I had to restore images I deleted off my SD card and when I uploaded them into LR they appear whole in the scroller at the bottom but when clicked on, some have large chunks of the image missing. Is it possible to restore the WHOLE image?
View 1 RepliesThe original files are gone, deleted accidentally. But my LR3 catalog still has full size previews of all of them. Is there any way to convert those previews into photo files (dng or jpg would be fine)?
Â
It seems like this should be possible - I can see the images right there on my screen, so they can't be gone for good!
Â
The deleted photos comprise an entire day in Venice, Italy, and had already been sorted into keepers. Even if I could only get a medium sized jpeg, it'd be better than nothing at all.
I'd like to resize a large batch of images to a more manageable size. I shoot a lot of weddings and find when shooting with my Nikon D800, the files are enormous when shooting Raw. Until now I would export all my vertical images first to a folder and then the horizontal ones and then resize in photoshop to say 11x17. Is there a way to resize ALL my images before I even bring them into photoshop? I'd like to resize them all (both vert and horizontal images) at one time. If I select the batch of images I'd like to resize, and them click export, it takes me to a menu which gives me the option to resize. I just don't know what settings I should use? Can I just click width and height and punch in say 11x17 and leave it at 300dpi? I want to preserve the aulaity for print purposes but reduce the file size so it's manageable for both my client and me when I then go into Photoshop to edit.
View 8 Replies View RelatedExporting large file sizes. In short I'm trying to export some images for large format printing but am having trouble preparing the right size in LR4.
Â
Specifically I'm trying to produce w 30" x h 20" images. I understand that to do this I'll need a image that is 9000 x 6000 pixels set at 300 ppi. My problem is that when I export this, with the dimensions set to width and height in pixels and resize unchecked LR4 produces an image that is 9000 x 4887?
Â
what i'm doing wrong here? Is it simply that the aspect ratio of image is wrong to produce this size image? My concern is not producing an exact file size for printing.
Using Lightroom 4.3 on OS X 10.7.5 (Mac Pro with 24GB of RAM) I'm having problems stacking sets of images. The groups of images I'm stacking can range from 50 to 1400. No matter the size, stacking a group of images stalls and I have to quit Lightroom. At best I'll stack one group, quit, restart and move on to the next group. The stack doesn't show before quiting, but appears to be stacked on restart. If I'm lucky I can get a few sets of images stacked before things devolve into this dysfuncitonal cycle of stacking, quiting LR, opening LR, confirming stack is complete and stackin a new set of images. Is this a known bug? Any fixes to get past this? I'm working through 15000+ images to edit and organize for a project of mine. The total image total is higher, but I've stopped collecting images in LR for this project until I sort out this problem.
View 8 Replies View RelatedWhen I move a selection of image files from one folder to another within lightroom there is always an error with at least one image and it doesn't make the move and is left. I can then reselect this image and then move it again.
View 3 Replies View RelatedI would like to be able to export large numbers of images at a time with the same size, compression, etc. and be able to save these export settings so I can use them again. Does LR have this ability? What is it called?
View 1 Replies View RelatedAfter uploading images from a card reader to LR 4.1 and 4.2, the option to review large images is present for the first 10-20 photo, then LR preview will only display a small image (the size of a thumbnail.). I can uplaod all the images from preview to the LR catalog. But then I have to go into the catalog and delete unwanted images.
View 5 Replies View RelatedI have created 2 web galleries--one html and one Flash. I saved them to my local drive and they work perfectly. Then I uploaded to our server (I checked to see that all folders/files made it, and they did) and then when I access the index.html file, neither the thumbnails or the full-size images show. Here are the two URLs
FLASH: [URL] .......
HTML : [URL] .......
My catalog in Lightroom 4 is spread over several hard drives and broken into years, with subfolders holding each seperate shoot. I recently replaced the harddrive that only held 2009 with a 3TB drive that should be able to accomodate 2010,2011 and 2012. I would like to move those files onto that drive within Lightroom so that it tracks where they are.Â
View 2 Replies View RelatedI seem to have deleted my lightroom back up from the HD but was able to restore (lrdata).
Â
Problem is that now it seems blank.
I upgraded to LR 5.3 RC .. as I have a D610 .. but i noticed that it does not offer the full list of profile that the D610 offers .. I use Camera Standard as that is what the default on the D610 is ...
View 1 Replies View RelatedWhen exporting DNG files as JPG the file icon doesn't show a complete picture. Perhaps 2 out of 25 files will be affected.
View 8 Replies View RelatedI am new to lightroom, I was playing around and clicked a button at the bottom of the screen and now it has locked me out saying my images are missing or offine line
View 1 Replies View RelatedI somehow renamed my Lightroom Images folder. All the images are now under a new name that Lightroom does not recognize. When I go through the regular steps of "Locating the missing images", I seem to be able to do it one image at a time.
