I've used the Fill>Pattern to tile my seamless patterns tons of times and never had this issue. Suddenly , it started making each tile on the large canvas a different color when I apply Fill>Pattern. At first I thought it was a tip or guide to see the repeat edges , but it shows up in print preview too. What did I do and how do I correct it?
View 4 RepliesI have a 512x512 pattern I need to fill a 2560x2560 area that should go 5x5...
Do I have to paste it manually, or is there a way to get the pattern fill to actually tile properly? It's not.
Using V2.8.2
I'd like to apply a pattern above a color fill, at the moment I apply the color fill, then I convert it to a smart object and apply the pattern, this because if I apply pattern and color fill, the color fill goes above the pattern covering it.
There is a way for skip this procedure and apply the pattern above without smart objects?
Is there a way to adjust the color of a pattern fill without changing the actual pattern?
Sometimes I do this by overlaying another solid color fill on top of the pattern fill, and use multiply or other blend modes. This works except when the pattern contains empty/transparent areas: in this case the solid color would pass through and affect the object below the pattern, which is unwanted.
So basically, is there a way to isolate the color change to a single object? I've tried with "Isolate Blending" and "Knockout Group" with no success...
I want to tile this as a pattern, if I follow the traditional off-set routine I will destroy the clean pattern as so commonly found on pages such as; this.
View 19 Replies View Relatedi`m looking on my hardrive for the original seamless tile I used to create a pattern style but cannot figure out how to find it.
View 5 Replies View RelatedI need to create a hatch pattern for a flooring tile that we have currently starting using and I am having real issues getting it to work!! The pattern is meant to be tiles set in a brick type style but with a rolling offset, but the tiles are different sizes - I have one row of 300x600, then a second row of 148 x 600, then another row of 300x600, then another 300x600, then a row of 148x 600, followed by another 148x600. This is the pattern end and needs to repeat itself. I have attached a line drawing of what it needs to look like.
I can get a very basic line drawing showing 300mm and 148mm for the first two lines but then it all goes wrong!
My application has suddenly started to link the hatch pattern to the area boundaries.
The objects remain on their own layers, but I am not able to delete the hatch pattern without deleting the boundaries.
I cannot edit the hatch pattern either as the application no longer recognises the hatch pattern.
Have i changed a setting unwittingly?
see xcf attachment...
I used a heart fill pattern of the right 75% of the picture and the left 75% of the picture is selected overlapping the first fill in the background... I want to fill the selected background area with a flame fill pattern where it overlaps the selected portion of the heart pattern as well as the transparent area... 'overlay' looks better but Gimp is FAILING to fill the transparent areas, it ONLY fills the overlapped heart pattern portion of the selected content!!! I even tried filling the transparent area with 'white' then filling the selected area, but it STILL ONLY wants to overlay fill the heart pattern, it STILL leaves the rest alone!!! it doesn't matter if the background is white or transparent, it leaves that alone and ONLY fills the heart pattern area of selected portion of the image!!!
I have created polka dots or even more complicated pattern in previous version illustrator. They are perfect. When i migrated to the CS5, the exactly same pattern always have a fine line in between the pattern swatches. After i export the artwork to jpg in 300dpi, they are still there.
View 16 Replies View RelatedI'm trying to make a repeat pattern tile (using CS5 on Windows 7), but when I crop the pattern, the expanded paths underneath become visible as on the flowers.This is what I did after creating the artwork:
Used the rectangle tool to make a box with fill/stroke directly on top of the artboard.. Select all > Expand (selecting stroke only, not fill) Deselect the cropping box and grouped the remaining objects. Reselected the cropping box and grouped all objects Pathfinder > Crop I'm guessing it may have something to do with the fact I used a gradient on the flowers but how to resolve it.
How do I get it so that when I draw a shape it will fill with color? In my options bar there is a rectangle with color where I can choose that, but sometimes that's not up. How do I pull it up?
How do I fill a canvas with color without having to cover it with a large rectangle to fill? I've gotten answers to this but none has solved the problem.
When i do a normal Fill with Pattern the pattern is the right colour, image (1)But if i select Scripted Patterns Image (2) it always comes out with random colours.
View 5 Replies View RelatedI was browsing some templates the other day, and really liked the effect presented in this design.
How do you develop this dotted type of overlay/pattern in Photoshop-?
i'm using PS CS and I want to fill a selection with a pattern but i'd like to simulate a light source.. so i'd like the pattern to fill with a varying density -- like stippling..or cross-hatching. i'm doing a 2-color (black and white only) t-shirt design so i can't have any gradations of colour. this may be a loaded question.. so i'm just hoping to get pointed in the right direction. if u need me to be more specific let me know.
