Illustrator :: Saving 300 Dpi JPG 1920 X 1080 To 8000x4500?
Jun 24, 2013
(what i've been using is photoshop) and my problem is that I want to save a jpg file, so I create a document at 1920x1080 pixels at 300 dpi and once finished I go to the option of export and set it to 300 dpi and it saves it at 8000x4500? when I set it to 72 dpi there is no problem and saves at 1920x1080, but I want it at 300 dpi and not such a big file that sometimes it doesn't even have enough memory to save.
I have started a new video project with a resolution of 1920 x 1080 in Photoshop CS6with a pixel aspect ratio set to square.. In the project I add a video to the timeline. The source video was created in QuickTime and exported at a 1920 x 1080 resolution MOV file. I have check both the source clip at the canvas siye and have confirmed that both are 1920 x 1080. However, when I import the video it takes up less than the entire frame. It appears that the video is being scaled down so that there is some white space to the right and below the video clip. See the image below.
In the past I have been able to import 1920x1080 video to a 1920x1080 project without a problem. I have 4 or 5 examples that have worked well.
I have some fotos that are apparently too small for the 1920 x 1080 format of my film.
What do I need to master about the relationship between three items (canvas size, image size, and document size) so that I can smoothly resize a bunch of images in Photoshop for export into Premiere Pro in that 1920 x 1080 format?
I will be constraining my proportions... if the images are too big, I will do a Ken Burns "zoom out" effect in the film.
I want to change a 1920-1080 p background, into a 1920 - 1200 background.
I don't want to re-size it or lose image quality, the background for this can be easily replicated through some simple editing (drawing strait lines with the paint brush tool, and basically filling in to expand the background) Is there a way to do this? Here is the picture I want to change:
[URL].....
I just want it so that the pin-wheel design extends outward as to make the entire image 1920-1200, rather then the 1920-1080 it is now. (without losing image quality of the center wheel.)
"VideoStudio® Pro X5 also supports the frame rates found in newer HD camcorders, so you can edit in 50 or 60fps mode, which is ideal for higher quality and slow motion sports effects in footage."
I use my 3 years old Panasonic HDC-TM300 (released in 2009) camera in 1080/50i (17Mbps) mode and I'm planning to upgrade it to one of the newest models HC-X900M/HC-X900/HC-X800 just released in 2012.
These brand new cameras can be used in 1080/50p mode (28Mbps) which results in beautiful footage and their Image Stabilization is almost perfect. Previous models like HDC-TM700 (released in 2010) or HDC-TM900 (released in 2011) are also able to shoot in 1080/50p by the way.
Somehow the video editor software manufacturers are in a big delay however I know that 1080/50p (AVCHD Version 2.0) was standardized only in July 2011.
My question is the following: is it possible with X5 to edit 1080/50p .mts video files then to export them into the same 1080/50p .mts format without any downgrading?
The only modification is just the editing work should be.
Editing and exporting are two different things, but this is the key issue.
Other vendors claim that their product (eg. AVID, Vegas Pro 10) is able to edit 1080/50p but nobody mentions whether is it also possible to export these edited videos into the original .mts 1080/50p format or not?
PS: if it is not possible then the 1080/50p is useless due to the necessary quality decreasing! maybe this is the reason why the camera producers still keep in their brand new models the "good old" 1080/50i mode...,but what is the technical reason of missing this 1080/50p .mts output format, only the delay in software development?
I just installed VS X3 and I'm very impressed with the improved AVCHD editing capabilities. Unfortunately, I'm having a problem with the output. When I import a single AVCHD 1920 clip from my Canon HF100 to my VS X3 project, perform a simple trimming operation, and then save back to the same format as the original clip (no re-rendering), the output file is virtually unplayable. It will usually start playing okay, but after 5-10 seconds start stuttering and even stop playing altogether for 10-15 seconds at a time. I've tried several different players. This problem affects ONLY the output from VS X3. The original footage in the same format plays just fine in any player.
I reverted back to VS X2, tried the same operation with the same clip, and the output is just fine. This must not be a widespread problem, because I searched the forum briefly and couldn't find similar reports. I can continue using VS X2 for the time being, but I really wish I could take advantage of the editing improvements in X3.
I upgraded to X3 and it will happily load 1920 x 1080 @ 50p x264/AVC files from a Pan HDC-HS700 just fine (and reports the details correctly but as PAL HDMV). As I play these back in native form on my HTPC (and they look stunning) I just want to EDIT them, then smart render them out in the same format.
This is where I seem to come unstuck, as if I choose "Create Video FIle --> Same as First Video Clip", X3 wants to pump it out as PAL, MPEG 720 x 576 @25fps! I can also not find or create a template that matches the specs of the format.
