I somehow renamed my Lightroom Images folder. All the images are now under a new name that Lightroom does not recognize. When I go through the regular steps of "Locating the missing images", I seem to be able to do it one image at a time.
View 9 Replies
I need locating the missing files within lightroom. When I click on the question mark to locate the files, it opens up a window and I click locate, and then the files are no longer there. This happens even on files that I have not moved out of lightroom. How can I make all of my files appear as they used to?
View 1 Replies View RelatedI am new to lightroom, I was playing around and clicked a button at the bottom of the screen and now it has locked me out saying my images are missing or offine line
View 1 Replies View RelatedIn lightroom 4 when I import images it does not show all the images in the folder. I have deleted the folder from lightroom and attempted to reload it. When I did it had the same problem it did not show about half or the images in the folder. I went back to the folder and check all the images and could not find anything wrong with the images.
View 9 Replies View RelatedI plan on getting a larger storage device for my Mac to accomadate my growing image files. When I install this device, and transfer my images to it, will Lightroom show these images as "missing"? If so, how would I correct that.
View 2 Replies View RelatedLightroom3 has all my images marked as missing or off-line. Recently I have been able to recover them by re-powering the external hard drive (Seagate 1tb) but this no longer works. The external drive is recognized by the 3 computers I have tried.,
View 2 Replies View RelatedFired up my computer today after sitting idle for a few days. All 50,000 images are showing "offline or missing"
Everything was fine two days ago.... What happened and how do I get them all back? Images have not been moved at all.
I'm now switching from Aperture to Lightroom. But now I've big troubles with my geotagged images (+40'000) I export my photos with a seperate XMP files. In Bridge is see the GPS-Tag but when I import the photos in Lightroom then the location isn't imported!
Why isn't the GPS-Coordination not included?
I have about 9000 missing or offline images according to my Lightroom3 software.
However, they're not! I can see them in the folders on an external drive where Lightroom says they are not. When I try to reimport them, Lightroom says they are already there, doubly confusing?!
How to get them back in my Library so I can use them.
All my images have a bar across the top which says 'the file name is missing or offline' this is on the screen.
View 3 Replies View RelatedI had to move my cataolgs from one external HD to another, but when I open a catalog the images are missing. I know my original images are stored in one place and the catalog is stored in another. Shouldn't the images be found if they are all on the same HD?
View 1 Replies View RelatedThe option to edit in Photoshop CS4 from Lightroom 4 and return is just fine. However, the option to Open images as layers in Photoshop is grayed out as well as the option to open as Smart Object or Merge.
View 4 Replies View RelatedI had to restore images I deleted off my SD card and when I uploaded them into LR they appear whole in the scroller at the bottom but when clicked on, some have large chunks of the image missing. Is it possible to restore the WHOLE image?
View 1 Replies View Related[URL] How-to-programmatically-find-all-references-xref-dwg-jpg-pdf-OLE/m... I have a jpg file that I needed to apply some transparency to and saved it as a png file. I now want to delete the jpg file from the folder but it's being referenced in several drawings, and I don't know which ones. Is there a way to reverse the function of Reference Manager (perhaps with a different app), ie find all the drawing files that reference my jpg file
Intel i7 3.33Ghz, 16Gb RAM
Nvidia Quadro 2000D
C3D 2012 SP4, holding off on C3D 2014
Win 7-64
locating smart brush in photoshop CC. have worked occasionally w Photoshop 11 but cannot seem to find this same tool on Photoshop CC.
View 3 Replies View RelatedHow accurate is the Document Properties information. I have several files that report containing various fonts only I can't find the fonts in the documents. What's the best way of locating particular fonts within documents. The Find dialogue is tedious to use given that we need to manually move from one page to another. Is there an alternative?
View 9 Replies View RelatedI seem to have accidentally animated Exposure Value (located within the Exposure Control).
I don't know how to eliminate the animation and even though I try to manually reset the Exposure Value by turning of Autokey and then setting Exposure Value to the setting I want, I keep encountering a persistence of the animation.
What I mean is that I might reset the Exposure Value to zero, but then when I scrub the track, the Exposure value starts to change. I cannot figure out how to fix this as no matter where I reset the Exposure Value, when I scrub back and forth on the track, the Exposure Value changes to other values...
I've tried looking in the Curve Editor, but haven't been able to find keys. I also don't see any keys in the track.
I run into the problem where I copy from one project to the next to save time, also from templates and what not. Well there isn't really a uniform nature to my drawings as i started doing them under necessity rather design.
So, i try to delete duplicate layers.. or Layer's and it continues to give me errors... stating every time:
The following layers cannot be deleted:
Layers 0 and Defpoints
The current layer
Layers containing objects
Xref-dependent layers
Well, its not Layer 0 or Def Points, Its not the current layer and i even deleted all pages except the one mandatory and CTRL+A - DEL... Zoom extents on model and do the same thing, and i cannot get rid of the layer....
How do i get rid of the pesky layers? Can i type a command that changes all XXXX layer to XXX layer and can dump the ones into such as "0" layer and be unconcerned about it freeing it up to delete the unwanted un used layer?
I can't seem to locate the 0,0 (ORIGIN) in Model space.
SCENARIO 1:
I create a line > specify second pt to 0,0 > Enter = NADA
SCENARIO 2:
Create a Line > Select Line > Move to 0,0 = NADA
HOWEVER, If i create something, use COPY BASE command, and and specify 0,0 --> PASTE into new drawing with 0,0 as insertion point, it can locate it... so it's there.... i just can't find it.
