My computer died and needed a lot of work, including a new mother board and new graphics cards. Now LR 4.4 doesn't show photo's. LR seems to be working well in every other way but where the photos should be the spaces are blank.
View 5 RepliesAble to open pdd photos created in photo deluxe but only text doesn't show up.
View 9 Replies View RelatedI have used Lightroom since version 1.0 and at the moment I am using v3.3.
Now I have following problem and I can't find a solution for it: In the Navigator I have synchronized my complete folder where I store all of my photos. This folder contains more than 50000 photos already in many subfolders. But now I found some subfolders not showing all their content. I can see in the Navigator e.g. 216 pictures beside the folder name but in the preview I can see only 3 pictures! And I found some more folders which doesn't show their full content.
I tried to sychronize the single folder again but Lightroom says there were no new pictures and also no missing pictures to remove from the folder. If I open the folder by the Windows Explorer then I can see that all the files for the 216 pictures are there! So there must be a problem with the lightroom database!
But now I don't know what to do to get the pictures displayed in the library again.
I'm on Lr, edited some files to get a panorama, clicked on "edit in" then "merge to panorama in photoshop. All right until there. The problem is that once clicked it switchs to Ps CS6 and merging the pictures in a panorama but without the editing I did before in Lr (white balancing, lens correction and so on). I mean that Ps creates a panorama starting from the original pictures as if the pictures were not edited in Lr while I would like that - as I always did - Ps starts to work from my Lr's editing. I think that it is something about settings.
View 1 Replies View RelatedLightroom 5 doesn't any longer show GPS info from canon 6D in imported rawfiles. This regards MacOS-version. It works in iPhoto and in Lightroom 5 for Windows 8!
View 1 Replies View RelatedI recently subscribed to the Creative Cloud and installed both Photoshop and Lightroom.
After working with the new LR5 for the first few days I noticed that when I am within the Lens Correction and I click 'Manual' in order to manually correct perspective you always get a grid overlay that shows up when you hover over the different Transform options (Distortion, vertical, horizontal, etc...) and it no longer shows the overlay.
In order for me to correct the perspective I have to manually click Option+Comand+O in order to get the grid, which is a little bit annoying since it was automatic before.
Lightroom doesn't import my GPS data - it is there in the RAW (NEF) and jpeg files but doesn't show in the Metadata within Lightroom. Nikon View NX shows the data but I want to use Lightroom!
View 5 Replies View RelatedI created a colorchecker passport profile for my new OMD EM1 camera and it doesn't show up in the list of camera profiles. At least one other person I know with this camera is reporting the same issue. I am on a brand new download of Lightroom 5.2.
View 2 Replies View RelatedI have LR3. Following function doesn't work for me: there is no preview in Navigator for presets.
Should be: " To preview the effects of a preset on your photo, move the pointer over it in the Presets panel and view the effects in the Navigator panel."
I have Lightroom 4.3 and a Canon 6D. I cannot get Lightroom to display my Camera Calibration Profile when I am developing a raw file.
I have dug through the MAC Library and Application Support folder and found CameraRaw. That folder contains my listed cameras. But when I am in Lightroom, I do not see that profile in the Camera Calibration section.
Is there a way to force Lightroom to display my camera profile? Lightroom 2 used to display it.
I am trying to import pictures into Lightroom 5.2 and I am not able to. When I open the import window I don't get any thumbnails (pic below), but when i click on the images, I can see them fine. After I choose the file location and press import, it hangs up and never finishes. The picture of the Copy and Import Photos is attached too.
View 1 Replies View RelatedI have my photos on a separate volume at /Volume/Users/Lightroom Photos/…
Everything works fine except when I choose "Edit in Photoshop CS6", work on the image in Photoshop then save it. It gets saved back to the same folder as the original file, but when I tab back to Lightroom it just shows a square tile with a question mark instead of the new file. Tapping on the exclamation mark reveals that Lightroom thinks the new file is supposed to be in /Users/Lightroom Photos/…
For example the dialog box might say:
“_DSC3047-Edit.tif” could not be used because the original file could not be found. Would you like to locate it?
Previous location: /Users/Lightroom Photos/2012/2012-12-08/_DSC3047-Edit.tif
When in reality the original and the edit are both in /Volumes/Users/Lightroom Photos/2012/2012-12-08/ and there is not, and never was a /Users/Lightroom Photos/…
That is, something about saving back from Photoshop stripped off the "/Volumes/" from the beginning of the path. I can choose Locate and find it right where it should be and it will show up. Once it shows up the image tile shows the image but has an exclamation mark; tapping on that brings up a dialog box that says:
The metadata for this photo has been changed by both Lightroom and another application. Should Lightroom import settings from disk or overwrite disk settings with those from the catalog?
This is on a Mac and so /Users does exist but that maps to /Volumes/Macintosh HD/Users. I wonder if either LR or PS is confused by there being a /Users and a /Volumes/Users.
Editing in a Nik Plugin (e.g. Silver Efx) works properly, FWIW.
I am using LR4.2 and PS CS6 13.0.1 on OS X 10.8.2.
I'm having an issue using LR4 where when shooting in tethered capture mode the previewed image wont advance to the photo you have just taken.The file is there, but you have to manually advance to it.
View 1 Replies View RelatedThe library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it.
View 1 Replies View RelatedThe adjustment brush in the Develop Module doesn't show any effect
when I try to use them in Lightroom 5
Looking forward to this update because i use a Fuji X pro 1 and I had read that lightroom 4.4 now supports this camera and sensor.
However after updating all I get in the Lens adjustment under Fuji is the Fuji x100 which has been their for some time.The exif info is showing the correct camera and lens used etc.
I have tried uninstalling and then manually removing any left over files and folders with no luck.
