AutoCAD Civil 3D :: Unknown Object In Section
Jul 22, 2013if I grab it the ribbon tells me it is the corridor. Other than that the section looks fine.
View 4 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Representing Object In Section Views
May 22, 2012I have to represent a road section with limits of houses or any interference on field. All of thees interferences are poly lines, 3dpoly, lines, etc. Is it possible to have a little mark or something like this in a road section, it will work for me a lot for represent the houses in my sections.
View 1 Replies View RelatedAutoCAD Civil 3D :: Projecting Object To Section View?
Nov 15, 2012Is there a way to project to seperate feature lines with 2 different label styles. Am able to project object to view but both have same label. Need one to have Ex. R/W and the other NEW R/W, would like to do as one change rather than change each for every view.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
AutoCAD Civil 3D :: Section View For Pond Grading Object
Jun 9, 2013I created a Pond Grading object with the associated surface. How can I cut and plot Section Views of the Pond Grading object just as I could do(using "Create Multiple Section Vtews" command) with Corridor object of a Linear project?
View 2 Replies View RelatedAutoCAD Civil 3D :: Line Moves When Section With Projected Object Is Moved
Oct 31, 2012C3D 2012 SP2.1 on Win7-64
I have a marker on a cross section that was projected from a short feature line that I created from a 3DPolyline. If I move the cross section (they never come in correctly, right?), the feature line moves too. If I use a 3Dpoly, this doesn't happen. Only went to the feature line because for some reason, when I went to Project Multiple, the 3Dpolys weren't picked up.
Now I wondering if I've moved feature lines on other projects where I have moved the sections. Could be a real problem. Most of those, though, had a mix of feature lines and 3Dpolys, so they would only be partially messed up! Hopefully, I moved the sections before doing the projection.
CorelDRAW X5 :: File With Unknown Object
Mar 26, 2012A friend sent me the file with this object that I couldn't figure out what it is.I was wondering a transparency, but there is no "type" in it.Or maybe a lens, but still I could not recreate it.
Have a look to the file in: [URL].......
AutoCAD Civil 3D :: Pipe Section In Full Height In Section Views?
Feb 20, 2013I have lots of section views with some surfaces and pipes. Unfortunately, in a number of section views pipes are not shown in full height because the section view level range is too little. What I am wondering is - is it possible to automatically adjust section level ranges so that they fully include pipe sections? Please see also the image in the attachment.
View 2 Replies View RelatedAutoCAD Civil 3D :: Alignment Style - Section - Line Marker In Section
Mar 26, 2012C3D 2012...but this feature has probably been in C3D for sometime
1-What is a 'Line Marker in Section' Section component of an Alignment Style?
2-How is it used (example )?
AutoCAD Civil 3D :: Creating Section Sheets From Multiple Section Views
May 21, 2012When i am creating section sheets from multiple section views ,section sheet view port scale changes.I did set it correctly in my template.
For example it changs from 1:150 to 1:150_1
Then in section sheets scetions views are not displaying correctly.
When i change view port scale manually it shows correctly.But it should do to all sheets.
What should I do?
In model spacr multiple section views are showing correctly.
AutoCAD Civil 3D 2012 SP 2
Sri Lanka
AutoCAD Civil 3D :: Adding Cross Section To Section View Group?
Jul 17, 2013Is it possible to add additional cross sections (sample lines added after views were created) to an existing Section View Group?
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
AutoCAD Civil 3D :: Section Editor Vs Section Views Labels?
Aug 12, 2013In my section editor my labels show up correctly and in all the locations I want. But then, in my cross section file, I look in my section views and they are completely different. When I try to label more points under the Code Set Styles, they won't even show up on my section views.
View 6 Replies View RelatedAutoCAD Civil 3D :: Can't See Corridor Section In Section Views Only Existing
Mar 5, 2012I think I just haven't done this in a while and can't find the right setting.
I have existing sections.
I have section views.
I created a corridor.
How do I add the corridor section to my existing cross-section in the section views?
I can view them in the corridor section editor. But I should also be able to add the corridor section to my section views, right?