There are no Smart albums displayed. nor is 'create new smart album' displayed as an available option when I click on the + Album button. When I try to create a new album 'last 6 months' (which I know was pre-created as a smart album in a previous version of element) a warning message that this album already exists is displayed, but I can find no way to locate this smart album or create a new smart album? Is my newly downloaded Elements 11 corrupted in some way, or are the smart albums just hidden and need making visible in some way?
View 2 Replies View RelatedAny way to locate where text styles are located within a drawng. I am creating templates and some text styles are being carried from one template to another when I create them and I would like to delete certain text styles. I have looked around the drawing, but cannot seem to locate them.
View 9 Replies View RelatedIn a 2D drawing I want to arrange model space objects in a pviewport such that a specific model space point is in the center of the pviewport. I'm manipulating the pviewport properties to try to accomplish this. To have the view perpendicular to the model space XY plane, I've set the pviewport direction property at 0,0,1 and am varying the arrangement of model space objects with the pviewport target property.
When doing this by hand, I use the DVIEW command and the POints option to set the camera and target. The model space point I want in the center of the pviewport is 16.25,11.5,0. In the DVIEW command, POints option, I set target to 16.25,11.5,0 and camera to 16.25,11.5,1.
When attempting to do this with a macro I'm not finding any obvious correlation between the pviewport target property setting and the location of the desired model space point. Below are the lines to set the target property in a pviewport called PVPort created in previous steps. When I set the target property to 0,0,0, the model space point 45.3541, 17, 0 is in the center of the pviewport. When I set the target property to 16.25,11.5,0, the model space point 61.6041,28.5,0 is in the center of the pviewport.
If the pviewport has a twist angle of a scale not 1.0 (and therfore a different model space point I'm wanting in the center of the pviewport), it gets more confusing.
Dim VPP(0 to 2) as Double
VPP(0) = 0: VPP(1) = 0: VPP(2) = 0
PVPort.Target = VPP
I had some inaccurate survey points in my EG. Now I have new points and breaklines. How to locate thes old breaklines either within the list or visually within my surface editing / style.
The zoom to doesn't work as there are many breaklines within the zoom extents, and 1000's of breaklines to sift through. Is there a setting somewhere in the surface where i can turn on the breaklines that have been added already to something that's visible so i can delete those out of my surface?
I'm looking for anything on this one. (Not the obvious answers thought). Delete all and replace all (not happening).
I'd like to place a point at a specific "Z" level on a line. The line is not perpendicular to the x~y plane. On the attached .dwg, say @ z+.750 on one of the angled lines on the "constraints" layer.
0699 Cadtutuor.dwg
I am currently updating a title block and it will be wider than the original. This is going to cause me to move the block.
How do I get it constrained back into the lower right hand corner? I wouldnt think this would be this difficult of a thing to accomplish.
LR states that my photos are missing, but none of my photographs seem to be missing, ie, there are no question marks and all photos can be found, edited, and exported in the normal fashion.
View 2 Replies View RelatedI am wanting a piece of info that I cannot seem to locate in the spur gear generator. I will post a picture when I have a chance, but what I am looking for is the 'W' figure (distance over 'x' number of teeth at the pitch line). What I have is a 19.xxx deg. helical gear so the best way to get this info is calculate it, but again, I dont see it in the inventor calculation.
Inventor 2014 PDS
I'm having trouble finding a system variable.
I have blocks in a drawing that were made using the 'retain' method. WHen I go to insert the block I cannot see the block preview at the crosshair cursor. The block only becomes visible once I have clicked the left mouse key at the insertion point.
This means I can't rotate it either as I can't see it until I have clicked to place it.
Which system variable (And what setting) will allow me to see the block as I'm inserting it?
I have a block of two bent steel plates that are bolted together.. Everything works just how i need except the "limits" on the connecting bolt assembly. The plates we use are slotted, and depending on the angle of the bend, the range the bolt can be in changes. I can set a distance parameter on one clip or the other, but have no way of linking the two. I have a trig function i could use if you could put one with variables in the min or max of a dimension, or i think i could do it if i could limit a point to stay on a line. I can put a coincident constraint on it, but the point will go past the line infinitely, if that makes sense. Relatively new to these blocks, and self-taught as it is.
View 2 Replies View RelatedAfter upgrading ACA2012 to Autodesk Building Design Suite (which still includes ACA20012)
The grips on images to resize them to a rectangle for example no longer appear.
The grips still appear on other entities such as lines, circles and rectangle still appear.
Driving me potty as it still works on the systems where this upgrade hasn’t been applied yet.
It’s not drawing specific as this happens on all previous drawings opened on the upgraded machines, but not on the none upgraded.
Using the scale function to reference points at the moment as a very much longer work around, but would like it back the way it was.
I have several overlapping catalogs in my elements 10. The largest is coordinated with the online backup (which is due to be terminated). It has over 400 missing images that cannot be reconnected via the online backup. Some of the wayward images may be in one of the other catalogs or a download to the external hard drive from the online backup (done last year).
1. How can I merge the several catalogs, and should I?
2. How do I search the the file in the external hard drive? I.e., how do I designate this file in the "browse" dialogue box for where to reconnect? I can navigate to it, but then what?
