I have created polka dots or even more complicated pattern in previous version illustrator. They are perfect. When i migrated to the CS5, the exactly same pattern always have a fine line in between the pattern swatches. After i export the artwork to jpg in 300dpi, they are still there.
View 16 RepliesI want to tile this as a pattern, if I follow the traditional off-set routine I will destroy the clean pattern as so commonly found on pages such as; this.
View 19 Replies View RelatedI played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View RelatedI am trying to create a seamless pattern brush in CS6 .When I use the no fill/no stroke bounding box placed behind the object to define the repeat, instead of cropping the object for the brush, it overlaps it. Here is an example:
When I do this in CS5- the bounding box works fine and crops out the space outside. Was there an update in CS6?
When making a pattern into a swatch and applying it to letters, I am noticing that you can see an abrupt point where the pattern stops and repeats. How can this be done so it is not visible?
View 2 Replies View RelatedIn Illustrator CS4. I want to create a repeating pattern, using a swatch. I've done this before succesfully but not sure why this one isn't working as planned.
The small image at the bottom (just the area inside the artboard) is the spacing I want between the characters, but the pattern at the top is what I get.
I can't figure out how to create outlines (vector lines) for my patterns , as I need to laser cut the pattern, and all the lines have to be seen I use Illustrator CS6.
View 3 Replies View RelatedI'm trying to create a seamless pattern in CS6. Before I had CS6 I didn't have this issue.
So, I have my 1500 x 1500 pixel document.I have set up the new pattern design in the center that I created.I go to Filter/Offset - wrap around and choose 750 px for both the vertical and horizontal.I fill in the spots, not touching or going to the edges to create the rest of my patterned tile.Define pattern.Then, go to fill a new larger document with the pattern and the offset is not seamless. See attached.
I have not encountered this problem before and have made lots of patterns this way. I do realize I can do this in Illustrator, but my client needs a PS file.
I have just got my web page backgrounds from various sites across the net. Now I need to make my own as the background I need cannot be found.
how to make tilable images that are seamless? A very long time ago, I had a program that would paint on one side as I paited on the other (making the image tile seamlessly). However I do not remember the name of the program and was hoping that PS will do it.
Just need to create this as a background tile for a web page for a site that is for a rock climbing photographer friend of mine.
Should be easy enough but I just cannot get a really good looking effect.
To be honest any kind of 'stone' effect will do, it just has to look good and not like sandpaper.
We struggle a bit creating a seamless repeating pattern that includes embedded images with clipping masks applied.Our pattern is a 550x550mm black square with various embedded inserted on top. All of these images have Clipping Masks applied to hide unwanted areas.These images are placed so they create a seamless repeating pattern and this includes areas that overlap the square.Once we create a swatch from this pattern the repeatable area becomes too big as it includes the unwanted areas hidden by the clipping masks.Because the repeatable area is now too big it's actually not repeatable.
Pathfinder/crop to delete the unwanted areas in the images etc.We though of just live tracing the images, but due to the complexity this is not an option.Do we really have to do our "cutting" in Photoshop .
How can I create a tileable line pattern like the one on the image? (Illustrator CS5)
Is there a more practical way than drawing and duplicating lines? When I do that, and fill a shape with the pattern, I see gaps between tiles. Do you remember the same pattern on Microsoft Word? I want to create that, on Illustrator. Which method should I follow?
I'm on the brink of insanity with creating my diagonal line pattern. I've tried everything I can think of but the pattern is an absolute mess! I want to create a diagonal line pattern but I want the lines not to be uniform. Basically I've made a group of 3 lines and then one separate line on its own, then to repeat this as the picture below. I've used the distribute function so the distances between the lines is identical everywhere. I've then rotated the whole thing exactly 45 degrees and aligned the lines to fit the bounding box in the "make pattern" mode as shown. Yet the resulting pattern is just a mess of overlap ugliness. All I want is for the pattern to literally look as it does in the image on the left, how to sucessfully do this in CS6?
View 6 Replies View RelatedI'm using photoshop cs6 to create textile designs, and occassionally, (it hasnt happened with every tile) when i change the image size of my tile e.g. from 15cm sq to 10cm sq, then try to repeat the tile it forms thin lines between the tiles?
heres the tile repeated after ive changed the image size and you can see the thin lines...when i zoom in on the tile edges where the line has formed it looks like this....almost as if theres empty pixels that can then be coloured in.
i dont think its a problem when creating the tile because before i changed the image size it repeated fine with no lines, its something thats happeneing when the image size is altered.
I wanted to save a pattern swatch and not the whole swatch library so I deleted all the swatches until it was just the one pattern swatch. I saved it as an .ase and then opened it in another document. I noticed however that when I open the pattern in the other document it shows the default swatch library and no pattern swatch. When I save the swatch as an ai. it opens the default library as well as the pattern swatch. Is there a way to save just the pattern swatch?
View 1 Replies View RelatedI'm trying to make a repeat pattern tile (using CS5 on Windows 7), but when I crop the pattern, the expanded paths underneath become visible as on the flowers.This is what I did after creating the artwork:
Used the rectangle tool to make a box with fill/stroke directly on top of the artboard.. Select all > Expand (selecting stroke only, not fill) Deselect the cropping box and grouped the remaining objects. Reselected the cropping box and grouped all objects Pathfinder > Crop I'm guessing it may have something to do with the fact I used a gradient on the flowers but how to resolve it.