Would illustrator be better suited for this task because i also have access to ai cs. even if not.. can someone recommend a good illustrator forum that is comparable to this mb? and maybe for Flash too.
quick and efficient way to make a giraffe pattern in photoshop?
I've drawn a giraffe, but drawing each individual spot will take ages in Illustrator. So I thought, maybe I can use photoshop's mosaic filter, but I'm not sure how.
In Corel PhotoPaint X5, changing the fill color was possible by e.g. double clicking the (left-most) color square, then hitting Edit. Already, I found this was a bit too many clicks. Now in Corel PhotoPaint X6 it's gotten worse -- after hitting Edit, I'm not in the left-most tab "Models", but in the right tab "Palettes"!
My question: Is there any way I can open the Uniform Fill dialog with one click? (The Color Docker doesn't have a big color preview field so it doesn't work well for me when selecting and changing a color.) And is there any chance Corel will fix the bug with the wrong tab being opened?
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
What I'm wanting to do is be able to draw a vector object and use it as a pattern fill.
I need to be able to node edit the created pattern. I'd also like (the option) to be able to scale the destination object, and the pattern scales with it.
I figure it be much easier to use/create a fill pattern then duplicate all day long. Now (as example) there is the built-in "Star Shapes" pattern which is a black filled star.
I need to be able to change that to a a red hairline stroke, no fill pattern as example.
I am very new to Corel Draw x5 and am having difficulties using a full color patter fill for text. Everything looks good until I actually fill the text outline with a vector pattern. At that point the edges of my pattern become jagged, and as yet, I haven't been able to figure out how to smooth things out again.
View 7 Replies View RelatedI know how to create a new fill pattern, BUT, whenever I use a created pattern to fill an object, I get weird lines in it - as though the fill ends then starts again. It's as though the cross that you use when creating the fill is imprinted on the pattern.
View 6 Replies View RelatedI'm working up a new logo and discovering that I like the old styles best (makes sense, being so ancient myself). Here's a two-color pattern applied to lettering, with the Advanced options box open next to it:
I've highlighted the "Row or column offset." Try to change one without the other--won't do it. They change in tandem: change one and the other matches it. Why call it row or column when it's row and column? For that matter, why the radio buttons?
where I can get a sunset sky gimp fill pattern?
View 2 Replies View RelatedWhere I need to go to change the scale of a fill pattern. I have brick walls that the brick facade scales about 1/2 of what it should be.
View 1 Replies View RelatedI'm trying to remove a fill pattern I added to an image but I've since saved and closed the original so I can't simply undo it. I'll attach a copy of the image but in short it is a simple polygonal map of the world, I filled the continents in with a simple checkered pattern and would like to remove it so they are all blank.
View 2 Replies View RelatedIs there a way that the background fill of a pattern can fill the whole pattern so that there aren't gaps like the above picture? So that it woudn't matter if you expanded the border there would always be a solid fill background?
View 4 Replies View RelatedI took a photo of the sunrise. The sun was very "red" from forest fire smoke. But when I looked at the photo later the sun had lost its "red" (due to the brightness of the sun). restore the sun color as I saw it?
Below is the photo I want changed and the next photo (not mine) is approx. the color I saw the sun as (perhaps a little redder). I want "my" sun filled with that color.
I want to make some letters and fill them with a background pattern like rainbow.
all the fonts are solid black so I need to know how to hollow them out so the background fill will show, then have to cut out all the letters to get the background around them removed so I have only the letters filled with rainbow that can then be moved around and overlaid like with the gray checkerboard squares thing happening.
Like this: imagine a rainbow backing picture with " I heart Mom" text overlaid, fill the " I heart Mom" with rainbow then get rid of the rest of the rainbow backing that is OUTSIDE the letters. The word heart will be replaced with a heart shape.
I would like to create a diagram like below and want to fill pattern similar to this.
View 8 Replies View Relatedif I have a group of areas that I want filled... I can select uniform, fountain, and postscript... but why doesn't pattern work for a group? This would be useful and seems like a bug. Why would I have to apply the fill to each part of the group? Groups are supposed to be useful for manipulating multiple objects in this way.
View 9 Replies View RelatedNormal
0
false
false
false
MicrosoftInternetExplorer4
I've manually edited my "tiles.ini" file, but the bitmap pattern files I've listed are not loading. Coreldraw is not seeing/recognizing my changes.
Here is the format:
; Please do not remove! This line is required by Winnt4.[Tiles]nTiles=191defaultTile=00=BlackQuartz.cpt1=WOOD27M.cpt 2=almonds_1.cpt
File location is:
C:Program FilesCorelCorelDRAW Graphics Suite X5Custom DataTiles