I can create pond quick profile,but it can not be saved.
if I press the section view command ,it tells me no alignment .you know ,I only create pond without any alignment .I only created pond by grading .so I don't know how to create pond section.
how to create a section view for a pond other than quick view.
View 2 Replies View RelatedI created a Pond Grading object with the associated surface. How can I cut and plot Section Views of the Pond Grading object just as I could do(using "Create Multiple Section Vtews" command) with Corridor object of a Linear project?
View 2 Replies View RelatedAfter crating my squared pond (or waste landfill for that matter) I runned a cross section from an alignment running across the the entire pond. The cross section did not show the bottom of the pond. I noticed that I forgot to do an infill to the bottom of the pond so I did it. But, still the bottom of the pond its not showing up in the cross section, just the side slopes. Do I have to delete the alignment across the pond and recreate it? That is probably the only thing I have not done. BTW, I have an access road coming down the side of the pond with a corridor created already and is not showing up neither on the cross section.
PD: I am running Civil 3D 2012!
I have a surface and i have the outer border of a pond i want to create (see attachments). What makes it difficult for me is that different areas of the pond have different slopes. The area marked as "A" has a slope of 1:5, the are has a slope of 1:2 and the rest of the pond has a slope of 1:1.
My problem: I do not know how to grade the borderline so i end up having a surface with different slopes as my pond.
I have a manure storage pond that I am trying to figure out the total storage volume for. It has 2.5:1 Side slopes and a 10 foot wide ramp at 10:1 entering the pond to the floor bottom. I am trying to figure out what the volume of this pond is. What is the fastest and most efficient way to get this volume? I do not want it compared to any other surface such as existing ground.
View 7 Replies View RelatedI have a surface built for the bottom of a pond. The way to get the surface area (not the volume) of the bottom of this pond?
View 2 Replies View RelatedI have 2 feature lines, one is at elevation 132 (TOB), and the other at 123 (TOE). I inserted elevation points at an increment of every 3 ft., which should make a smooth arc of contours around the pond.If the issue was resolved by this method, please click on "Accept As Solution".
View 9 Replies View RelatedI am trying to add an entry point to a retention pond that was created by grading tools. I will to entry point to be shaped like a trapezoid. I also want to grade a entry point to the slope of pond to control water erosion.
I have been trying to add the entry point for days.
I am designing a retention pond in an existing surface. I set the base of the pond and execute the grading at the desired slope and it generates the pond just fine, with the exception of rounded corners. I need the corners to be square, mitered corners instead of the round.
I'm using Civil 3D 2013.
I'm designing a wrap for a hummer. My client wants it to look like the hummer has a force field and show a few bullets hitting the truck and causing a ripple. I googled this and found out that the "zig zag" filter under "distort" does this. Only problem is, this option is greyed out on my comp. It could be that my project file is half a gigabite (required for the size of printing on the truck).
View 13 Replies View RelatedI have a small site where i've essentially designed a storage pond. I've cut 3.0m off the original ground at a 2:1 slope and built a berm at a 2:1 fill slope to a designed elevation. I've managed to balance the site to zero. The contour drawing I have shows elevations - which is great - however the client has asked to see the contours showing a Fill or Cut label from the original ground.
View 5 Replies View RelatedWhen I create multi sect views they plot 3 rows from left to right shown below:
0+00 1+00 2+00
I would like it to plot from bottom to top like shown below
2+00 5+00
1+00 4+00
0+00 3+00
Is there somewhere to adjust the settings?
I am trying to create some cross section reports. But I have noticed that none of the options available (Section Point Report, or any of the ones that use Sample Lines) will show any featureline information if it is not part of the region which is attached to the alignment chosen in the report.
For instance, I prefer to create my splitter islands as a seperate baseline (levels taken from a dummy surface) and add a simple kerb assembly to this. (So both are in the same corridor). My normal visual cross sections show the splitter island kerbs without issue. But the cross section reports do not.
I have a similar problem with some of the footways, which are created on a separate baseline. (I am working on car parks, where the footway surrounds the car park. So it is easier to create the footways seperately). The section reports do not pick up the footways, presumably because it belongs to a different baseline.......
I dont understand why a section report cant simply pick up any featureline it crosses??
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
I try to create existing road cross section in civil3d only with offset and elevation.
View 4 Replies View RelatedAttached is my 1st project using SSA for detention pond design.
Where is the best place to view the results for the detention pond peak outflow and maximum HGL?
Also, the program seems to separate the results per year storm...anyway to view the results for all year storms in the same report?
how do you attach the .spf file?
2013 Civil 3D
I have been using the "Create Surface Profile" to create cross sections of a road at various points using separate alignments (at the various points). I was wondering if there was a more sophisticated way to do this? When comparing my work to other plans it seems that this method is juvenile.
View 3 Replies View RelatedI have in front of me a survey of a small section of road (it's only 10m x10m or something). I want to be able to create a profile along the road section to demonstrate the surface level changes. I have created a network surface but Civ3D doesn't seem to able to use this type of surface to create a profile. Is there anything I can do, perhaps a way of transforming the network surface into another type of surface? Or am I going to have to manually create this profile in ACAD!
View 7 Replies View RelatedI am attempting to create section views from a corridor. I have about 80 sections total that I would really like to stack 3 high...then just across the page. Any step by step that make this process easy to understand?
Right now I get 10 high then across the page (using 'draft' option). I've tried to make a dwt at a 10 scale, (setting the viewport at 10 scale and viewport as a 'section' in the properties), but when I use that, the sections start overlapping (this is using the 'production' option).
How would I go about creating a cross-section band style in C3D 2012 like the one attached?
View 6 Replies View RelatedI have a site, on which I've created both a berm and a retention pond to contain runoff. I now need to see if this is retaing enough water at a certain surface elevation.
The existing site is one surface and the berm/pond are another surface.
Is there a way to do this?
When creating multiple section views with production as the placement option, all the sections superimpose on top of each other. Attached graphic.
I tried to attach the .dwt file used for the multi section view, but the site doesn't allow upload of file extension .dwt.
So, I we were taught autocad at hour school but not autocad architecture because apparently autocad architecture is too "advanced" for us. so now I need to draw window details (thermally broken aluminum frame window with insulating glass unit) but it is so much work in autocad however I was told that I can just draw a window in autocad architecture and just cut a section and just make a few adjustments to get the window detail.
View 6 Replies View RelatedI have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies View RelatedC3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
In my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies View RelatedI think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
I've got a corridor where the section editor does not show a section that the corridor has created. My frequency is set to 25' with high/low points along curves. At station 22+75, in the model space the corridor shows a section being created (image #2). However, I cannot edit or even see that section in the section editor (image #1). The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station. This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.
In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00. I am needing to manually adjust the cross slopes of my lanes. If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%. I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.
What is causing the section editor to not even recognize a section? How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View Related