I am trying to add an entry point to a retention pond that was created by grading tools. I will to entry point to be shaped like a trapezoid. I also want to grade a entry point to the slope of pond to control water erosion.
I have been trying to add the entry point for days.
I have a site, on which I've created both a berm and a retention pond to contain runoff. I now need to see if this is retaing enough water at a certain surface elevation.
The existing site is one surface and the berm/pond are another surface.
Is there a way to do this?
I'm running WinXP SP3. I just upgraded from CS2 to CS4 (and yes, I installed the update.
I'm currently running 11.0.1).
Whenever I load photoshop, just as it is about to finish "Initializing panels..." an error box pops up saying: "Adobe Photoshop CS4: Photoshop.exe - Entry Point Not Found" "The procedure entry point
Is ThreadDesktop Composited could not be located in the dynamic link library USER32.dll." After the box pops up I press the "Okay" button (that's the only one there) and it then opens Photoshop - which works perfectly. No other errors, no missing functions, no lag.
I'm pretty sure getting an error during start up is a good indication that not everything is 100%.
I'd like the option of manually entering information in one column of my point table. I can see how to create a blank column with a title, but how do I edit those cells?
In my particular case I use a point label style in my drawing that contains "Full Description": "PK8", for example. This works great for displaying my point in the drawing - I DO want the number to appear - but when I want to see it in a table, I just want to see 'PK' in a Description column, next to the (obligatory) 'Point Number' column. Having the Description column read 'PK8' next to the point number is redundant. I don't see how I can get this in automatically
Not sure why this has happened but all of a sudden, my AutoCAD 2013 install is reporting an issue with the "Entry Point Not Found"...
The procedure entry point ?bmpout@@YAXPEB_WH@Z could not be located in the dynamic link library accore.dll.
I'm hoping this isnt related to the Windows OS which is Windows 7, 64 Bit but i do recall some updates being rolled out recently which caused problems with ESRI products...
I can create pond quick profile,but it can not be saved.
if I press the section view command ,it tells me no alignment .you know ,I only create pond without any alignment .I only created pond by grading .so I don't know how to create pond section.
I have a manure storage pond that I am trying to figure out the total storage volume for. It has 2.5:1 Side slopes and a 10 foot wide ramp at 10:1 entering the pond to the floor bottom. I am trying to figure out what the volume of this pond is. What is the fastest and most efficient way to get this volume? I do not want it compared to any other surface such as existing ground.
View 7 Replies View RelatedI have a surface and i have the outer border of a pond i want to create (see attachments). What makes it difficult for me is that different areas of the pond have different slopes. The area marked as "A" has a slope of 1:5, the are has a slope of 1:2 and the rest of the pond has a slope of 1:1.
My problem: I do not know how to grade the borderline so i end up having a surface with different slopes as my pond.
I have a surface built for the bottom of a pond. The way to get the surface area (not the volume) of the bottom of this pond?
View 2 Replies View RelatedI have 2 feature lines, one is at elevation 132 (TOB), and the other at 123 (TOE). I inserted elevation points at an increment of every 3 ft., which should make a smooth arc of contours around the pond.If the issue was resolved by this method, please click on "Accept As Solution".
View 9 Replies View RelatedI am designing a retention pond in an existing surface. I set the base of the pond and execute the grading at the desired slope and it generates the pond just fine, with the exception of rounded corners. I need the corners to be square, mitered corners instead of the round.
I'm using Civil 3D 2013.
I created a Pond Grading object with the associated surface. How can I cut and plot Section Views of the Pond Grading object just as I could do(using "Create Multiple Section Vtews" command) with Corridor object of a Linear project?
View 2 Replies View RelatedAfter crating my squared pond (or waste landfill for that matter) I runned a cross section from an alignment running across the the entire pond. The cross section did not show the bottom of the pond. I noticed that I forgot to do an infill to the bottom of the pond so I did it. But, still the bottom of the pond its not showing up in the cross section, just the side slopes. Do I have to delete the alignment across the pond and recreate it? That is probably the only thing I have not done. BTW, I have an access road coming down the side of the pond with a corridor created already and is not showing up neither on the cross section.
PD: I am running Civil 3D 2012!
I have a small site where i've essentially designed a storage pond. I've cut 3.0m off the original ground at a 2:1 slope and built a berm at a 2:1 fill slope to a designed elevation. I've managed to balance the site to zero. The contour drawing I have shows elevations - which is great - however the client has asked to see the contours showing a Fill or Cut label from the original ground.
View 5 Replies View RelatedAttached is my 1st project using SSA for detention pond design.
Where is the best place to view the results for the detention pond peak outflow and maximum HGL?
Also, the program seems to separate the results per year storm...anyway to view the results for all year storms in the same report?
how do you attach the .spf file?
