VideoStudio :: 1080 Versus 720 Video In Version 4 Or 5?
May 30, 2012
Are the bigger 1080 files harder to work with or slower than 720? I have a Panasonic camera that takes 720 video and VideoStudio 4 seems to handle them pretty well.
I might be getting a Canon that can do 1080 for my upcoming honeymoon. Since DVDs go back down to 480i or whatever, does shooting in 1080 really add anything quality-wise when converting to back down to 480 DVD?
I don't have a blu-ray maker on my machine, but maybe someday so don't know if should shoot videos in 1080 or 720. So should I shoot 1080 just in case? Are the files a lot bigger?
View 3 Replies
ADVERTISEMENT
Nov 1, 2010
how can i get the full hd 1080 option for youtube on vs3
i have a full 1080i camera and yet when i want to upload this hd version to you tube it only offers up to 720 in vs3
View 1 Replies
View Related
Nov 20, 2012
I have started a new video project with a resolution of 1920 x 1080 in Photoshop CS6with a pixel aspect ratio set to square.. In the project I add a video to the timeline. The source video was created in QuickTime and exported at a 1920 x 1080 resolution MOV file. I have check both the source clip at the canvas siye and have confirmed that both are 1920 x 1080. However, when I import the video it takes up less than the entire frame. It appears that the video is being scaled down so that there is some white space to the right and below the video clip. See the image below.
In the past I have been able to import 1920x1080 video to a 1920x1080 project without a problem. I have 4 or 5 examples that have worked well.
View 5 Replies
View Related
Oct 14, 2010
I upgraded to X3 and it will happily load 1920 x 1080 @ 50p x264/AVC files from a Pan HDC-HS700 just fine (and reports the details correctly but as PAL HDMV). As I play these back in native form on my HTPC (and they look stunning) I just want to EDIT them, then smart render them out in the same format.
This is where I seem to come unstuck, as if I choose "Create Video FIle --> Same as First Video Clip", X3 wants to pump it out as PAL, MPEG 720 x 576 @25fps! I can also not find or create a template that matches the specs of the format.
So
1) Can X3 handle 1920 x 1080 @ 50p x264/AVC out of the box
2) Is there a "tweak" like old versions where you can expose additional CODEC settings to handle 1920 x 1080 @ 50p x264/AVC
3) ....if not what alternative software does work with 1920 x 1080 @ 50p x264/AVC (as Pana's bundled HD Writer is very limited)
View 14 Replies
View Related
Dec 1, 2010
All my clips are 1440 x 1080 but, for some reason, the Project Properties are 720 x 576.Don't see that as any problem providing I can select the higher quality settings when I go to create a Video File. And that's where the problem begins.If I go Share/Create Video File/Custom I can see the properties in the Save Options box are 720 x 576 and I can't change them.I've tried clicking on Options and looking under the Compression tab but my only options there are PAL DVD or NTSC DVD. I can't find any option that will let me get the file back to the original properties of 1440 x 1080.I'm NOT trying to create a DVD - just a high quality file that I can play back on my computer and on my HD TV.
View 8 Replies
View Related
Apr 28, 2011
I'm struggling to create a 1440 x 1080 mpeg 2 video file with a variable data rate.
The original HD footage is 1440 x 1080 but I can't find this option when I try to create a video file from my project. I am sure that I had many more options when rendering a video file in X2.
If I try using Create Video File/Same as Project Settings I can only get a 720 x 576 file.
If I try using Create Video File/Same as First Video Clip it looks like it's doing the job but I think I'm getting a file with a fixed data rate of 25,000 kbps which is too much for playback on my Western Digital TV gizmo (whereas a variable data rate of 25,000 kbps would play okay).
If I try Create Video File/Custom I can only get what I want by switching from mpeg2 to MPEG Transport-Stream Files (whatever they may be) but when I try playback on my Western Digital TV player I get the message "no audio channel" although the image is very good.
So how can I get a Video File the same as my original footage but with a variable data rate?
View 8 Replies
View Related
Mar 23, 2012
Here is an extract from the Corel web site:
"VideoStudio® Pro X5 also supports the frame rates found in newer HD camcorders, so you can edit in 50 or 60fps mode, which is ideal for higher quality and slow motion sports effects in footage."
