I found a solution to my objects being rendered incomplete by adjusting the perspective angle by a degree or two but this didn't solve my problem of the graphic map being incomplete.
Basically I'm making labels for different sized bottles (i.e. wine, beer and sake)the wine worked so far but for some reason this sake bottle's label wouldn't complete rendering.I dunno if it is because the side of the bottle is slightly angled or what but I cannot get it to complete the image map.
I'm trying to open a document that says "LTUnivers-BasicBlack is missing". I have a font called Univers LT Std on my system. How can I tell Illustrator to use Univers LT Std wherever it sees LTUnivers?
Basically I am trying to map a world map vector (symbol) onto a 3d revolve half circle in Illustrator. The problem I am having is that the quality of the map vector is significantly reduced when mapped on the 3d revolve. Is there any way I can have it keep it's "full" vector quality or is there something else I am missing.
3D Revolve Vector: [URL] ....
Actual Vector: [URL] ....
So why the loss in quality and how can I prevent this?
I'm learning from the official books for Adobe Illustrator CS5 and I found that the 3D view CS6 I always crash. CS5 works without problems. See the video here: [URL]
File is here:[URL]
Can you confirm that the error is not only me, but that's really wrong version CS6? Specifically, I use 64-bit version.
I have created an envelope mesh over a photograph of a face and I wish to map a pattern onto the mesh so it looks like a face. (none of the original photographed face needs be visible).
I'm away and on a colleagues Mac ( OSX 10.6.8 ) Running Photoshop CS5 and Illustrator CS6.Doing a little artworking for them. When I fired up Illustrator... the font mapping on the keyboard is screwy. Type an A, get a K etc...The settings on both the Mac and Illustrator are set up for British UK. Photoshop is fine, as is the Mac.Only Illustrator is acting up.
I have created a 3d object to look like a coffee mate carton. I tried to post images on here but I keep getting an error.The art work that I want to put on my object consists of a number of elements which have been saved as a symbol. (image) However whenever I try to map it to my object nothing happens. I have used some of the system symbols and these work fine. I have also made a simple label of text only and this works fine. Is there a problem using more complex symbols in this way?
Here is the image I am working with URL....The words coca cola are in red in my design and whenever I add it to 3d mapping it red it no longer red but transparent. The stroke is grey on the bottle.
I have simple a 3D bottle shape created from about 16 points and I am trying to map a gif image on to it usning CS5. No matter what I have done (work from a new document, etc.) I always get the error message. I also receive this error when I attempt to map a jpg image on to the same shape. I have attempted this on three different Windows 7 machines running CS5 with the same result. When I try it with CS6 the program closes with a catastrophic error and no message. I do not receive this error using the default symbols. The gif and jpg images are imported and imbedded into the document and then moved to the symbols library.
I have an interactive board with tools (such as pen or eraser) which I want to integrate with the AI. The typical scenario woulld be as follows: the user lifts the pen from the tray, the pen event will me mapped into selecting Pencil Tool from AI toolbar after which the user can add freehand annotations to the AI document.
Is there an API which would allow me to map abailable hardware tools with relevant AI tools? Is there an example which would demonstrate such integration?
An automatic update from Adobe failed on my computer this morning. Here's the message I got:
The update cannot be applied to the product. Please re-install the product and try again. Flash Lite 3 Update for Device Central CS3 failed to install.
In the CS3 family I only have Photoshop. I have the CS2 Suite and Lightroom 1.3.1 installed. Do I need to reinstall PS or LR to get the update?
I have Photoshop CS3 and when I open the brushes palette the only brush options I have is Master Diameter. Can anyone tell me how to turn the spacing and hardness options on?
When I try to open a large (98MG) tiff file in PhotoShop, I get the following message: "This file may be damaged (the file may be truncated or incomplete)." When I continue, the image appears with a blue line through it. I am, however, able to view the file using Microsoft Office Document Imaging, and the image is perfect.
I upgraded to LR 5.3 RC .. as I have a D610 .. but i noticed that it does not offer the full list of profile that the D610 offers .. I use Camera Standard as that is what the default on the D610 is ...
On opening a photograph in CS6, the image is incomplete.
