Lightroom :: Doesn't Preview Photos In Raw
Jan 2, 2014My Lightroom 5 doesn't preview photos in raw from my new nikon Df? How come? I use Mac OS 10.8.5.
View 5 RepliesMy Lightroom 5 doesn't preview photos in raw from my new nikon Df? How come? I use Mac OS 10.8.5.
View 5 RepliesI have LR3. Following function doesn't work for me: there is no preview in Navigator for presets.
Should be: " To preview the effects of a preset on your photo, move the pointer over it in the Presets panel and view the effects in the Navigator panel."
I recently deleted a few files in cleaning up my desktop, however, in doing so managed to delete a few folders that had some really important photos on them. In lightroom I still have the previews for them, but can't work out if/how I can restore the photos from the previews.
[URL]
Is there a downside to enabling smart preview for all photos in catalog?
View 3 Replies View RelatedWhen importing directly from camera into Light room, after ticking 'Preview' only a blank grey image with file number is displayed and no image
View 2 Replies View RelatedSome of my imported photos are showing blank in preview mode before I import, reading Preveiw unavailable for this file. Does this mean when I import they wont be imported.
View 1 Replies View RelatedI'm using Lightroom 4.2 (I have used Lightroom since the very beginning) and I found following problem:
I am in the development moduleI select all photos in my folderI activate the automatic synchonizationI change the selected user defined lens from the Tamron 70-200/2.8 (which is wrong) to the correct Tamron 28-75/2.8 (-> there's a known problem in the automatic detection of the different Tamron lenses because of the ID in the lenses, so automatic detection doesn't work - tell me if I am wrong!)The progress bar shows that it's writing the changes to the selected photos (which takes a moment)Then it seems to be synchronized and I continue workingAfter some photos it shows the 70-200 mm lens to be selected again!
So obviously it didn't sychronize all selected photos!
My system: Windows 8 64-Bit computer, 16 GB RAM
My computer died and needed a lot of work, including a new mother board and new graphics cards. Now LR 4.4 doesn't show photo's. LR seems to be working well in every other way but where the photos should be the spaces are blank.
View 5 Replies View RelatedI tried to import my PSE10 catalog into LR4 on a Mac (lion).It only imported 92 photos out of the 12000. it says: Some Photoshop Elements photos were not included in the Lightroom catalog. The pohotos and reasons are listed below.These files were either unavailable or damaged. (15216).These files are not supported by Lightroom. (10)They all there and could be imported.However, in that case, all the collections are gone.
View 1 Replies View RelatedI am trying to append GPS data to my photo's using a track log which I have converted from KLM to GPX. The information loads onto the map just fine, but after selecting the option 'Auto-tag xxx selected photos' the process bar does appear in the top-left corner, but never progresses.
View 3 Replies View RelatedI'm just trying out LR5. I've watched vidoes where in LR4 you can setup a slideshow to play from a folder, and while the slideshow is playing you can take new photos from a tethered camera and it will automatically add it to the slideshow.
In LR5, on my computer (Mac), the incoming photo seems to get stuck and does not make it into the slideshow. I have to stop the slideshow, and restart it to see the new incoming photo taken by tethered camera. I need this function for an event, so I'm just wondering whether I'm doing something wrong, or whether it is a bug in LR5?
I've selected the mode "Use: All Filmstrip Photos". What I've observed is that while playing the slideshow without going fuill screen, a newly taken photo from the tethered camera appears as a white tile, but then the thumbnail contents do not change. When I stop the slideshow, the photo then gets "Developed" and then it will be in the slideshow the next time I play it.
When I import pictures from my SD Card I usually leave copies on the card for a while so I have them as backup, and to also be able to see recent pics on my camera. However each time I go to import pictures from that card within LR, it defaults to selecting all pics on my SD card even though I have the "New Photos" filter selected at the top of the import box. It always puts all my photos in the "New Photos" section, so I have to deselect all the photos that I have already imported into my catalogue so I don't get duplicates. How do I get LR to only import pics that haven't been imported bfore?
I am aware of the "Don't Import Suspected Duplicates" option, but that is not the samea as what I am looking for. It only deselects photos that still exist in my catalogue. Any photos that I have deleted from my catalogue remain selected in the import box as it doesn't see any duplicates.
what I'm missing to have LR only select photos that haven't been previously imported from that card?
I have a catalog with all photos imported from a trip I just got back from. But when I compare the catalog to the actual photos in the folder, there are 104 pics missing from the catalog. If I try to sync the catalog, it says 104 pics need to be imported, but the import process says there are no new photos.
I created a new catalog and tried to import the folder again, but its still missing the same 104 pictures.
Lightroom 4 catalog does not recognize photos when external hard drive switched to a different USB port. The photos are in My Photopraphs in an external hard drive. I recently had to switch ports and now the catalog can't find the photos.
View 4 Replies View RelatedI recently bought a Nikon D7100. I took some test shots and imported the images to Lightroom 4.4, then generated 1:1 previews for all the images.
Previews zoomed to 1:1 in Library Mode are noticeably soft. The image below is a screen shot of the Library preview:
Moving to Develop View produces a higher-resolution 1:1 preview. The image below is a screen shot of the Develop preview:
Look at the bricks and window screens to see the difference.
This difference occurs immediately after import (with a User Preset applied during import). Once any Develop work is done, the Library preview updates and displays at full resolution.
This problem makes doing initial editing/selection of images time consuming, because I can't determine the sharpness/quality of imported images until I've done some kind of Develop adjustment on each image.
