Illustrator :: Adjust Color Of Pattern Fill?
Jun 23, 2012
Is there a way to adjust the color of a pattern fill without changing the actual pattern?
Sometimes I do this by overlaying another solid color fill on top of the pattern fill, and use multiply or other blend modes. This works except when the pattern contains empty/transparent areas: in this case the solid color would pass through and affect the object below the pattern, which is unwanted.
So basically, is there a way to isolate the color change to a single object? I've tried with "Isolate Blending" and "Knockout Group" with no success...
View 9 Replies
ADVERTISEMENT
Apr 9, 2013
I'm trying to figure out a way to automate a simple, yet repetative process I do countless times a day. Ideally, I'd like to tie it to a keystroke to speed up my workflow.
I work on line art and colorways for footwear, so the way I'm coloring these shapes and strokes break apart the different materials and pieces of the shoe.
While coloring line art, I work with Pantone spot colors as fills for closed path objects. I then have to manually apply that same color to the stroke, set the stroke to 0.5px weight, convert that spot stroke color to CMYK, and add 15% to the K value.
I found some code in an older post for applying the actively selected object's fill color to the stroke, but I'm having but I'm having trouble with the next step of figuring out how to take that spot stroke color and convert it to a CMYK build that I can then add 15% black to. Is this something that's even possible? I've spent about an hour playing with the script and have only had luck matching the fill color or turning the stroke white.
View 13 Replies
View Related
Jun 2, 2013
I'd like to apply a pattern above a color fill, at the moment I apply the color fill, then I convert it to a smart object and apply the pattern, this because if I apply pattern and color fill, the color fill goes above the pattern covering it.
There is a way for skip this procedure and apply the pattern above without smart objects?
View 10 Replies
View Related
Sep 22, 2013
I've used the Fill>Pattern to tile my seamless patterns tons of times and never had this issue. Suddenly , it started making each tile on the large canvas a different color when I apply Fill>Pattern. At first I thought it was a tip or guide to see the repeat edges , but it shows up in print preview too. What did I do and how do I correct it?
View 4 Replies
View Related
Feb 17, 2013
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
View 4 Replies
View Related
Jul 30, 2013
Is there a way that the background fill of a pattern can fill the whole pattern so that there aren't gaps like the above picture? So that it woudn't matter if you expanded the border there would always be a solid fill background?
View 4 Replies
View Related
Sep 30, 2013
I am trying to make a hatch pattern in Illustrator CS6 with the pattern tool so I can apply a clean, single lined hatch to various shapes (some small some big - but the hatch needs to remain at the same seamless scale). I understand that there is a Basic Graphics_Lines Pattern under the Swatches Palette, but I don't understand how to edit it with the Pattern Options dialogue box.
I must be missing something, because I wouldn't think making a single line at 45° repeat at the same spacing for a shape fill would be that difficult. I shouldn't have to make a line with the pan tool at a stroke of 1000 with a 0.1-3 dash and make a clipping mask should I?
Basically I don't know how to make a pattern's lines match up when I do the 5x5 or 3x3. I tried doing 1x1 and the result is that of the image with the red stroke...still not aligning. Do I need to get mathematical with the size of the line I'm drawing and its stroke to allow H and V Spacing to work?
View 1 Replies
View Related
Aug 28, 2013
How do I fill a face in a Live Paint Group with a pattern on a colored background?
View 17 Replies
View Related
Dec 17, 2012
see xcf attachment...
I used a heart fill pattern of the right 75% of the picture and the left 75% of the picture is selected overlapping the first fill in the background... I want to fill the selected background area with a flame fill pattern where it overlaps the selected portion of the heart pattern as well as the transparent area... 'overlay' looks better but Gimp is FAILING to fill the transparent areas, it ONLY fills the overlapped heart pattern portion of the selected content!!! I even tried filling the transparent area with 'white' then filling the selected area, but it STILL ONLY wants to overlay fill the heart pattern, it STILL leaves the rest alone!!! it doesn't matter if the background is white or transparent, it leaves that alone and ONLY fills the heart pattern area of selected portion of the image!!!