I have just installed Photoshop CS6 (hope I'm not going to live to regret this), apart from the problems with installing plugins, when I open a file the image is incomplete with anything up to 25% of the image missing. If I create a duplicate background copy the problem is resolved. This is not satisfactory on software of this nature.
I am not the most technically savvy lady so I might have made this issue worse.
After I first installed the Creative Cloud and downloaded Photoshop, I attempted to open the program and it said "file is incomplete or damaged".
I tried deleting it out of the applications in the side folder to re-install thinking it would get rid of it but the tab is still there.How do I delete Photoshop to re-install? Is that possible?
I have one corridor with several baselines. I have asked it to generate a corridor surface but it has left out several baselines from the surface. I have ruled out assemblies. I am not sure what is going on. I am also unable to get feature lines from this portion of corridor as well. The corridor builds just fine and I can see what the daylight lines are etc. What's going on. Yes I have audited the drawing.
I am trying to produce a section view of a vessel. Inventor makes the section just fine except it is incomplete. See images below:
In the past when I have encountered this issue I would simply locate the part in the browser, Right click on it + Section Participation + section. That usually solves the issue. This time it is not working.
I am using the Mill&Overlay sub set to overlay an semetrical road and a crown offset of zero. I one file the crown point feature line has gaps in it and in another file it zig zags along the road.
I forgot to mention that the triangles and the cross section look as expected. trouble is I want the crown profile
Civil 3D 2012 & 2013 HP Z210 Workstation Intel Xeon CPU E31240 @ 3.30 Hz 12 GB Ram 64 Bit Win7 OS
"Unknown value "AC1027" encountered in drawing version.Invalid or incomplete DXF input -- drawing discarded. Press Enter to continue." (then the file disappears)
MY workflow:I am opening up DXF files created by me with RASPLOT 2.5 and RASPLOT 3.0 (an Army Corp of Engineers Hyrdraulic model extraction program) I bring the DXFs into AutoCAD for better cleanup of the 2D graph it creates of flood profiles.
OBSERVATIONS:Others in my office have opened the same engineering models in RASPLOT and been able to bring DXFs into AutoCAD 2011/2012 in with no problem. It had worked for me in the past, but I can't recall what happened to all of a sudden make it not work, EVER. My co-workers can work with the RASPLOT DXFs in Windows XP and Windows 7.
ATTEMPTED SOLUTIONS:-I upgraded my RASPLOT version first from 2.5 to 3.0, then upgraded my AutoCAD2011 to 2012. No change.
-If I create the DXF on my computer, then open it remotely from another computer's AutoCAD, I still get the same error message. (My only solution has been to create my DXF by remotely logging into another computer with RASPLOT then it will open in my computer's AutoCAD.)
- I tried changing the .dxf file path to .dwg but that doesn't work.
I received the drawings with comments from consultant.The cad drawings are infected with stamps.I was ordered to use such drawing to update the routing of the services.When I use DXFOUT to change it to the DXF version 2000.I can't open it the dxf drawing.the error like below when i tried to open the dxf:
Undefined shape 4 Invalid or incomplete DXF input -- drawing discarded. Press ENTER to continue.
I get the above error message when i try to open a DXF file which was exported from LSS. The survey data from TPS seems to export fine, but the GPS data won't open.
I've read the previous posts on this error messages, but most seem to be relevant to autocad 2007. However tried the remedy suggested (through MS word) but that didn't work.
I had to restore images I deleted off my SD card and when I uploaded them into LR they appear whole in the scroller at the bottom but when clicked on, some have large chunks of the image missing. Is it possible to restore the WHOLE image?
The attached part, created in Inventor 2012, has a formula for the number of occurances in a sketch pattern based on its length. When this number changes due to a length change, some parts of the sketch do not reposition and Inventor does not indicate that an update is required. The part can be fixed by dragging the affected geometry or performing a rebuild all. The following image shows the result when the length changes from 300 to 500.
The Publish to PDF option in the Sheetset Manager which I believe is using the native/built-in AutoCAD 2012 PDF driver is creating PDF's with incomplete and inconsistent graphical content. See attached PDF examples wherein the PDF "...(CONTENT GOOD)" created via CutePDF Writer contains the desired output...
Note both PDFs were plotted with essentially the same plot settings, driver excepted...
