two layers. Upper most with text is locked.Bottom layer is an image I have applied a transparency/gradient mask for the raster image. Now, seems my layers palette is stuck in a mode called 'Layers (Opacity Mask)'.Not seen this before, but this is CS6. How do I get out to the main, root level of the layers palette?
View 1 Replies
View Related
Nov 11, 2012
How do I create layers in an adjustment layer and transfer or duplicate those layers in another image ?
I need to transfer the same colour readjustment from one image to several other images ... I have been told to do this in the adjustment layer platform how ever I cannot drag or copy those layers over to the other images I have open and in need of adjustment to the same layers ...
Images shows my layout and what i've done this far
View 2 Replies
View Related
Mar 27, 2013
Win7x32 and PS CS6.
To reproduce bug create any new file. Create levels layer with any mask. Activate "mask viewing" by pressing Option/Alt and clicking to mask icon on the levels layer in layers panel. Then try to call menu->select->color range.
View 11 Replies
View Related
Nov 1, 2011
How does one go about creating a layer clipping mask using the SDK?What I want to do is to simulate clicking on the "Make/Release Clipping Mask" button (the left-most picture button) that is at the bottom of the Layers Panel.
View 2 Replies
View Related
Nov 18, 2013
How can I add a layer mask to my picture? I couldn't click on it in the Layers menu, is there something I can do, for that option to be available?
View 1 Replies
View Related
Nov 6, 2012
I have a picture of a black dog which I want to merge into a black background as seamlessly as possible. I created a layer mask and blacked out the photograph area behind the dog so that the black of the layer beneath shows through. What I want to do now is somehow feather the edge between the dog and the black background to melt the two together rather than having a sharp crisp edge. Can I somehow feather the edge of my layer mask to do this quickly and easily or do I have to do it manually using the smudge tool etc?
View 2 Replies
View Related
Apr 16, 2013
I am drawing animations with the brush tool onto a black solid layer which is set to add blending mode.
My goal is to create a mask on the solid layer to hide a certain area of what I drew... but it doesn't change anything.
I noticed when I add another effect to the layer (such as curves) the mask does hide that area of the effect, but thats not exactly what I'm trying to do.
ps. I have After Effects CS6
View 1 Replies
View Related
Mar 22, 2012
I am trying to add a grey scale mask to a layer so I can alter some game files .But I must be missing something blindingly obvious. Here is how I create a mask in PSP6.
-First I duplicate the base layer.
-Then I adjust the saturation to -100%(grey). Then I adjust the lightness to +100%..This gives a grey scale image.
-I then increase the brightness by 25% and the contrast by 50%. This gives a grainy bright and high contrast grey scale image.
-I then create a mask and then add the mask to a blank layer.
This allows me to spray away to my hearts content and leaves the main detail on the original image untouched. By this method I can add mud effects to tank tracks in games and still see the original link details through the mud.
But I am having major issues trying to achieve this effect in gimp.At the moment this hurdle is stopping me getting to grips with gimp.
View 11 Replies
View Related
Feb 4, 2014
I have an image that looks like this...
[URL]
...that I would like to look like...
[URL]
So the motorcycle would be all white but stay within the bounds of the current lines of the bike. I did some digging and it looks like I need to add a layer mask which I did without any luck. When I add a layer mask which option should I choose?
View 6 Replies
View Related
Dec 31, 2012
I've had gimp for quite awhile now and ive never come across this problem before. im trying to use the layer mask with greyscale and inverted image just as i always have. but when i go to edit my color i get grey! ive always been able to change colors this way! i know that the mode is set to rgb. im on the correct layer. ive closed it. ive restarted my laptop.
If i click on the transparency part i get a big blob of color as i should. but on the mask it does what its supposed to but in shades of grey. i dont understand whats wrong! it always worked perfectly. . .
newest Gimp
windows 7
Only thing that i have changed is i have a new tablet but i still have the problem without the tablet
View 1 Replies
View Related
Jun 19, 2013
I have 2 layers and I want to mask one through the other. I've attached a png showing what I want. I tried to attach an .xcf file, but it won't do it, which seems strange for a gimp forum. Anyway, one layer is the text (black outline) and one layer is a colorful background. In the xcf, the background layer is entirely filled with the colorful stuff, but I want it to only show through the interior of the letters (as shown in the png).
Attached File(s) at-final.png (9.55K)
Number of downloads: 2
View 10 Replies
View Related
Aug 12, 2013
We use AutoCad to name our dxf files for our Burn Table and whenever we get a new part it is a repetitive task to input layers and common text. So what I am curious is can AutoCAD input the layers and text automatically using a Macro?
I want the Macro to put in 6 layers and choose the layer color and title then input text boxes with word in 3 different layers. There will be about a total of 10 different text boxes with text already put in the boxes by the Macro.
View 6 Replies
View Related
Jun 15, 2013
When you try to rescale a layer using the Rescale Tool with a layer mask active, it scales of the mask, likewise if you select the layer it will scale the layer. Can I select both the layer and layer mask and scale the layer, thus it keeps the layer mask showing the desired masked area only. As the only way I can see currently is by applying the layer mask on the layer and then you can see the layer/s below to get the scaling that is desired. But I would like to keep the layer mask active for editing after scaling.
View 4 Replies
View Related
Mar 15, 2011
Ive been looking through various tutorials on how to create a mask that leaves the detail of the hair of the subject in
It seems all the tutorials I have looked at choose a subject with jet black hair, invert it, and hey presto, job done
Unfortunately, all my kids have got fair hair, and no matter what I try, find it almost indistinguishable from the background
How to do this, cos im losing my mind trying to paint strands of hair in and having the result look like Ive cut the image out of a magazine with a pair of left handed scissors (im right handed!)
View 8 Replies
View Related
Jun 21, 2011
I have a skull on layer skull and bones on layer bones which is set to display under layer skull. I want to add a layer mask and paintbrush out the bones that are inside the skull area.
View 3 Replies
View Related
Jan 9, 2014
I'm currently working on a project in which I have a background that has a large text layer above it. What I want to do is create a sort of "dynamic" clipping mask that essentially subtracts the shape of the text from the background yet remains editable as text in case I need to change the word or font.
However every way I've tried so far as been met with the backgrounds instead being constrained inside of the shape of the text...which is NOT what I want.
How can I do this while still having the text able to be edited?
View 2 Replies
View Related
Mar 20, 2013
I would like to make a template / mask containing only text, which I could use to overlay a pictute, so that the text shows on the picture when saved & displayed as a *.jpg
View 8 Replies
View Related