To plot them, do I NEED to do this through Sheets Sets? I don't have experience with sheet sets yet.
I don't use Civil 3D often enough anymore. Still learning much about the new interface and pulling a design together.
AutoCAD Civil 3D :: Corridor Section Editor Not Displaying A Section
Mar 8, 2012I've got a corridor where the section editor does not show a section that the corridor has created. My frequency is set to 25' with high/low points along curves. At station 22+75, in the model space the corridor shows a section being created (image #2). However, I cannot edit or even see that section in the section editor (image #1). The first screen shot shows the list of stations for the corridor in the editor while the second screenshot shows the model space at the problem station. This is in the middle of a region, so there shouldn't be any issues with other assemblies or regions.
In the section editor, Sta 22+74.91 is listed, skips 22+75, then lists 23+00. I am needing to manually adjust the cross slopes of my lanes. If I view the surface there is a weird dip because at station 22+75 the default slope of my lane is -2%. I cannot edit station 22+75, so I cannot adjust the cross slope of the lanes.
What is causing the section editor to not even recognize a section? How can I edit the cross slope at station 22+75 if the editor doesn't even display that section?
Infrastructure Design Suite Premium 2014
Civil 3D 2014 x64
Windows 7 64-bit
6GB RAM
AutoCAD Civil 3D :: Section / Section View Of A 3dpolyline Along The 3d Polyline
Oct 12, 2012I am working in Civil3d and have a 3d polyline that i want to generate a 2d section line of i.e the path of the section plane is along the 3d line
View 1 Replies View RelatedAutoCAD Civil 3D :: Unidentified Section In Section View
Nov 8, 2012I am having an issue when producing a section view with my corridor. I have a corridor and corridor surface, as well as an existing ground surface. I create a sample line group and sample EG, Corridor Surface, and Material. When I produce a section view I get 4 sections in the view: EG, Corridor Surface(with the corridor surface naming convention), and an additional section simply called "Corridor Surface".
This last section is strange in that it seems to be using the correct assembly, but not targeting the correct features. Also it has grips at all of the vertices which I havent seen before.
And the strangest part, when I click on properties for this section and go to section data, the columns for Description and Data Source are blank.
If there is no data source, then where is this section coming from, and why is it showing up when I did not specify that it be created. This is a real mind boggler to me and makes no sense. Screenshot attached.
AutoCAD Civil 3D :: Section View Properties - Section Tab?
Oct 16, 2012My future ground somehow disappeared out of one section view in my group. Under the section tabs I still have my existing ground and pipenetwork but the future ground isn't there. It remains in the other section views. How do I add it back?
View 1 Replies View RelatedAutoCAD Civil 3D :: Unknown Command XLIST
Apr 27, 2012I have always used the "XLIST" command to name the layer of x-refed objects. However, when I now enter the command, it says "Unknown command 'xlist.'"
I imagine this is a customization file issue?
AutoCAD Civil 3D :: Trimble Link Ribbon - Unknown Command
Oct 23, 2013I am using Civil 3D 2014. When click any of the buttons in the Trimble Link Ribbon, I get the following message:
TRMBIMPORTDATA Unknown command "TRMBIMPORTDATA (Or whatever command that had been issued)". Press F1 for help.
Another user in our office has everything in the Trimble Link work fine. We have tried upping my status to administrator for my computer, and that didn't work. When I installed CIvil 3D, I checked every button to be installed in the infrastructure design suite package....
AutoCAD Civil 3D :: Surface Profile - Use Interpolation To Get Elevation Of Unknown Points?
Jun 16, 2012When creating surface profile Is civil 3D use interpolation to get elevation of unknown (points which not having elevation data) points?
Or just join elevations which have elevation data(input data)?
AutoCAD Civil 3D 2012 SP 2
AutoCad 3D :: How To Section 3D Object
Apr 30, 2011I have a problem with sectioning this object. I am attaching here the 3d object and how it should look...