I use my 3 years old Panasonic HDC-TM300 (released in 2009) camera in 1080/50i (17Mbps) mode and I'm planning to upgrade it to one of the newest models HC-X900M/HC-X900/HC-X800 just released in 2012.
These brand new cameras can be used in 1080/50p mode (28Mbps) which results in beautiful footage and their Image Stabilization is almost perfect.
Previous models like HDC-TM700 (released in 2010) or HDC-TM900 (released in 2011) are also able to shoot in 1080/50p by the way.
Somehow the video editor software manufacturers are in a big delay however I know that 1080/50p (AVCHD Version 2.0) was standardized only in July 2011.
My question is the following: is it possible with X5 to edit 1080/50p .mts video files then to export them into the same 1080/50p .mts format without any downgrading?
The only modification is just the editing work should be.
Editing and exporting are two different things, but this is the key issue.
Other vendors claim that their product (eg. AVID, Vegas Pro 10) is able to edit 1080/50p but nobody mentions whether is it also possible to export these edited videos into the original .mts 1080/50p format or not?
PS: if it is not possible then the 1080/50p is useless due to the necessary quality decreasing! maybe this is the reason why the camera producers still keep in their brand new models the "good old" 1080/50i mode...,but what is the technical reason of missing this 1080/50p .mts output format, only the delay in software development?
View 8 Replies
View Related
Feb 6, 2011
when I try to preview my project, I do not get any video. I can hear the audio though. When I preview individual clips I have both audio and video.
View 7 Replies
View Related
Jan 19, 2013
I am having issues converting AVCHD Video (.MTS) videos to WMV HD 1080 30p. (16x9) When I try to use this default option the final result never comes out 16x9 widescreen. The original is 16x9 widescreen. (In the settings tab it is checked to be 16x9).Now if I use the WMV HD 720p, it will be 16x9 widescreen (using same original video).
I am pretty sure this did work fine when I first installed this software, but something has changed...and I know I have not touched any settings at all.
View 5 Replies
View Related
Jul 25, 2012
I have just upgraded to VideoStudio Pro 5 (from 4) as 1080/50p editing is now available in the upgrade; I shoot my source footage on a Panasonic HS900. Whilst I will edit my footage at 50p I cannot, of course, create a video file to burn to a BD without losing image quality, with Blu Ray only accepting a 24 fps frame rate. I understand after editing my footage in 50p I will then need to re-encode the video file to back to 24 fps if I am to maintain full '1080' quality and I'm wondering which of the 'drop-down' video file templates I should be using to achieve this?
I cannot seem to find anything in FAQ that exactly 'hits the spot'.
View 8 Replies
View Related
Feb 24, 2012
I have Adobe Design Collection (before it became CS this and that...)
eg Photoshop 7
Illustrator 10
InDesign 2
Acrobat 5.
I've installed Illustrator 10. Fine. It recognised the lack of Classic environment and installed. It runs ok. But Photoshop 7. It installed as per above. But when it attempts to load it hangs with the error, "An unexpected and unrecoverable problem has occurred because of a program error. Photoshop will now exit."
I have an iMac dual core Intel 3.O with 4 gigs of ram. SnowLeopard 10.6.8
View 5 Replies
View Related
Apr 27, 2013
I recently started a project to transfer all home movie media to hardisc and then to BD and/or DVD. My goal has been to transfer home movies to discs with a menu and chapters... nothing very fancy. The media includes VHS, digital 8, and probably video 8 (in-laws videos). I'm also looking at a Sony Handycam HDR-XR500 that I plan to back up to hard drive and probably disc for easier viewing. I've only just started with one VHS tape and about 25 digital 8 tapes. I essentially used the default capture settings for the VHS (NTSC DVD, 8GB, MPEG-2, 720x480, 30 frames/sec). I used the DV Quick Scan to capture all the digital 8 (microsoft AVI, 720x480, 30 frames/sec). I then started fiddling with the Create Disc under Share. This is where I've started to run into questions.
I had assumed that it would be better to start recording to BD. I've read that they have a longer shelf life than DVD although I'm happy to keep copies on hardisc. It seemed intuitive than I could fit more files on a 50 GB BD than on an 8 GB DVD. It appears I am wrong. When I test out BD and DVD recordings under Share, it seems I can't fit many more films on BD.