View 3 Replies
View Related
Jan 6, 2013
I have a question regarding illustrator. Let's say I have a circle with blue fill and red stroke. And I place an image in the illustrator file. Now I want to change the red stroke of my circle to let's say a purple color by sampling the color from the image.
How can I achieve that with a eye dropper tool? Every time when I try to sample a color from the image, the whole circle will change to purple instead of just the stroke? I have tried multiple key combination, shift, alt, ctrl but they all don't work.
View 7 Replies
View Related
Nov 14, 2012
I have a file with two squares with red and blue fill colors respectively and transparent surrounding strokes. I'm trying to find a way to automatically set the stroke color of each square to the respective fill color. Is there an Illustrator script somewhere that would achieve that? I am not aware of an internal Illustrator command for this purpose.
View 8 Replies
View Related
Feb 14, 2013
I made a pattern in illustrator c6 (lets say simple dots in rows) and I want to color this dots with a swatch (which means a specific color that changes automatically when I change this particular swatch). It does change the color but it also causes a lot of troubles, it makes weird compound paths and illustrator gets very slow...
View 2 Replies
View Related
Nov 5, 2012
I'm working with a couple Illustrator stock patterns. I'd like to simply invert them so they're white instead of black. Any way to do this without actually editing the pattern itself? The one I'm working on is too complex to edit effectively...
View 3 Replies
View Related
Mar 4, 2013
I am using Adobe Illustrator CS6 Classroom in a Book which refers to 'Fill color in the Control panel' without explaining what exactly it is. Googling "Fill color" returned an image of a label 'fill' but my Illustrator CS6 has no such thing. Instead, it shows a couple of pull-downs when the Selection tool is selected. what Fill color is on this Control panel.
View 1 Replies
View Related
Sep 3, 2012
I have attached a logo I am working on. I have used the Stroke feature to put the black line around the letter "T". However, no matter which I choose "Inner" "Outer" or "Center" option, the stroke still seems to leave a curved edge to it, as you can see in the photo attached.
I would like it to be completely squared off.
I was thinking this has to do with the type of brush that the stroke feature is using. Can this be adjusted.
View 1 Replies
View Related
May 23, 2012
I have come across a rather disturbing bug in Illustrator when copying an object with a color fill from one document to another.
Both documents have the same color space. Lets look at this example to see the condition. Make two documents with the same color space.
Make an object and assign a color to it. Lets say Pantone 201C and set it to a CMYK build - not a true spot color. Now make another document with the exact same Pantone 201C color - but specify it as a true spot color. Now copy and paste from one document to the next. As you shall see, you will get a dialog box warning you to add or discard the color to the recieving document as expected. This is a good behavior that tells the user that you have the same color builds but assigned different values.
Now what happens if we assign one document a book color value of PMS 201C and the other document a "spot" color build of PMS 201C. So we now have two PMS colors in two documents with different values assigned to them. Drag and drop or copy and paste an object from one document to the next. You shall now see that the recieving document now has two objects with the same PMS name, but two different color builds (and visual color differences).
What should happen in this situation is the user be prompted with a dialog box to either merge the two similar PMS spot color builds or add - like what you see when copying an object with the same color buld name, but has a different value assigned between the two.
Some of our designers are just going ape over this condition and I hope this bug could be addressed in a .01 release.
View 7 Replies
View Related
Nov 23, 2013
Having trouble getting illustrator to assume my fill color when setting text. Each time I set type it reverts back to black regardless of the fill color I've set up. I can change it back once it's set but I'd like to illiminate the extra step. I've tried synching to my old settings but thats not working. It there a way to get it to behave like my older version where it just uses the fill color for text without reverting to black?
View 2 Replies
View Related
Aug 8, 2012
I have button drawing for web in Adobe Illustrator format. I'm trying to get fill settings to create the same look with CSS. I can't find what color to use and gradient settings.
View 1 Replies
View Related
Sep 3, 2013
I am working with scripting in Ai, fill gradient color in TextFrame. I search in this forum but the other topics fill color to path or line. For now, I can make a gradient color, but I don't know how to apply it to textframe.
View 6 Replies
View Related
Feb 24, 2014
Everytime I set the fill/stroke color of objects in a file to 75, 68,67, 90 it resets it to 0, 0, 0, 100. It isn't consistent though... some objects accept the color.
