Illustrator :: Cutting Section Out Of Object And Rejoining
Feb 6, 2013I have an object that i need to cut a section out of the middle and bring the two remaining sections together.
View 5 Replies
ADVERTISEMENT
Illustrator :: Cutting Section From Image On Artboard
Sep 11, 2013I want to cut (or copy) a section from an image on my artboard, but I can't see to find a way to do it. For example, in Microsoft paint I can use the select tool to draw a rectangle around part of the image and Copy or Cut that selection into the clipboard and paste it back.
I know I can cut this out and paste it onto an Artboard, but I am curious about the capability in Illustrator.
Illustrator :: Connecting And Cutting - Cut A Triangle Into Object?
Dec 12, 2013How do I connect a circle and a square ? How do I cut a triangle into an object?
View 14 Replies View RelatedIllustrator :: How To Fix A Gradient Down So It Doesn't Move After Cutting Object
Jul 22, 2013How do I fix gradients within an object so that they remain where they are when the object is cut using the intersect paths tool, instead of the gradient fill being redistributed to the new object?
Also, how do I use the colour picker tool to pick a discrete colour within an object filled within a gradient, rather than it selecting the whole gradient swatch?
Revit :: Cutting Wall Section Views?
Jul 1, 2009breaking wall section views ? ie. using the section view tool works very well for a BIM wall type, but how can we cut the section so we don't need to have the view show the entire height, etc of the wall. especially when fitting in representative sections of twenty different wall types/situations on a single sheet ?
View 2 Replies View RelatedAutoCAD Inventor :: Splitting / Adjusting And Rejoining A Part
Dec 2, 2011I can split a part into 2 solid entities, I now want to rotate one of these entities with it's features say 30 degrees or whatever and then rejoin them as a newly shaped part.
I think all this is possible apart from rotating the split solid after splitting?
how can I rotate my split solid?
3ds Max :: Cutting A Poly Object?
Dec 13, 2011Am trying to cut a circle into my geo but i cannot cut between vertex, its snapping to the vertex, and i currently don't have snapping on is their another option for the cutting tool somewhere?
View 1 Replies View RelatedAutoCad :: Pipe Cutting Template - How To Unwrap Pipe Into Flat Section
Dec 27, 2003I have these two pipes, one is 4" diameter (running horizontally) and the other is 6" diameter running at a 30degree from horizontal angle. eventually the two hit, and at that intersection I need to make the 4" pipe join to the 6"' pipe, which then continues on its merry way farther down the structure. So I can extrude the two pipes, and I can even make a union and then remove the excess of the 6" pipe, because what I am really looking for is: a cutting diagram for the joint where the remaining 4" pipe hits the 6" section. A cutting diagram for the short piece of a Y joint.
I can make this image appear on my screen, but I am then stumped as to how to unwrap the pipe into a flat section so that I can see the curvature of the cuts required in planar view, for the real pipe that I have on my shop floor.
CorelDRAW Graphics Suite X5 :: Cutting Out Center Of Object
Nov 26, 2011Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies View RelatedAutoCAD 2013 :: Create Invisible Extrusion Rather Than Cutting Into Object
Sep 28, 2012Press/pull has been working fine up until now. When I try to press/pull a boundary, it creates an invisible extrusion rather than cutting into the object.
View 3 Replies View RelatedAutoCAD Inventor :: Cutting (derive) Sheet Metal Object
Sep 30, 2013I'm working on a bracket within Inventor, in order to get the head of the bracket correct (so that it will fit into a bar) I want to derive the bar and use it to cut the slots needed.
Although I have had some problems with this due to the bracket being sheet metal for bend radius reasons.
CorelDRAW Graphics Suite X5 :: Cutting All Components Of Image Using Cutting Master 2 Plugin
Aug 1, 2011I have downloaded an eps file, which I need to cut. I use a graphtec ce5000-60 cutter, and a plugin called cutting master 2 in order to use coreldraw.
when i select application launcher and choose cut / plot, it opens cutting master. when i do this, it only shows the 2 outer lines of the logo i need to cut. I have attached a screenshot so you can see exactly what I mean. I have tried lots of things to recitfy this, but as a complete beginner with this software, I really dont have a clue.
AutoCAD 2010 :: Cutting Solid Into Two With Non-planar Cutting Plane
Aug 2, 2012Is there a way to cut a solid into two pieces using a non-planar cutting plane? I have been tasked with calculating the volume of concrete damage in a chute block. I have a sketch of the damage on the chute block. I created the chute block as a solid and then drew the damaged area extents using plines. This created non-planar plines. Is there a way to get this to work that will allow me to see the volume of the concrete damage? I need an easy way to do this, there are 50 chute blocks all the same size but with varying degrees of damage
View 1 Replies View RelatedAutoCad 3D :: How To Section 3D Object
Apr 30, 2011I have a problem with sectioning this object. I am attaching here the 3d object and how it should look...
View 5 Replies View RelatedIllustrator :: Cutting Off A Point?
Aug 1, 2013As you'll see in the attached image, the red path goes past the black shape. Is there a way to change the path so that it lines up perfectly with the edge...meaning it's a perfect clean intersect, not just the lower right end of the path lining-up at the edge, but the top right too.