I had hoped to use the greater capacity of BD to store as many movies as possible and not have a large number of DVDs. Is this possible for digital 8, VHS, or the the anticipated video 8? If so, what capture settings should I use to keep reasonable quality? I suspect I'll need to recapture the original VHS at a lower bitrate which is ok. I'm looking at a box of about 40 VHS tapes from my folks that are untouched.
On a related note, I have found that I can label chapters when editing. These chapters are picked up in the Share-->Create Disc-->Add/Edit Chapter-->Auto Add Chapters, but none of the chapter labels are imported. Is there a way to do this without manually typing each label again when editing the menus?
Finally, I plan on capturing some of the video to external hardrives. If using USB 3.0, will the editing and capturing still work, or will I need to work with files on C?
View 4 Replies
View Related
Jan 3, 2011
I am planning to buy a Blu-ray burner. Is there a difference in quality between AVCHD (that I already use to produce my VS movies) and Blu-ray BDMV movies produced with VS ? Is it visible ? I have a PS3 and a 50 inch plasma.
View 1 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Feb 24, 2011
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies
View Related
Nov 29, 2012
If I am working on a timeline with my main video track, and I am using a second version for my offline reference footage (So online footage is on V1, offline footage on the V2.1 track), when I go into the Axis effect editor or CFX editor, how can I preview my offline footage as a layer so I can check alignment. For example, I may be doing a split screen effect or reposition within Axis or CFX, but I need to see my offline reference so I can have a baseline for my effects.
View 6 Replies
View Related
Apr 23, 2011
I have an Nvidia Quadro FX1500 graphics card on XP64. Getting the correct video driver for ACA is critical as we all know. I did a search of the Adesk web site and one page told me to use version 259.57, while another page told me to use version 265.70.
The page telling me to use the newer driver was under the certified hardware page, where ACA is not a choice in the product used, only acad.The page telling me to use the older version was under the ACA support page.Then I go to the Nvidia web site and they tell me to use the 191.00 version.I'vehad a look nside the hardware XML installed with 2012 and te supported driver version is 6.14.0012.6570.
View 1 Replies
View Related
Aug 27, 2011
When would you use squared and non squared pixels?
If my understanding is correct non squared are used predominantly for wide screen.
View 5 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Feb 14, 2013
I bought Video Studio X5 about 6 months ago,Installed it, tried the feature I was interested (Video capture) and it failed. As I really didn't have the time to look deeper into that, I just put it on the side for later. I knew I would need it at a later timeNow, I need it.Of course, it didn't repair itself and failed again (When I launch vid capture it give me the now classic "prepare record failed #15" message and will not record).
Checked the website, there is one update, a service Pack 1. It fails to install "The version of the installation could not be determined"
View 11 Replies
View Related
Mar 9, 2012
Trying to download the version 5 trial and keep getting the message that the version 5 .exe file cannot be downloaded. It looks like 1.33 GB have downloaded and then it stops and gives me the option to retry or cancel and when I retry it gives me the same error message.
View 5 Replies
View Related
Jun 10, 2013
Normally i do camera work and edit in Pre, Ae with all the trimmings. I recently got into 3d work with the plugin that video copilot provides and now that my colleague is on holiday i'd figure i'd play around with his 3dmax and plugins. So i made an explosion in FumeFX and in itself it works fine but the "Kaboom" needs to move towards the viewers at home. This works but the smoke loses its sharpness as it progresses towards the camera.
What do i need to do here? In AE i can adjust the DOF of the camera layer and also the aperture. i'm not finding this in 3dsmax. I have positioned the camera within the area of the explosion and it should be inside the bounding box but i'm not sure. I used the standard track camera with the little target box. Didnt change a thing to the default settings.
[URL]
I'm gonne try and cheat by exporting it twice as big as normal HD and the scaling it down.
View 9 Replies
View Related
Jan 18, 2014
I am on the final stages of finishing my first ever HD project, having made the jump Premiere Pro 2.0 to Premiere CS5. Mid-way thru I found it necessary to upgrade to Creative Cloud, so that is where I am working now. The HD world is so vastly different from the old SD flow that every single step of this project has been a huge learning curve for me. I am basically an 'oldie' but for all practical purposes I am a total 'newbie' at this. That said, I am now finding myself ready to export my project to DVD in a SD form with Stereo sound.