Do i have to install support for this camera as an addon?
Also if i look in the lightroom folder Camera profiles/camera it only lists Canon, Nikon and Sony
Somehow, the little triangle that opens and closes the Quick Develop Module in my Library has become solid, so it no longer pops the menu open when I glide my cursor over to the right side of a full screen image. How do I get the Quick develop module triangle to have that shadow look again so that when I glide the cursor to it the module opens.
I must have changed this with a keystroke or something but for the life of me I cannot get it back and it's driving me crazy. I do not like the module open all the time and it's a pain to use the keystroke or click the triangle each time I need to make a quick adjustment. I hope this is not an upgrade change. I notice it is the same in my develop module.
In Library mode, the Navigator does what I'm used to from previous versions of Lightroom -- it shows a preview of the currently selected photo. However, when I go into "Develop" mode, the Navigator chooses another photo from the collection I'm working on (always the same one, it seems) and shows that one. This is frustrating, because I like to use the Navigator in Develop mode to see previews of an edit I'm working on. It's also just nonsensical that it shows a different photo.
View 5 Replies View RelatedMy Lightroom 5 doesn't preview photos in raw from my new nikon Df? How come? I use Mac OS 10.8.5.
View 5 Replies View RelatedI'm not sure what the heck is going on. All my photos are missing in that blanks show up, not the photo when I go to library. There is the ? which I understand that lightroom can't find the photo but I do have my external hard drive attached but lightroom is only connecting to the C: Drive.
View 3 Replies View RelatedLightroom 4 doesn´t show video files from my Nikon D5000.
It crashes: Load Library failed with error 126: Das angegebene Modul wurde nicht gefunden.
I have WIN7 64bit.
I am cloning a photo... no problem... I changed the resolution, then the clone stamp doens't do anything. I changed the resolution back, still doesn't work.
I click on the color I want it to clone using the option key (I have a mac), then when I put it on the area that I want to change, nothing happens.
I'm using Lightroom 4.2 (I have used Lightroom since the very beginning) and I found following problem:
I am in the development moduleI select all photos in my folderI activate the automatic synchonizationI change the selected user defined lens from the Tamron 70-200/2.8 (which is wrong) to the correct Tamron 28-75/2.8 (-> there's a known problem in the automatic detection of the different Tamron lenses because of the ID in the lenses, so automatic detection doesn't work - tell me if I am wrong!)The progress bar shows that it's writing the changes to the selected photos (which takes a moment)Then it seems to be synchronized and I continue workingAfter some photos it shows the 70-200 mm lens to be selected again!
So obviously it didn't sychronize all selected photos!
My system: Windows 8 64-Bit computer, 16 GB RAM
Only 422 of 468 photos show up on the import screen. What's happening?
View 12 Replies View RelatedI tried to import my PSE10 catalog into LR4 on a Mac (lion).It only imported 92 photos out of the 12000. it says: Some Photoshop Elements photos were not included in the Lightroom catalog. The pohotos and reasons are listed below.These files were either unavailable or damaged. (15216).These files are not supported by Lightroom. (10)They all there and could be imported.However, in that case, all the collections are gone.
View 1 Replies View RelatedI downloaded the Lightroom 4 trial program. After watching a tutorial on importing and organizing I imported a few photos from the hard drive on my laptop. All the functions of the program are working but the images of the photos don't show up.Do I need to uninstall and reinstall the program? Can I do that and still have the trial time of 30 days? Is there some other on/off thing I need to do to make this work?
View 7 Replies View RelatedHow can this possibly happen? The section Apply During Import in the import dialog screen has a field for Develop Settings, but this field says None, so nothing should happen to the photos during import. So why do the display in B&W in Library?
View 3 Replies View RelatedI have created a dynamic block which has hatchings in it.
In the block editor when I do a test of the block everyhting runs smoothly.
Howevfer when it is in model space it fails to keep the hatch boundary associativity. Even when the same dimensions are used as the block has as default.
Why would this be?
I am trying to append GPS data to my photo's using a track log which I have converted from KLM to GPX. The information loads onto the map just fine, but after selecting the option 'Auto-tag xxx selected photos' the process bar does appear in the top-left corner, but never progresses.
View 3 Replies View RelatedI'm just trying out LR5. I've watched vidoes where in LR4 you can setup a slideshow to play from a folder, and while the slideshow is playing you can take new photos from a tethered camera and it will automatically add it to the slideshow.
In LR5, on my computer (Mac), the incoming photo seems to get stuck and does not make it into the slideshow. I have to stop the slideshow, and restart it to see the new incoming photo taken by tethered camera. I need this function for an event, so I'm just wondering whether I'm doing something wrong, or whether it is a bug in LR5?
I've selected the mode "Use: All Filmstrip Photos". What I've observed is that while playing the slideshow without going fuill screen, a newly taken photo from the tethered camera appears as a white tile, but then the thumbnail contents do not change. When I stop the slideshow, the photo then gets "Developed" and then it will be in the slideshow the next time I play it.
When I import pictures from my SD Card I usually leave copies on the card for a while so I have them as backup, and to also be able to see recent pics on my camera. However each time I go to import pictures from that card within LR, it defaults to selecting all pics on my SD card even though I have the "New Photos" filter selected at the top of the import box. It always puts all my photos in the "New Photos" section, so I have to deselect all the photos that I have already imported into my catalogue so I don't get duplicates. How do I get LR to only import pics that haven't been imported bfore?
I am aware of the "Don't Import Suspected Duplicates" option, but that is not the samea as what I am looking for. It only deselects photos that still exist in my catalogue. Any photos that I have deleted from my catalogue remain selected in the import box as it doesn't see any duplicates.
what I'm missing to have LR only select photos that haven't been previously imported from that card?