View 5 Replies View RelatedAutoCAD Civil 3D :: Add New Section Points Or Erase Section Points
Nov 29, 2013When I change a section to static mode, I would like to add new section points or erase section points.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
AutoCAD Architecture :: Change Orientation Of Imported 3D Object Into Plane Or Section?
May 2, 2013I like to attach a .aim or import a inventor DWG into a section and a plan in autocad.
But how do I select the right orientation on import? The default Inventor view is a sideview and won't work on a plan.
Right now it seems like I either have to go into 3D model view and rotate the object or have to change the orientation Inventor for plan and then reorientate it for section...
AutoCAD Civil 3D :: Object Information To Object Geometry
Mar 12, 2012I'm making a surface out of contours. The problem is the contours have the elevation listed under object information, not geometry (the contours were brought in from a GIS file, which I do not have access to, or I would bring them in again with the elevations properly assigned, this is not an option). How can I quickly change the geometry elevation property to match the miscellaneous property?
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
Illustrator :: Cutting Section Out Of Object And Rejoining
Feb 6, 2013I have an object that i need to cut a section out of the middle and bring the two remaining sections together.
View 5 Replies View RelatedAutoCAD Civil 3D :: Section Not Coming Right
Oct 8, 2013The cross section at the culdesac is not coming right (attached). Instead of a gradual slope, i get a drop near the centerline. I am targeting to the CL alignment and profile.
View 3 Replies View RelatedAutoCAD Civil 3D :: Section Views
Dec 6, 2012I am trying to create section views to track beach erosion. I have created an alignment and sample lines successfully. The shorter sections look as they should. The longer sections are a mirror of themselves (ex: a section that should be 529' in length is drawn as 1058'). Is this a matter of needing to create a corridor and going the other processes that normally have to be done for a road or is there something else I am missing here?
View 7 Replies View RelatedAutoCAD Civil 3D :: Png From Section Views
Oct 1, 2012I'm working with civil 3d 2012,I'm trying to find a solution for the following problem,in Civil I have an alignment of 2kilometer and they want a section view every 5 meters,
automatically I can create over 500 section views, no problem there,but then I want to plot these 500 section views to a png file,and to do that I need to get all of them in separated layouts, for which there also is an automated function but its stops at 255 layouts,I've done 4 km in split up drawings..I've got 40km left no option splitting it up in 1 km sections.
AutoCAD Civil 3D :: Cross Section Projection
May 12, 2012if i have one feature line i want to project to all sections in a sample line group it would seem you should be able to pick the one line and assign in a label style and you would be done quick and easy. instead if you pick the multiple projection option you get this percentage distance box and it tend to grab stuff you don't want.
View 2 Replies View RelatedAutoCAD Civil 3D :: Section Linework SHP File
Sep 24, 2013I could download a .shp file that contains the section linework for indiana in state plane Coordinates? I am not looking for perfect coordinates, just graphically pleasing. I would like to start a database of the section corners we have recovered and I think it would be neat to have the whole state.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
AutoCAD Civil 3D :: Section View Style
Jul 27, 2010We have a project where the alignment is not in the center of the section (it's along one edge of the project), but we want the Title Annotation ("STA. 165+00") to show up in the center of the sections.
If you choose "Center" justification in the style, it "centers" it about the zero offset, which in our case is actually the left side.
Is there any way to truly center this call, short of turning it OFF and manually creating separate labels?
Unfortunately, I can't use "Center" and give it a "Y" offset, because the alignment does vary slightly (±30 feet) within these 250' cross sections - which would cause the label to vary by that much also...
AutoCAD Civil 3D :: Get Alignment ID From Section View?
Nov 28, 2013With ProfileView I can get Alignment Id.
pv= trans.GetObject(entRes.ObjectId, OpenMode.ForRead) as ProfileView; ObjectId idAlin = pv.AlignmentId;
Now, I want to do the same but for SectionView.
sv= trans.GetObject(entRes.ObjectId, OpenMode.ForRead) as SectionView;
but there isn´t : sv.AlignmentId;
Are there any ways to get Sample Line Group Id from section view either section view name or id?
I would like to get station value from selected section view by pick too.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit