Illustrator :: CC Not Responding To Open Command In OSX 10.9
Dec 17, 2013
I just upgraded my iMac from Snow Leapord to Mavaricks 10.9 and Illustrator CS6 or Illustrator CC will not respond when you try and open a file. I tried Clicking on File/Open and also Cmd+O and it will not bring up the open dialog and will not respond and I have to force quit the program. If you double click on a file it opens but when you try and save it, the same thing happens, not responding and have to force quit. It also happen in Photoshop.
I have looked at all the discussions relevant to this problem and can't find an answer. I am doing the TOOLING TUTORIALS for Inventor 2014. My O/S is Windows 7, and my Graphics card is a Gforce GTX 570, so I know my equipment is up to doing these tutorials. But, every time I click OK to start the pattern in the section "Patterning Mold Assembly Components", I get a message saying "Pattern (not responding)". I have tried and retried at least a dozen times to be sure I followed all instructions to the letter.
AutoCAD has been working on my laptop for many months. All of a sudden when I start AutoCAD and do the "open" or "new" command, the software says "not responding". If I set variable "FILEDIA" to 0 it prompts me for the file name. I have tried to repair, uninstall and reinstall the software and it does the same thing.
After installing all products within Building Design Suite Ultimate 2013 and/or Infrastructure Design Suite Ultimate 2013 I try to open AutoCAD 2013 and get the attached screen. It just grinds and try to open but always shows "not responding". I've read posts that suggest uninstalling and re-installing. I've done this several times. I've used the Microsoft Fix-It engine to completely erase from the PC. I have even just installed the AutoCAD portion and it will not open. Each time I reinstall it asks me to supply all proper credentials, product code, etc. It shows green check marks so I know my codes are correct.
I've tried opening other programs and the only successful one is Revit. Am I to point the start-up of the programs to the licenses or something.
So, I've had CorelDraw X4 for maybe two years now. Everything has always worked fine.
Now, I can't get it to open new documents, and when it says it's "processing" to open old documents.. It doesn't really make any progress, and nothing every opens.
I can get AI to start up however when i try to open a file from my HD, AI stops responding. Ive tried to open with the 32bit version too but same thing happens. Im on Windows8, 3rd gen i3, 6 ram, intel HD4000 internal graphics card.
About a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
When I close Illutrator CS5 the application hangs and the windows "this application is not responding" message appears. I have now seen this on 3 different PC's (including a Desktop, Laptop and MacMini Server) all running Windows 7 64bit.Here's the Event log details:
blender tool? I have logged out of illustrator and started a new document but it is still not working. I am trying to blend two triangles, I have amended the blend options to 'specific steps' at 30 but when I go blend - make nothing is happening?
When I try to change someting on an Illistrator document, It stops and says "not responding". I have rmoved the entire program and reloaded it, with no change.
I was working on a file this morning and saved it in .Ai format. This afternoon I came back to work on it again and now it won't open. Illustrator hangs, and then stops responding. Is there a way I can fix this?
I got a shape locked on the screen and can't unlock it.It is just a rectangle with 2 rounded corners. It has a strange shadow... I don't recall doing that shape ever, I was switching among Illustrator and Photoshop and in a second it just appeared.I tried many alternatives but still can't get rid off it. It is in every new file I make. It doesn't respond to zoom in/out. If I switch to outline view it stays the same, even with the shadow.I recorded a video.
Illustrator CS4: My arrow keys do not function with the polar grid tool. I cannot increase/decrease the number of rays or circles using my arrow keys. They are just dead in the water.
I'm having a problem with my recently installed copy of PS CS6 (with the latest update).
My system: PC with Intel Core i3-540 (not over-clocked: 3.06GHz) and 4GB RAM running Windows XP SP3. The graphics card is an ATI Radeon HD5450.
The problem: When I first launch Bridge and CS6, everything is working fine. But after 10 minutes or so, ACR starts acting up. Specifically, edits become increasingly sluggish and ultimately the image won't transfer into PS. Instead, I receive the message: "Could not complete the Open As command because there is not enough memory (RAM)".
I do not have any other programs open (aside from Bridge) when this happens.I would have thought that 4GB of RAM would be a sufficient amount of memory.
