I created a Pond Grading object with the associated surface. How can I cut and plot Section Views of the Pond Grading object just as I could do(using "Create Multiple Section Vtews" command) with Corridor object of a Linear project?
View 2 Replieshow to create a section view for a pond other than quick view.
View 2 Replies View RelatedI can create pond quick profile,but it can not be saved.
if I press the section view command ,it tells me no alignment .you know ,I only create pond without any alignment .I only created pond by grading .so I don't know how to create pond section.
After crating my squared pond (or waste landfill for that matter) I runned a cross section from an alignment running across the the entire pond. The cross section did not show the bottom of the pond. I noticed that I forgot to do an infill to the bottom of the pond so I did it. But, still the bottom of the pond its not showing up in the cross section, just the side slopes. Do I have to delete the alignment across the pond and recreate it? That is probably the only thing I have not done. BTW, I have an access road coming down the side of the pond with a corridor created already and is not showing up neither on the cross section.
PD: I am running Civil 3D 2012!
Is there a way to project to seperate feature lines with 2 different label styles. Am able to project object to view but both have same label. Need one to have Ex. R/W and the other NEW R/W, would like to do as one change rather than change each for every view.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedI am tring to grade a complex object. Please see the attached document. The two grading objects are not interfacing correctly when graded although i can get the surface almost correct i beleive. Is there a way to remove this issue or the grading will not create a lot of difference when computing the volume clacs ( we are talking volum computation roughly about a million cubic metres cutting).
View 4 Replies View RelatedI am having difficulty projecting an existing feature line at a specified tie-in slope. I have a steep (3:1) feature line that I need to project at a specific slope (2.5:1)to intersect a surface model. When I create the grading object the generated grading object is not 3:1 along the feature line and 2.5:1 perpendicular to the feature line. Instead I am left with a new slope that is 1.9:1 between the generated contours. I have attempted slope to surface as well as slope for a distance.My design criteria is to not exceed a 2.5:1 tie-in slope.
View 1 Replies View RelatedHas the grading objects become anymore stable than they are in '09? Unfortunately, our company hasn't been able to upgrade to a newer version and we are beginning to get to the point where 'hand grading' everything is taking too long. I am proficient in using the grading tools, but everytime I do, my drawing becomes corrupt. I want to push us to the newer versions if at all possible.
View 9 Replies View RelatedI am creating a simple, and although it's large (100 million gallons), the grading object routine is relatively simple. I have the inside crest of the berm and I'm grading down 40-50 feet. Everything is fine until I infill the bottom of the basin and then the infill line around the perimeter of the bottom has two points that are way below the actual bottom, like another 100+ feet. The two points are on opposite sides of the basin so obviously it throws off the whole resulting surface and causes earthwork calculations to be invalid.
I've tried various sizes and shapes, having the crest feature line both "open" (with a tiny gap) and "closed", straight and arc shapes for the crest, grading to elevation and to relative elevation, and probably more. This problem seems to appear in each scenario.
Version: Civil 3D 2012 on a Dell PC
I am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies View RelatedI like the 'Extract" feature for surfaces, where I get get the contours or boundary of a surface in PL form without having to explode the surface. I have not figured out how I can do that same thing for grading objects. So far I have been exploding grading objects and then remaking them. Seems cumbersome.
View 7 Replies View RelatedWhere are the setting for the display for grading lines such as features, daylight lines, etc in the standard grading pallet?
View 1 Replies View RelatedI am working on a complex industrial site. And I would like a constant grade of 3.00% from my road intersections to the edge of curves. I know if I used a corridor, I'd be able to tell the grading to project ot the edge of the road/curve.
I'm just wondering if I can tell a grading object to project to a polyline or feature line along a intersection curve? There are many reasons as to why I'm not using corridors for this project, but I don't want to get into that.
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
"An infill grading has no criteria applied to it. Any area bounded by feature lines or lot lines that is not already a grading can be converted to an infill grading."
So given an area enclosed by a feature line, an infill grading can be created. Using the same features line, an feature line grading can also be created. what is the difference between these two surfaces? They both have no criteria applied to them.