So 1) Can X3 handle 1920 x 1080 @ 50p x264/AVC out of the box 2) Is there a "tweak" like old versions where you can expose additional CODEC settings to handle 1920 x 1080 @ 50p x264/AVC 3) ....if not what alternative software does work with 1920 x 1080 @ 50p x264/AVC (as Pana's bundled HD Writer is very limited)
I am having issues converting AVCHD Video (.MTS) videos to WMV HD 1080 30p. (16x9) When I try to use this default option the final result never comes out 16x9 widescreen. The original is 16x9 widescreen. (In the settings tab it is checked to be 16x9).Now if I use the WMV HD 720p, it will be 16x9 widescreen (using same original video).
I am pretty sure this did work fine when I first installed this software, but something has changed...and I know I have not touched any settings at all.
Normally i do camera work and edit in Pre, Ae with all the trimmings. I recently got into 3d work with the plugin that video copilot provides and now that my colleague is on holiday i'd figure i'd play around with his 3dmax and plugins. So i made an explosion in FumeFX and in itself it works fine but the "Kaboom" needs to move towards the viewers at home. This works but the smoke loses its sharpness as it progresses towards the camera.
What do i need to do here? In AE i can adjust the DOF of the camera layer and also the aperture. i'm not finding this in 3dsmax. I have positioned the camera within the area of the explosion and it should be inside the bounding box but i'm not sure. I used the standard track camera with the little target box. Didnt change a thing to the default settings.
[URL]
I'm gonne try and cheat by exporting it twice as big as normal HD and the scaling it down.
I am on the final stages of finishing my first ever HD project, having made the jump Premiere Pro 2.0 to Premiere CS5. Mid-way thru I found it necessary to upgrade to Creative Cloud, so that is where I am working now. The HD world is so vastly different from the old SD flow that every single step of this project has been a huge learning curve for me. I am basically an 'oldie' but for all practical purposes I am a total 'newbie' at this. That said, I am now finding myself ready to export my project to DVD in a SD form with Stereo sound.
I am working with footage shot on the Red Epic. At my current stage I am working withh ProRes 444 renders from which I have created a full nested 74 minute timeline. Frame rate is 23.976 and the source is1920x1080 with 1.0 square pixels.
So now my movie is done, and it looks and sounds like I want it to. The question now, in a nutshell, is what file type and settings should I use to export my movie so that I can retain aspect ratio? Should I output a movie first or take the project into another program like encore first and make my disc from there?
Also, I have my first screening coming up (primarily for cast and crew and industry insiders) in a couple of weeks, so I need to create a 1080 HD File with my 5.1 surround track that I project from a laptop. The screening venue has the capability to do that via a simple HDMI cable hookup, but does the laptop I use need to have any special capabilities to do the job? And what is the best file type to use for that?
I have always been more of an artist than a tech head, but I am pretty much doing the whole post on this movie alone, with the exception of the Dissolve renders and the sound design, which I had done for me (I have a great finished 5.1 design in .wav format, as well as a stereo version).
I should also mention that I currently have Encore CS5. Can I work with this on a Premiere CC project?
Are the bigger 1080 files harder to work with or slower than 720? I have a Panasonic camera that takes 720 video and VideoStudio 4 seems to handle them pretty well.
I might be getting a Canon that can do 1080 for my upcoming honeymoon. Since DVDs go back down to 480i or whatever, does shooting in 1080 really add anything quality-wise when converting to back down to 480 DVD?
I don't have a blu-ray maker on my machine, but maybe someday so don't know if should shoot videos in 1080 or 720. So should I shoot 1080 just in case? Are the files a lot bigger?
I have just upgraded to VideoStudio Pro 5 (from 4) as 1080/50p editing is now available in the upgrade; I shoot my source footage on a Panasonic HS900. Whilst I will edit my footage at 50p I cannot, of course, create a video file to burn to a BD without losing image quality, with Blu Ray only accepting a 24 fps frame rate. I understand after editing my footage in 50p I will then need to re-encode the video file to back to 24 fps if I am to maintain full '1080' quality and I'm wondering which of the 'drop-down' video file templates I should be using to achieve this?
I cannot seem to find anything in FAQ that exactly 'hits the spot'.
All my clips are 1440 x 1080 but, for some reason, the Project Properties are 720 x 576.Don't see that as any problem providing I can select the higher quality settings when I go to create a Video File. And that's where the problem begins.If I go Share/Create Video File/Custom I can see the properties in the Save Options box are 720 x 576 and I can't change them.I've tried clicking on Options and looking under the Compression tab but my only options there are PAL DVD or NTSC DVD. I can't find any option that will let me get the file back to the original properties of 1440 x 1080.I'm NOT trying to create a DVD - just a high quality file that I can play back on my computer and on my HD TV.
When you're in source-sequence mode and push "f15" key (that is "player view mode" shortcut) several times, you can switch between different view modes. One in particular kept my attention: you can output a video frame with 3840x1080 resolution (double full hd), composed by primary output (on the left) and secondary output (on the right).
The strange thing is that these two video streams (primary and secondary) are not in sync: in fact secondary one is always delayed by one frame.
What is the purpose of this view mode? Is it possible to sync primary and secondary output in this particular mode? It would be great, because this way we could finally output stereoscopic 3D in side-by-side mode!
I'm struggling to create a 1440 x 1080 mpeg 2 video file with a variable data rate.
The original HD footage is 1440 x 1080 but I can't find this option when I try to create a video file from my project. I am sure that I had many more options when rendering a video file in X2.
If I try using Create Video File/Same as Project Settings I can only get a 720 x 576 file. If I try using Create Video File/Same as First Video Clip it looks like it's doing the job but I think I'm getting a file with a fixed data rate of 25,000 kbps which is too much for playback on my Western Digital TV gizmo (whereas a variable data rate of 25,000 kbps would play okay). If I try Create Video File/Custom I can only get what I want by switching from mpeg2 to MPEG Transport-Stream Files (whatever they may be) but when I try playback on my Western Digital TV player I get the message "no audio channel" although the image is very good.
So how can I get a Video File the same as my original footage but with a variable data rate?
2 days on GIMP. I need to adjust the clone tool so it's 1080 pixels vertical and about 20 pixels wide. I googled and searched, but I can't seem to find the right phrasing.
When I try to save a pdf from Illustrator, it crashes. I have CS5. It doesn't matter which settings I choose in the dialog box, it always shuts down illustrator and says Adobe Illustrator has stopped working....
I became a member of Adobe Creative Cloud a few days ago. Today I started working in Illustrator CC, but it really bothers me that everytime I save my doccument it crashes.Well, at least, it says that it crashes, but if I wait a couple of minutes it works again and it saved my procress.
Also when I close the program and open it again, it already crashes before I have done anything.
I am working on a Windows 7 computer, and with Illustrator CS6 I didn't had this problem at all.
I am trying to save as a psd file from illustrator to imoprt it into photshop and take it from there. I have made more than 100 layers and when i try to save as 300 dpi keeping and the layers as well given an option from the dialogue box.
I get a error message not enough memory to save the file. Why does it not save? My laptop has enough memory for another 4 pcs.
The files i'm saving for web so i can get them in jpg (or gif) format are coming out very pixelated. this is when i print the image.
what is the best way to save for web an image and keep the resolution good.
using for a business card template. Every template will let me attach images i want to the project. to do this.. i "get file from computer" and it drops the image in but real small... then you are supposed to enlarge it onto your work however you want. well when i enlarge this image file, it gets pixelated badly. I'm thinking it's the way i'm saving it. i do not adjust anything when i save. maybe i should.
this is what avery template notes about the images i am allowed to use - When uploading the image, the maximum size allowed is 4 MB. You can only upload JPG and PNG images either as RGB or CMYK.
I'm trying to upload shirt designs to jakprints and I'm using the template they provided to design the shirt. Hoever, when I save the file, only my design is left. No template.
So a few times now I have gone to save a document and illustrator cs6 64 bit crashes. It doesn't outright close, but it stops responding to windows and all of the pallate windows and main window begin to flash black and then back to regular.
I run windows 8 on this computer and am worried that it just incompatible for the os. So I have begun to run the program in windows 7 compatability mode. For the last 20 minutes it hasn't crashed out, but I've only saved two documents and this error has only happend three times in a month of using the application, though two of those times were within an hour of each other today.
I'm not 100% certain but I believe that each file it has happend on is also one that I had just saved for web.I found as much of a crash log as I can in this new os but it reads as follows:
The program Illustrator.exe version 16.0.3.691 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
I'm finding that when i add a second artboard to an existing ai, then save and close, it has disappeared on reopening.
I have both pieces of artwork (one for each page), but 1 of the artboards will have disappeared. Irritatingly the remaining artboard sits between the 2 pieces of artwork - in the wrong position for both!!!
I am running a fully licensed pro version of Illustrator CS6 on two machines. They both now crash (freeze) when saving EPS. Fine on PDF, Ai, etc... just EPS on both machines. No error messages, just a freeze then a force quite.
Both machines are 27in iMacs, under one year old, latest versions of Mountain Lion, all top notch and running on i7 & i5 processors. Spec is not the problem. All software is updated.
Really at a loose end. Reinstalled the software on one machine, OK at first, then back to crashing.
AI6 is very slow on some saves. Nothing fancy with this file. No gradients, no clipping masks, no placed images, simply color line art. I run a Mac Pro with 16Gb ram and Tb raid drives . I've had this problem with a few other files and I think in CS5.
I have a problem with Illustrator CS6.When I try to save in .ai or other format, I have a Windows error message like "Illustrator has stopped working".And Illustrator close it.
