I can't seem to adjust the Writing Direction in both Illustrator and InDesign CC. The RTL and LTR buttons are not availble in the Paragraph panel at all. I need to create bilingual doucuments in both Arabic and English. I tried going through the settings, I checked my mac settings and nothing works. All other software can work this function, even with shortcuts except the Adobe CC software I have.
View 5 Replies
After making a Rounded Rectangle I often need to adjust the rectangle in the X or Y direction to fit a certain space. As I reproportion the box the three node points of the radiused corner also reproportion, distorting the radius. Any way to reproportion a Rounded Rectangle and keep a true, undistorted radius? And even better, resize the rectangle and keep the original radius.
Illustrator CS6
If there is a tool where I can take a selection & adjust it all different directions? I'm looking along the lines of taking a text selection & doing what I did with "flounder" & "Harmonic prophecy" in the attached pic. Nothing fancy. Just something I can't figure out. I used a different program to do that flier.
View 2 Replies View RelatedWhen I select an anchor point with Edit Anchor tool, the Property bar activates settings for adjustment of this anchor point. I can change the angle at which anchor point receives connection. When I de-activate this button (see the picture) it de-activates the angle field... and nothing changes! The connector behavior is the same as before.
The question is: What is the function of that button? I think there must be only the angle field.
I have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
I have created a linetype with the text GAS OPTION in it. The line is continuous with a break around the text. In a straight line the linetype works fine (breaks around the text etc). However, when I use a polyline and spline the line for a curved line the text aligns with the direction of the line at the start, but when the line bends, the text suddenly changes direction and reads in the opposite direction. It looks like AutoCAD is trying to keep the text upright rather than following the direction of the line. When the text changes direction it also changes its insertion point and overlaps the continuous part of the line. I have 2013 AutoCAD.
Here is the string I used for the linetype.
*GAS_Option_LINE,Gas line ----GAS OPTION----GAS OPTION----GAS OPTION----
A,8,-15,["GAS OPTION",STANDARD,S=2.54,U=0.0,X=-2.35,Y=-1.27],-12
Is is possible to write a plugin as a suite and expose its api to other plugin?
View 4 Replies View RelatedI have cut several sections at different points along a road alignment. The sections are cut facing the same direction as the alignmnet. Is there a way to reverse the section direction without changing the alignment direction?
View 6 Replies View RelatedI have just purchased this upgrade software having used XARA Xtreme4.0 for many years.How can I change the black background screen with white writing to grey with black writing?
View 9 Replies View RelatedI have a frustrating problem in CS3 that when writing a block of text, either with text tool or area text tool, that the cursor disappears. I need to see its new position after using the space bar or tab: ready to input the next piece of text.
It seems to be flashing some of the time if I click into the middle of the text block, but disappears where I want to continue it at the bottom of the text block?
I have a drawing of a stone railing section and I have to change direction in the run direction of the baluster panel. Is there a way that I can move the details without changing th Y direction of the details. Please refer to the attached CAD file for details. I am trying to avoid having to redesign the panels if possible. railing detail.dwg
View 6 Replies View RelatedThe characters of a word in Hebrew need to reverse their text direction despite the font being Adobe Hebrew which you would expect to be in the correct direction. However this text was copied in from Word.
I can't locate the menu option, e.g. Window>Type>Paragraph fails to show any RTL option. That the text is selected seems indicated by the bar at the top of the screen showing point size etc.
I have a line of type which obeys the Perspective on one Plane, but I want it going the other way : From my image can you see it's coming from left and getting bigger to foreground. I want it starting on the right face of the Perspective grid, but it won't obey
View 3 Replies View RelatedWhy is it that when I apply a gradient to a stroke I cannot use the gradient tool to change the direction or position of the gradient? I can make a fill and offset the path and then move that gradient (which is a very similar effect), but gradient tool does not work on a stroke. I am just baffled by the idea that I can put a gradient on a stroke but then only change it by using the gradient palette to change the angle and /or height /width...and that honestly dosen't work well.
View 2 Replies View RelatedI need to change the direction of type on a path. Basically it is writing the sentence backwards right now. I need it to type right to left instead of left to right so the first word of the sentence will be all the way left instead of all the way right.
View 8 Replies View RelatedI'm having trouble merging paths. I'm combining the multiple paths with arrows to make the 3D effect (which is on all of them obviously) flow as one instead of on top of eachother. When I use the compound path command it reverses all my arrows and I have no way of changing them back without releasing the compound path (which puts them back to their original state of being on top of eachother)
View 3 Replies View RelatedEver since CS5, the move function has operated normally in the horizontal direction but backwards in the vertical direction. In other words, entering a positive value moves objects down, entering a negative value moves them up.
At first I thought this was a bug, but it has continued in CS6 and CC on every computer we have. Yes I'm getting used to it but it's opposite of every other software package we have or have ever had, including Illustrator up to CS5.
I can't find a user control to correct this. Is there a way to do it?
I'm trying to nudge the anchor points on an object randomly (to get an informal look). (I know some Effects do this already.)
Maintaining corner points is no problem - you just set the direction handles to the same coordinates as their anchor.
But I can't nudge a smooth point in the way I want to, which is to move the anchor but maintain the direction handles in exactly the same relation to their anchor as they had before. That is to say, they should remain smooth points.