I am trying to work out how to rotate a pattern swatch without that rotation affecting all the other pattern swatches on my palette. I don't want the rotation to apply to just one instance of fill, I want to edit the actual swatch so that whenever it is used in the future, that rotation is applied.
I have tried the obvious - eg going to object, transform, pattern only... and it works, but it also rotates all my other swatches; and I can't work out if it's rotating it for just that object or if it's actually updating the pattern swatch orientation.
Additionally some comprehensive tutorials on making patterns using the updated CS6 software - everything I've found so far just raises further questions for me. I'm talking about, for example, being able to change the width or rotation of a stripe within a pattern and have it still tile seamlessly.
I'm using CS6 on a PC.
It may be the way I'm using this feature and I've just missed it - it appears to me that you can't have a solid background to your swatch because the way it stacks/overlaps elements means that you will end up cropping some elements on some sides.
Try it just by putting a solid shape the exact size of the tile.
I was wondering if there was any good recommended tutorials or good readings on how to make patterns(seamless) in illustrator for use on other designs?
View 8 Replies View RelatedI really want to make a small honeycomb swatch pattern (the polygons should be small - 2 px x 2px) , but I just cannot get it to work. What I did is make one small polygon, and went to: Object>pattern>make and applied the following settings:
You will see that on the shoulder of the t-shirt, the pattern is kinda trasparent - the bottom layer is visible-I don't want it to be.The bottom pattern(on the side of the t-shirt) you will see came out fine, except that the polygons are too big and I cannot get it any smaller.
When creating patterns with for example very easy dimensions like the artboard 400 x 400 px etc, and everything right placed, as you can see on the print screens, after having created the pattern, it never aligns center-aligned like I would like it too.
Left: the original positioning before creating the pattern. Right: the result of a perfect square, center aligned to the artboard and with the swatch applied, not too pretty he?
New to Illustrator. I cannot seem to keep my new pattern designs in my swatch panel. It isn't there when I open a new document.
Do the new patterns have to be saved in a file for later use? Using CS6 and on a MAC Pro
I want to alter the colors of my pattern. Typically, I pull it from the palette to the artboard, change my colors.. re-select the entire patterns repeat and drag and drop it back into the swatches palette. None of my layers are locked and all are visible. What's the deal? (iMac CS2) (I have loaded up other files with patterns in them and it works just fine!) (I have also quit .AI and reloaded the same file with the same problem.)
View 9 Replies View RelatedI recently created a script that reads the layer names of an Illustrator file, and uses the name to identify a swatch to use to pattern all elements on that specified layer. The script works well, and is a real time saver for our mapping staff, but it requires duplicate swatches to exist, where the only difference is their colour.
To improve the script I want to duplicate a swatch and modify its' colour before applying it to a specific layer. I think the only way this can be done is via the "placedItems" command. So the code I'm trying to write looks likke this:
for(var s=0; s<slib.length; s++){ // search swatch library
var pat=slib[s].name; // get swatch name
[Code]...
However I'm struggling to find the correct syntax to make this work.
I have some 2 coluor artwork consisting of 2 x pantone colours purple and grey.
Within the artwork is a stripe pattern swatch consisting of the same colours. On screen the colours are fine and I've checked all the colour settings and these are fine too.
Why however when i print the artwork does the pattern print in a different colour?
I have an AI file containing seamless pattern swatches.I'd like to get each swatch vectors (ie : access the swatch groupItem). It's doable when clicking on the swatch panel and dragging the swatch on the document, or even double clicking the swatch in the swatches panel, I'd like to do it with javascript.
how to access swatch patterns properties.
How to access the swatch properties, like when double clicking on the swatch in the swatches panel, how to "simulate" a drag & drop of the swatch to the document, I'll take it too, though I think it is not the most convenient way to do.
I was wondering if there is some equivalent in Smoke to Final Cut's flicker filter, which I use frequently to eliminate flicker and 'buzzing' caused by fine lines, especially evident when HD is down converted to PAL for broadcast?
View 1 Replies View RelatedAs I've done with so many other actions before, I am using Insert Menu Item. But when I choose Window>Arrange>Tile, it doesn't fill in that item. I've tried typing "tile" in the Insert Menu Item dialog, and clicking Find, but that results in Effect> Texture> Mosaic Tiles. Which is not the item I want
Why can't I choose Window>Arrange> Tile? Or, is there a workaround?
when I select a swatch for an object the default was to apply it to the fill color. I don't know why but it started applying a swatch when selected to the outline/stroke instead. How can I change the default application of swatches back to the fill color?
View 4 Replies View Relatedwe have a website concept in Illustrator CS3, with named swatches for all colors. I'm wondering if there is an easy or 'semi-automated' way to generate a chart of the swatches we are using, showing there hex values?
I know I could draw out a bunch of boxes, fill them with the swatch colors, and manually look up and type in the hex values for each. But this would take a LONG time, as there are a number of color variations.
Whenever I try to create a new CMYK color swatch it automatically opens pattern swatch name panel. Why won't it let me create a color swatch?
View 4 Replies View Related