2013 Civil 3D
I am no longer able to open any image file (psd, jpg, tiff). When I double click one or right click and File>Open with, I get the following error msg:
Photoshop.exe - Entry Point Not Found
The procedure entry point ?getA3@LiveBase ScCore@@UEAAPEAXH@Z could not be located in the dynamic link library ScCore.dll.
The significant event that occurred a few minutes early Windows crashed when I tried to put it to sleep. Photoshop and several other apps were open at the time but CS6 is now not functioning and I expect that it did not like the abnormal shut down.
Why do I continue to get this message?
The procedure entry point - ?initialize@Library@OGL@AIF@SAXPEAUcontext@23@AEBVInitOptics@Extensio nManager@23@Z - could not be located in dynamic link library aif_ogl.dll
I've uninstalled and reinstalled PhotoshopCC
CorelDraw.exe - Entry Point Not Found. what do i do?
View 3 Replies View RelatedCannot get Illustrator CS6 to run. All othe CS6 components are running fine.
Every time I try to start Illustrator I get error message:
The procedure entry point
?AcquireVarient@ImageInterface@drawbot@dvaui@@QEBA?BV?intrusive_ptr@UI mageInterface@drawbot@dvaui@@@boost@@V?rational@J@5@@Z could not be located in the dynamic link library dvaui.dll.
This is on a Window 7 Pro PC. CS5 previously ran fine, but computer was rebuilt after a harddrive crash then loaded with CS6 and this problem began. CS6 installation on laptop works fine, so downloaded files are OK.
I have tried to uninstall and reinstall twice, but always the same result.
cs6. I downloaded the master collection and when i go to open Photoshop i receive the error,, "Photoshop.exe. - Entry Point not Found" "The procedure entry point GetLogicalProcessorInformation could not be located in dynamix link library KERNEL32.dll." My operating system is Windows XP, english
View 7 Replies View Relatedwhen i start PS CS3 i get the Entry Point Not Found Error
The procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll
And i've tried reinstalling PS
Nothing happens after i click ok ...
The error is 'The procedure entry point _except_handler4_common could not be located in the dynamic link library msvcrt.dll.'
I get that error message when I try to open Photoshop CS4. I also happens with Regbooster...
I reinstalled windows and installed SP3 again with all the latest C++ redistributable packs, framework packages, latest drivers for my components etc...
I'm getting this error with GIMP 2.8.4 on Windows 7:
(executable name) - Entry Point Not FoundThe procedure entry point __gxx_personality_sj0 could not be located in the dynamic link library libstdc++-6.dll.
Where (executable name) is any of the following:
web-page.exehelp-browser.exefile-pdf-load.exe
A search turned up [this page][URL] ...., but the problem seems to be with libatk instead.
So I searched my C drive for "libstdc++-6.dll" and found three copies of it:
- C:\Program Files\GIMP 2\bin
- C:\Program Files\GIMP 2\lib\gimp\2.0\plug-ins
- C:\Program Files\NifTools\NifSkope
Not wanting to mess with any files in the GIMP's directory, I renamed NifSkope's copy, but the error persisted. I also removed all plug-ins from my user directory as mentioned in the other thread.
It seems that the GIMP is still functional, but it's quite annoying having to click "Ok" three times every time I start the program.
Lightroom.exe - Entry Point Not Found. The procedure entry point CreateIUriBuilder could not be located in the dynamic link library iertutil.dll
View 2 Replies View RelatedI'm having problems with CC (photoshop) when updated I am using window 8 the upgrade to 8.1 came in and I updated everything is working well. I then updated Photoshop CC, and now I get this error message The Procedure Entry Point
?ProposeSearchBounds@StruturallmageEditing@@YA?AVBo@1@AEBV?$point2@Gil @boost@@AEBV21@M@Z cound not be located in the dynamic link Library C:ProgramFilesAdoveAdobe PhotoshopCC (64Bit)Photoshop.exe
I get the above message when i try to open the 64 bit version. The 32 bit version seems to work.I have tried unistalling photoshop and reinstalling but keep getting the same results.
How can I fix my PS creative cloud? I am getting the following error message: "Photoshop.exe - Entry Point Not Found".
View 1 Replies View Relatedwhen i start photoshop cs6 it prompts a error that
"The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERNEL32.dll"
What should I do?
I get a procedure entry point error every time I launch my Illustrator CS6.
View 1 Replies View RelatedWhat if an error is displayed upon opening photoshop cc "The procedure entry point AMTGetRoyaltyBearingLeids could not be located in the dynamic link library C:Program FilesAdobeAdpbe Photoshop CC(64 Bit)Photoshop.exe.".
View 5 Replies View Relatedhow to create a section view for a pond other than quick view.
View 2 Replies View RelatedEach time an @ is entered at the command line, C3D is freezing for up to 15 seconds before allowing the comand to continue. It wasn't happening last week and no changes have been made to the instalation. What could be causing this glitch?
View 1 Replies View Related