I am not using the boot drive as the PS scratch drive.
Two more bits of information: (1) I have the Memory Usage slider set to 80%; (2) Cache value is 1,024.
Using Photoshop CS6 (13.0.1) on a Mac Pro OSX v 10.6.8 it is no more possible to switch through open image windows with the OS related key combo "command <". There is also no Photoshop own configurable command available, that could solve this issue. CS5 or versions below always allowed that, and I very much miss this practical and fast switching between images, much faster then having to maneuver down through the "windows" menu.
I am having a problem with AutoCad 2013 crashing. While running the program when I use the open command dialog box if I re-name a file, create a folder, or copy a file autocad goes unresponsive and crashes immediately afterward. I have installed the service pack and update my video card driver trying to fix the problem. I used to be able to perform everything mentioned above in AutoCad 2010 without any problems. I don't think its my computer causing the problem because everyone else in my office is having the same issue with 2013.
Upgraded to LT 2013, and I've noticed that when I click open, CAD brings up a folder that I was working in the previous day or even the week before. I've created shortcuts to get back to the folder I need to be in, but it is not the current working folder (apparently). This is also the case for xref's (when I go to attach a new dwg file).
Even after I change to the folder I want, and open a drawing from that folder, CAD reverts back to a folder I was in the day before.
When I start CAD, I use a shortcut icon that runs a startup script - so I'm not opening a drawing to start CAD, I actually just Start CAD from a shortcut to the program file.
I am running Autocad 2014 on a Windows 7 machine. Everytime a use the open command Autocad appears to freeze. I can clear the freeze by hitting the escape key. The only way I can open drawing files is to use windows explorer and click on the file I want to open.
My Autocad Civil 3D 2008 crashed and when I restarted it and tried to open a drawing the file open or save as just brings up text in the command bar asking me to specify the name of the drawing to open. Where have my opo up boxes gone? I have had this problem before and found a code to type in which restored it but now I can't find it.
the user is running C3D. He can only open a drawing if its in the previously open files list or he can open with Explorer. If he clicks the open toolbar or selects open from the menu or even types it at the command prompt, nothing happens. It seems to be trying to do something because the command prompt doesn't come back unless he escapes. If he instead hits enter, he gets a message that says it can't find the file specified - even though he never got a chance to specify anything. It's not FILEDIA and he has rebooted. It's also not hiding the open dialog box behind the acad screen.
I've been using Photoshop Elements 10 since early August and it's been working well.
However, since yesterday, when I use the File/Open command in Edit to get a new picture, I no longer see thumbnails, just a graphic of an orange flower. The pictures (mainly JPEG with some RAW/NEF) still open fine and if I single click one of the orange flowers I get a preview at the bottom of the Open screen. However, this is far from convenient. FYI, I usually work set to "large icons" but I've tried all the different size settings.
FYI, I've recently bought a new computer with Windows 7 Professional 64 bit and reinstalled PSE10. However, all was working fine immediately after the change of computer and the lack of thumbnails has only just started.
We have our options set to Auto Publish on Save (Autocad 2011). On some of our stations, the PDF will pop up automatically. This is what we WANT to happen. On other stations, the pdf has to be found and then opened to make sure it is correct. (this step, which is apparently way to difficult for some people, is not being performed, leading to extra work/time later to complete the project) I had everyone ensure their DWGtoPDF.pc3 custom properties was set to "open in PDF viewer when done" (and when they do a straight plot, it does come right up) It just wont do it when its thru Auto Publish. Mine is one of them that comes up just fine....I have looked at every setting I have and tried to compare with theirs, but it all looks the same.
I would like to use the Bash command line to open two images into GIMP, each image on a layer. The code below opens the two images into separate GIMP windows.
>> gimp image1.jpg image2.jpg
How can I open the two images into one GIMP window and two layers?
I don't understand why the right click - open drawing command had to be put in a submenu. Is there a way to customize the commands on these right click menus other than the marking menu? I don't really like the marking menu, and I don't want to put it there. There was nothing wrong with where it was... There are so many commands in the basic right click menu that a good majority of inventor users don't use. At least give us the ability to customize this.