I am working with footage shot on the Red Epic. At my current stage I am working withh ProRes 444 renders from which I have created a full nested 74 minute timeline. Frame rate is 23.976 and the source is1920x1080 with 1.0 square pixels.
So now my movie is done, and it looks and sounds like I want it to. The question now, in a nutshell, is what file type and settings should I use to export my movie so that I can retain aspect ratio? Should I output a movie first or take the project into another program like encore first and make my disc from there?
Also, I have my first screening coming up (primarily for cast and crew and industry insiders) in a couple of weeks, so I need to create a 1080 HD File with my 5.1 surround track that I project from a laptop. The screening venue has the capability to do that via a simple HDMI cable hookup, but does the laptop I use need to have any special capabilities to do the job? And what is the best file type to use for that?
I have always been more of an artist than a tech head, but I am pretty much doing the whole post on this movie alone, with the exception of the Dissolve renders and the sound design, which I had done for me (I have a great finished 5.1 design in .wav format, as well as a stereo version).
I should also mention that I currently have Encore CS5. Can I work with this on a Premiere CC project?
View 5 Replies
View Related
May 19, 2006
Video Studio v10 Trial . . Under Share / Create Video, there are WMV output resolution options available that exceed 320x480 (ie 1280x768), however when I choose any of these options, the standard result that I get is 208x160. Additionally, Share Video Online / Best Quality is supposed to output a file at 640 x 480, however I am only getting a 208x160 WMV resolution file. I have simplified my testing by only using a single 2816x2112 image displaying itself for 10 seconds .I am using a Trial version, however I can't find anything on ULead's site to support my theory.
View 14 Replies
View Related
Feb 2, 2013
I tried to download this SP but got a message "The installed version of the application could not be determined. The set up will now terminate"
View 2 Replies
View Related
Jul 23, 2013
How do I find the current version of VSProX6 that I am running?
I have tried numerous times to download the Newblue TitlerEX from the "Do More Tools" tab. I get an "Your download is ready. Install Now" notice, but nothing happens and nothing appears in my download folder.
View 12 Replies
View Related
Dec 1, 2012
Do these NewBlue FX Plugins work in C VS5? I was trying to install the free Cartoonr plugin but I do not see it after install.Perhaps it's in the wrong folder, or the plugin is not compatible with VS5?Also was considering purchasing the following. Are they compatible with VS5?
Video Essentials IV
Video Essentials VI
View 5 Replies
View Related
Mar 7, 2012
UI Layout - no custom modes available in trial version. Is that because it's the trial version or do I have an error?
View 2 Replies
View Related
Jun 24, 2013
(what i've been using is photoshop) and my problem is that I want to save a jpg file, so I create a document at 1920x1080 pixels at 300 dpi and once finished I go to the option of export and set it to 300 dpi and it saves it at 8000x4500? when I set it to 72 dpi there is no problem and saves at 1920x1080, but I want it at 300 dpi and not such a big file that sometimes it doesn't even have enough memory to save.
View 7 Replies
View Related
Mar 4, 2012
I am using a competitor product for video editing and now I am looking for a new product since the support there was really bad. I tried the testversion of Videostudio X4 and downloaded the recommended file from the website which is the german version. I installed it on a XP 32 Bit machine and also on a Vista Ultimate 32 Bit machine.
In both cases the first dialogs (welcome and registration) after running the program are in Chinese language. Now, the problems are:
- Although I can translate the contents by google translator I do not register the program in this case. I don't know what is comming up after that.
- The Corel support does not do anything when you don't specify a registered product.
View 8 Replies
View Related
Dec 16, 2013
When you're in source-sequence mode and push "f15" key (that is "player view mode" shortcut) several times, you can switch between different view modes. One in particular kept my attention: you can output a video frame with 3840x1080 resolution (double full hd), composed by primary output (on the left) and secondary output (on the right).
The strange thing is that these two video streams (primary and secondary) are not in sync: in fact secondary one is always delayed by one frame.
What is the purpose of this view mode? Is it possible to sync primary and secondary output in this particular mode? It would be great, because this way we could finally output stereoscopic 3D in side-by-side mode!
View 9 Replies
View Related