I am using MacBook (late 2008) OS X 10.9.2 and recently upgraded to Lightroom 5.3 from Lightroom 4. After a while, some photo started to show exclamation mark at the right hand corner of the photo (*.CR2 raw files in NAS) in grid view. When I click on the exclamation mark, it shows a dialog with following message; "Lightroom has encountered problems reading this photo". So, I moved previews.lrdata, which is about 9GB, to the trash and restarted the Lightroom 5, expecting Lightroom 5 to create a new previews.lrdata. However, it won't create any preview at all.
exclamation mark at the top right hand corner of the photos in grid view.
size of Previews.lrdata file stops at 152KB.
I am working on a motion graphic, it contains a background a camrea and a couple 3d layers, when a I render it it a 2 of the 3d layers shake randomly. This does not happen in the preview. Using CS4
View 2 Replies View RelatedI work in Mac OS Mountain Lion. PSD preview doesn't update when i change psd-file placed on external hdd or flash drive (ntfs or exfat).Create psd-file. Сhanged psd-file in Photoshop cs6 (preview don't update).
View 5 Replies View RelatedWhen I add a layer to a photoshop file, flatten and save, the preview only shows the layer that I added, not the whole file. See info window below. It causes problems when I send it to other people, they think I haven't sent the correct file. How do I get that preview to update?
View 4 Replies View RelatedI'm using AutoCAD Map 3D 2009.
I've created a simple drawing in CAD that contains a cropped JPEG, a two toned hatched polygon in behind it two MTexts overlaying all.
I cannot view them in either normal plotting, pdf format, jpeg format and even dwf.
I've increased the ram used in the "Raster Extension Options" (2000 MB), I've set the plotting in the "Process Document" to "...In computer", I've saved it in older formats (2000/2004/2007), I've placed the drawing on both our public drives as well as the local, I've adjusted the "Raster and Shaded/Rendered Viewports" & "OLE" settings in the "Device and Document Settings" (None to Best). Not to mention the other variations in the plot menu.
I've tried everything I can think of and have read through several threads here and nothing works.
What drives me nuts about this, is that I'm able to print from a layout with no problems a 3D drawing, with 2D hatching, an extensive title block with hatching and a secondary overall viewport (minimal detail) in the main viewport area.
I have a problem with previewing effects in Illustrator. When I do this:
- create or select object
- go to appearance panel
- choose FX -> Stylize -> Drop shadow...
- check Preview in the effects window (it works as expected)
- now uncheck the Preview checkbox (when unchecked, the fx is still visible)
So, unchecking this Preview checkbox doesn't work right. It is very annoying. It is broken for most of the effect in illustrator. Strangly, it works fine with rounded corners effect. But other effects... not.
Here's the screen shot. If I ignore the preview, and set with the print area tool, I get what's in the print area tool. Something is amiss in the land of tiling settings, but I can't get to whatever setting is messing this up.
View 1 Replies View RelatedI have a drawing that I created with acad 2010 that has a pdf xref attached. I just updated to 2013. And now when I go to plot the drawing my xref shows up in preview but doesn't show up on the plot.
I can go back to my 2010 version, and it plots fine. What gives?
I have a sheet that has several alignments data referenced and labels applied. Recently some of the alignments changed (slightly extended), I checked the sheet and all of the labels have auto updated. Everything looks good. A Print Preview looks good.
When create the print (to pdf), the alignments that changed and all the labels do not show up. Nothing changed with layers, styles, etc. I tried Synchronize and Refresh from Prospector. I can create another Data Ref but don't want to go thru all the labeling again.
Preview and pdf attached.
C3D 2012
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
Just downloaded LR 5 and noticed that I cannot jump back from a Publish Service folder preview to a different folder preview in grid mode. The only way to view photos in another folder is to restart LR 5. This only happens when I am viewing photos in a Publish Service such as Flickr.
I updated from LR 4 using Creative Cloud installer.
When I select photos in library or on the video track they go black in preview window... nothing appears. But not all... some don't go black. This happens after working on project for 15-20 minutes. When I first start up computer they all appear in preview when selected. No problem then. Same if I shut down and restart computer. Only after working on project awhile does it happen. Also after some time working I get window saying no memory. I thought with 4 ram I could work for hours before getting any problems like this. I plug in my external WD Passport HD only for backups. And with MacShield filter turned off, still have problem. Could it be the VS Pro X5 software?
View 3 Replies View RelatedI downloaded some photos to a file under my Photos. When I go to get photos from the file, they aren't there (in windows explorer). What is locking these out?I've tried other downloads, they work fine. Running version 10. I uninstalled & re-installed with no luck.
View 2 Replies View RelatedAble to open pdd photos created in photo deluxe but only text doesn't show up.
View 9 Replies View RelatedWhy doesn't Adobe Bridge download files from "get photos from camera", error message" Adobe Bridge CS6 cannot obtain files from this device. ensure that the device is connected properly,or that the battery is charged,and try again.
When I'm using a card reader that does not require batteries, is it because they are Leica DNG files??? I have managed to drag and drop instead but would prefer to use "get photos from camera".
I'm unable to drag a group of photos or even single photos to a publish folder. In this case it's SmugMug. What is the correct method?
View 2 Replies View RelatedI copied photo folders from my hard drive to lightroom 4 and edited them but then accidentally removed these folders from lightroom. I then imported these folders again into lightroom but all the edits I made orginally in lightroom don't show up for the individual photo's.
I backed up the Lightroom catalogue regularily. Is there any way I can reattach these edits to their respective photos'. There is lot of photo's involved.