My script calculates the difference between 'before' and 'after' positions of the anchor, and applies that difference to the direction handles… but in practice the smooth points are converted to corners, because the direction handles don't maintain their relation with the anchor.
var docRef = activeDocument;
var objects = activeDocument.selection.length;
var cShift = prompt("Point shift (pt)",5);
// loop through all objects
for(var count=0;count<objects;count++)
[Code] .....
In AICS6 I have a compound path made of two half-circle looking shapes. They have to be separate because they are puzzle pieces. Inside of this I am placing an AI illustration that is a group of over 100 shapes. The problem is this: Once inside the compound path it is impossible to adjust the position of either the placed image or the path container. Let's say I want to move the path around the image. If I use the direct seletion tool it will only select part of the path. This happens even if I group the two parts of the path. It then wants to deform the half-circles rather than move them. If I select both halves of the compound path and try moving it with the keyboard arrows nothing moves.
If I select both with the white arrow and then switch to the black arrow the result is the same. OK, dead end. The other option is to move the image and keep the path container stationary. When I select the image with the direct seletion tool, however, it only selects one of the hundreds of vector shapes making up the image. Even if they are grouped, it will only pick the one part. This is really amazing because it works so easily in InDesign, but you can't make the kind of picture boxes in ID that I need nor the type of clipping paths I want in Photoshop. It is best done in AI, but as is often the case there is a critical feature missing that is found in another part of the so-called "suite" to do something that shoud be simple. I'm hoping that's just it: that I'm missing something really simple. don't tell me to raster the vector image. I know that would work, but that is not a solution. That is a concession. If that is the only way, however, I'll do it.
Is there a way I can adjust the spacing of objects like I can adjust the tracking of text. just a simple slider that adjust the distrobution of them. the objects are all different hights so there isn't anything in the align window that is useful. I'm looking for something that I can say "space 20px apart" or "space 12px apart." and dont have to deal with moving each object individually.
View 2 Replies View Relatedillustrator cs4. when press on drawing or text, it cannot be adjust on it width or height by mouse! Photo 1 cannot adjust. Photo 2 (sample) can adjust
View 4 Replies View RelatedI've used image trace to trace the outline of a street grid and expanded the trace into paths. However, after doing so, I realized I wanted the streets a bit thicker, so I increased the stroke value.
Is there a way to adjust the old paths to match the new outline? I tried saving it as a .jpg and retracing but the quality was subpar. Any way to "redo" the trace in the original file, or somehow tell Illustrator to move the paths to match the increased stroke? I need them to coincide once more with the edges of the streets. URL...
Is there a way to adjust the color of a pattern fill without changing the actual pattern?
Sometimes I do this by overlaying another solid color fill on top of the pattern fill, and use multiply or other blend modes. This works except when the pattern contains empty/transparent areas: in this case the solid color would pass through and affect the object below the pattern, which is unwanted.
So basically, is there a way to isolate the color change to a single object? I've tried with "Isolate Blending" and "Knockout Group" with no success...
I'm unable to adjust the weight of a path. Here's a 40 sec video (no audio, 1920x1080) that demonstrates I know how to adjust the stroke weight on a path, followed by a demo of it not working when I try to adjust it:
[URL]....
Here's what I do in the video:
First, on a path that allows the change:
Select an elipse.Increase the stroke weight of the elipse.Control-Z to undo.Decrease the stroke weight of the elipse.The above demonstrates I know how to adjust the path weight (at least I think it does).Next, on the path that doesn't allow the stroke width to be reduced: Select path. Increase stroke weight to demonstrate it increases.Control-Z to undo.Decrease the stroke weight to .25 to demonstrate it does not reduce in size.
What do I need to do to decrease the weight of the path I am trying to adjust?
I am using Adobe Illustrator CS6 and need to adjust the map scale of an image. In my class, we were told to go to the Image menu bar then click on Image Resize, but I do not see any of these options on CS6- they are on CS5. How do I get to Image resize? Also, where is Image Mode?
View 5 Replies View Relatedwhen working on illustrator my selection tools won't adjust shapes anymore. I can move shapes around but I cannot resize them or stretch them. If I have a rectangle shape on my screen selected, the hash marks that are normally in the middle are no longer there, also at the edges of the rectangle the selection tool doesn't change over to the rotate tool. My selection tool also has a small black square at the bottom right of it that I haven't noticed before. I have no clue how I got into this mode, preferably without resetting all of my preferences,
View 6 Replies View RelatedHow do you adjust the scale image percentage to extend out to the hundreths place instead of rounding to the nearest whole number?
View 1 Replies View RelatedThe program launches. That's about all it does.
Ex. I drew a box with a white fill and black border.I tried to swap the fill and border and nothing happened.I zoomed out and it showed the change. Basically anytime I do something I have to adjust the zoom to get it to show the edit I wanted.
Then it won't let me close the document or quit the program. Not sure what to do.
I'm looking for an existing, or a way to create, a shortcut that will adjust the stoke width in Illustrator as I draw. Something similar to the bracket key in Photoshop for changing brush size on the fly.
View 3 Replies View Relatedwhen i add a text to and make it full justify, it leaves lot of spacing and some lines have more spacing between words than other in short it does not look good , how can i make it proper looking
View 4 Replies View RelatedMY AI is freezing, not allowing me to move or adjust, rotates without command. Just not listening . Sometime it will move other times cursor not responding.
View 11 Replies View Related