View 9 Replies View RelatedIn lightroom 4 when I import images it does not show all the images in the folder. I have deleted the folder from lightroom and attempted to reload it. When I did it had the same problem it did not show about half or the images in the folder. I went back to the folder and check all the images and could not find anything wrong with the images.
View 9 Replies View RelatedI plan on getting a larger storage device for my Mac to accomadate my growing image files. When I install this device, and transfer my images to it, will Lightroom show these images as "missing"? If so, how would I correct that.
View 2 Replies View RelatedLightroom3 has all my images marked as missing or off-line. Recently I have been able to recover them by re-powering the external hard drive (Seagate 1tb) but this no longer works. The external drive is recognized by the 3 computers I have tried.,
View 2 Replies View RelatedFired up my computer today after sitting idle for a few days. All 50,000 images are showing "offline or missing"
Everything was fine two days ago.... What happened and how do I get them all back? Images have not been moved at all.
I'm now switching from Aperture to Lightroom. But now I've big troubles with my geotagged images (+40'000) I export my photos with a seperate XMP files. In Bridge is see the GPS-Tag but when I import the photos in Lightroom then the location isn't imported!
Â
Why isn't the GPS-Coordination not included?
I have about 9000 missing or offline images according to my Lightroom3 software.
However, they're not! I can see them in the folders on an external drive where Lightroom says they are not. When I try to reimport them, Lightroom says they are already there, doubly confusing?!
How to get them back in my Library so I can use them.
All my images have a bar across the top which says 'the file name is missing or offline' this is on the screen.
View 3 Replies View RelatedI had to move my cataolgs from one external HD to another, but when I open a catalog the images are missing. I know my original images are stored in one place and the catalog is stored in another. Shouldn't the images be found if they are all on the same HD?Â
View 1 Replies View RelatedThe option to edit in Photoshop CS4 from Lightroom 4 and return is just fine. However, the option to Open images as layers in Photoshop is grayed out as well as the option to open as Smart Object or Merge.
View 4 Replies View RelatedIs there a way to split a really long video into 10 minute chunks during export? I know I can do this post export with other software, but I would've thought it could be doable straight in Premiere Pro (using CC).
View 5 Replies View RelatedI am new to PSE and I am experimenting. Recently, for no reason I can fathom suddenly when I open a jpg or png file and select the smart bruch as I start the selection process greatt rectangular chunks are omitted (marked out by the dashed lines) which I cannot select. What am I doing wrong??
View 1 Replies View RelatedElements 7. Without my opening, moving, renaming or otherwise molesting them, 2/3s of the photos in one of my two catalogs have suddenly gone missing. I have exhausted all the trouble shooting info I can find online and have tried the reconnecting procedures, optimized the catalog, repaired the catalog, rebuilt the thumbnails and uninstalled and reinstalled elements 7 all to no avail. The missing files, a mix of jpeg and nef totaling 272, are grouped in one block starting from the first photos I ever downloaded two years ago except for one which is a recent download. Elements 7 win xp 1G ram.
View 5 Replies View RelatedA work mate here at sometime or another clicked on the "always perform my current choice" check box when the "Hatch - Large, Dense Hatch Patterns" dialogue box appeared.
Question is, is there anyway to reset this so the dialogue box comes back up?
I'm using Photoshop CS6 to assemble and export a series of extremely high-res tiles. Long story short, they will be used to make up a large map in a mobile app.
Â
I have a pretty tight deadline and I've just been stopped in my tracks by an error I get when I try to scale them up.
Â
Each tile is a layered PSB file, 16384 x 16384px at 72dpi, about 2-3GB in size. All I want to do is scale them up to double their size - 32768 x 32768px.
Â
When I try to do this, I receive the error, 'Could not complete the Image Size command because the result would be too big'.
Â
What exactly does this mean in terms of size (filesize or pixel dims)? What's the problem?
Â
Since I'm working in PSB format and I'm resizing within the bounds of the 300,000px limit, I don't understand why I'm not permitted to scale up to 32768px.
Â
I need to preserve the layers as Smart Objects in order to upscale them... so no flattening.
Â
All I can think of is splitting the files into smaller tiles (I currently have 28 tiles to upscale).
This is probably a basic one for most people, but I'm pretty clueless... I've got a fairly large image (3000px) that I need to scale down to 500-ish px. How do I best go about doing this without getting that awful 'halo' effect? I've tried gradually scaling down without much success.
View 5 Replies View RelatedI'm currently working on a huge image and remembered that a version of Photoshop used to have the function that would allow you to open one section of a huge image at a time to work on. From what I can recall you used to go to open the image and a Navigator looking window would pop up and you'd choose which area of the image you would like to work on, click ok and it would load just that area. Is this feature still around?
View 5 Replies View Related