View 5 Replies
View Related
Jul 25, 2013
I have created a color gradient and the color fill has an uneven edge, which creates a small white space between the edges of the fill and the bounding box. I have tried using shift+click to try and even the edges, but I guess that only works for using stroke tool or whatever. You have to look closely because this image is not very large. There is a slight uneveness on both the top (near the right side) and bottom (slightly left of center).
View 14 Replies
View Related
Aug 8, 2013
Select same fill color with java script and stroke color tool.
View 1 Replies
View Related
Oct 9, 2012
I have a vector map of the United States that I am currently trying to shade in for the election. I would like to achieve an effect similar to that shown here with the lines going through the red and blue states - [URL] How would I go about doing that? I'm a novice at Illustrator and only know the basics of filling with solid colors. I have CS6 if that makes a difference.
View 2 Replies
View Related
Mar 11, 2013
I have a script that will select text Frames, but I have come into a situation where I need to exclude any text frames that do not have a fill color. I do not see a filled Boolean property for character attributes or text Frames.
This is what I used to select all text on all visible and unlocked layers. I dont see a way to exclude textframes that have no fillcolor.
if (app.documents.length > 0 ) {
var doc = app.activeDocument;
var numTextFrames = 0;
for ( i = 0; i < doc.textFrames.length; i++ ) {
try {
textArtRange = doc.textFrames[i];
textArtRange.selected = true;
} catch (e) {} } }
View 6 Replies
View Related
Sep 26, 2013
How do I change the default fill color palette in Illustrator CS6? Specifically, I am opening a a new brochure template and the fill and stroke boxes on the left side of the control panel just open with the "no fill" red slash box and the registration mark "bullseye". I would like to have the default color palette load as if it were a new document.
View 7 Replies
View Related
Feb 20, 2012
I am using Inventor 2012. I have a horizontal feature that terminates at a vertical plane on one end and an angled plane at the other end. I want to pattern it down but when I use Adjust, the patterned features do not adjust to the angled plane. They just go strait down from the first feature.
Does Adjust only work if the terminator is a solid surface instead of a plane?
View 1 Replies
View Related
Oct 7, 2013
Using Acad LT 2014, is there a way to adjust the scale of a gradient hatch?
Like the distance between one gradient and the next?I see several property adjustments I can make, but not the scale of the gradient.
View 5 Replies
View Related
Apr 24, 2013
I am wondering if there is a way to use the "select same fill color" and/or "stroke color" for just a group of objects in a document as opposed to document-wide.
View 6 Replies
View Related
Dec 14, 2012
I create gradients all the time and i'm wondering if there's a quick way to create a gradient based on the current selected object's fill color. For example: I have selected a box with a fill color of BLUE. I go to the gradient panel and see that what the gradient will be if I click on it (that is usally based on a default gradient WHITE to BLACK, or it comes from the most recent gradiented object I touched). So I click on it and the gradient is activated with the stops being not BLUE. What i want is... if i select a box with a BLUE fill and click on gradient - it will create a gradient with both stops being the same BLUE as the fill color. This would be very convenient because instead of clicking on each stop, shift-eyedropping the the blue color from a duplicated box, it would instantly start with the blue-blue gradient for me to tweak (in the case below for a button i would make the higher stop lighter and lower stop darker).
It's somewhat useful to select an object with a gradient to "copy" that gradient, select a new object, click on the gradient panel and have this new object take on that exact gradient. But most of the time i'm not copying gradients but i'm creating new ones, and it makes more sense for me to create a gradient derived from the fill color.
View 14 Replies
View Related
Jan 6, 2013
Is it possible to change the black fill color on an image that has been traced using the silhouette option?
View 2 Replies
View Related
Dec 26, 2013
I am a bit of a newbie to illustrator cs6. I have been using the image trace function so that I can edit my hand drawn pictures. I 'Place' the scan of my drawing and then go to Object>Image Trace>Make and Expand. The problem I have is when I want to join two lines together to close the shape (as below).
I have tried simply dragging the anchor points and reshaping the line so it appeared to be closed, I have tried closing it with the pen tool and I have tried to 'path>join' them but this box comes up.
I want to be able to fill my image traces with colour easily, can this be done?
View 8 Replies
View Related