View 7 Replies View RelatedIllustrator :: Cutting An Image Using A Vector
Nov 16, 2012i have a vector that i want to apply an image to. So i dropped the image into illustrator, and made a clipping mask, but if i go to save it, or print it, it tries to print space where the image is, even though it's only inside the vector outline. Kind of confusing with the wording, see pics, but I just want the vector to cut out of the image, and get rid of the rest of the image.
View 4 Replies View RelatedIllustrator :: Cutting A Path In Half?
Jun 30, 2012I want to cut a path in half. I've searched far and wide around the internet on how to do it but couldn't find any results.
View 3 Replies View RelatedIllustrator :: Cutting Gradient Stroke In CS6
Oct 11, 2012Is it possible to cut or erase part of a gradient stroke? The attached image shows a. the stroke I need to cut and b. the stroke as I would like it to appear - (at the moment I have just covered it(b) with white fill. I have tried Expanding, Outlining path and Flattening, but with no luck.
View 10 Replies View RelatedIllustrator :: Cutting Diagonally A Letter?
Nov 5, 2013through cutting diagonally the letter X which is part of a word. ( illustrator CC)
View 4 Replies View RelatedIllustrator :: Cutting Part Of Path
Jan 4, 2014I use Illustrator CS6, I used the pen tool to create an elipsoid "shape" by creating a path and giving it stroke and fill, I made a second one ot top of the first, now the second one covers the first at about mid level and I want to cut the top part of the first shape/path, that is showing, off.
I have tried with various methods but with strange results.
Illustrator :: Resizing A Path Without Cutting
Jun 30, 2012I'm New to illustrator. I would like these bricks to get small as they go to the right. When I reshape them it cuts the bricks instead of resizing. How to get this effect of the bricks getting smaller.
What I Have...
What keeps happening...
What I would like...
AutoCAD Civil 3D :: Unknown Object In Section
Jul 22, 2013if I grab it the ribbon tells me it is the corridor. Other than that the section looks fine.
View 4 Replies View RelatedPhotoshop :: Cutting A Square In Half (Illustrator)
Apr 19, 2007How in the world do I cut a box in half so I can have 2 objects I tried using the slice tool, but not working.
View 4 Replies View RelatedIllustrator :: Managing DWG Scale For Laser Cutting
Jun 20, 2012I need to save from Illustrator in .dwg format, for laser cutting. However the scale shown in Illustrator is not the same scale in the .dwg when they look at it at the laser cutting firm.
btw when I export in .dwg format the setting for scale is set at 1 centimeter = 1 unit. I don't know what they mean by unit however.
Illustrator :: Cutting Out A Shape With Compound Path?
May 23, 2013Cs6 here.... I am trying to cut out a simple shape to allow the area under the shape to be trasnparent or Alpha. Like a Mask. Except when I use the Mask it does at it should do and mask the area where the shape is and MASKING or removing the areas not under the mask. I tried Compound path but I am not getting any result from it. My shape stays right on top of my work and does not "cut it out" to allow the Background to shine through as an alpha channel. See pics for clarity. I want to reverse this where the circle is cut out and the rest stays visible...
View 11 Replies View RelatedIllustrator :: Cleanly Cutting Curved Paths
Feb 5, 2014I've been working on trying to make this once-a-circle curve cleanly shaven off to the edge of the green box it's on top of, but instead I always end up with the result you see below:
So, is there any way I can crop it off right to the edge rather than actually just getting shorter whenever I try to get rid of the bit hanging off there?
AutoCAD Civil 3D :: Representing Object In Section Views
May 22, 2012I have to represent a road section with limits of houses or any interference on field. All of thees interferences are poly lines, 3dpoly, lines, etc. Is it possible to have a little mark or something like this in a road section, it will work for me a lot for represent the houses in my sections.
View 1 Replies View RelatedAutoCAD Civil 3D :: Projecting Object To Section View?
Nov 15, 2012Is there a way to project to seperate feature lines with 2 different label styles. Am able to project object to view but both have same label. Need one to have Ex. R/W and the other NEW R/W, would like to do as one change rather than change each for every view.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
Illustrator :: Cutting Shapes Path From Shape Group
Oct 26, 2012I want to make the A shape as if it was composed from the grouped hexagons from B. the hexagons from B are grouped and the shape from A was made from two elipses and function Minus Front prom pathfinder.
I've tried all the functions from pathfinder in all ways but some don't give a result(I don't need explanation for this) and some do not work as I wish.
AutoCAD Civil 3D :: Section View For Pond Grading Object
Jun 9, 2013I created a Pond Grading object with the associated surface. How can I cut and plot Section Views of the Pond Grading object just as I could do(using "Create Multiple Section Vtews" command) with Corridor object of a Linear project?
View 2 Replies View RelatedIllustrator :: Dividing (not Cutting) Shape Into Parts And Coloring Them Differently
May 19, 2012I need to divide a shape, say ellipse or similar, into 1 or 2 parts and then color the parts different colors and stroke the borders of each part. I don't want to cut the shape up, just keep it as a multi-colored object.I've tried scissors and similar tools but they cut and this is not what I want.
View 10 Replies View Related