We have a project where the alignment is not in the center of the section (it's along one edge of the project), but we want the Title Annotation ("STA. 165+00") to show up in the center of the sections.
If you choose "Center" justification in the style, it "centers" it about the zero offset, which in our case is actually the left side.
Is there any way to truly center this call, short of turning it OFF and manually creating separate labels?
Unfortunately, I can't use "Center" and give it a "Y" offset, because the alignment does vary slightly (±30 feet) within these 250' cross sections - which would cause the label to vary by that much also...
With ProfileView I can get Alignment Id.
pv= trans.GetObject(entRes.ObjectId, OpenMode.ForRead) as ProfileView; ObjectId idAlin = pv.AlignmentId;
Now, I want to do the same but for SectionView.
sv= trans.GetObject(entRes.ObjectId, OpenMode.ForRead) as SectionView;
but there isn´t : sv.AlignmentId;
Are there any ways to get Sample Line Group Id from section view either section view name or id?
I would like to get station value from selected section view by pick too.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
is it possible to export the position and elevation of points plotted in a section view to a csv or txt file? I have a surface with section profiles cut every 100 feet or so, and would like an external copy of just the data used to plot the section views to use for another analysis.
View 9 Replies View RelatedI'm trying to get rid of the section centerline (red) and magenta circle (shown in the attached image) that persistently show up only in 1 of 10 sections generated via sample lines along an alignment. How to get rid of them?
View 3 Replies View RelatedWhen I click view extents in section editor it zoomes to my assembly. WHen I go to my next station, it zooms out to ridiculous values. How can this be set so I can do some work? I want to view my assembly and a few feet extra left/right/above/below.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I have a problem to set more bands in section view.
Normaly I word with 3 bands (existing elevations, designed elevations and the distances between them), but now I need another 2 bands:
1) is the diference between the top surface of the coridor and the existing surface
2) is the diference between the bottom surface coridor and the existing surface
I want ot ask maybe there is a setting to not let me make more bands?
In fact I make the 2 more bands but the Civil 3D 2012 and 2013 is not giveing me the data in these bands.
I uplloaded a picture for example to be more clear.
I am working on a drawing for the COE. They require that the horizontal scale is 1"=20 feet for cross sections. Unfortunately the sections that I need to cut are so long that they don't fit on the page. Currently I am creating multiple viewports in paper space and creating split section views in that way but it is starting to get out of hand.
Any better way to handle sections that won't fit on a page? I can't change the scale.
I am trying to plot all my cross sections in a drawing, but I whant them in a vertical line. It seems that I can only plot in a horizontal line on sheets.
View 4 Replies View RelatedIs there anyway to create a section view label where you input the offset and elevation data into a section view similar to a station & elevation label for a profile view (see Station-Elevation attached)? Out-of-the Box section view offset elevation labels can only be placed on the section view and dragged to a specified offset & elevation.
View 1 Replies View Relatedhow can I have diferent hatch on the section view, one when I have cut and another when I have fill.
seet attached.
How to set (not to get) maximum or minimum elevation of a grid of specific section view in COM API c++?
or Just tell me the name of the function in COM API c++?
Right, I'm working on a pressurenetwork for a new drinkwaterpipe. I created an alignment from network using the launch pad in the associative tab.
The alignment is crossing several other pipes and cables. What I made using the alignment is a surface profile and the profile of the drinkwaterpipe. Now I want to project the crossing cables and pipes into the profile view.
Now unfortunately it doesn't 'cut' the crossing cables and pipes at the alignment intersection, which would result in circles in my profileview. Instead it projects whole strengs of pipe.
Is there any way to create a section view from an alignment from start to end, instead of sample lines perpendicular?
I am creating section view with my road project. I successfully created center line alignment, surface, surface profile, sample line and section views on every station I needed on my design.
I want to see "subassembly" (travel lane, curb & gutter, sidewalk, 2:1 slope) on my section view. I can block, insert and copy it to my section my manually, but I know this not the right way to do.