How accurate is the Document Properties information. I have several files that report containing various fonts only I can't find the fonts in the documents. What's the best way of locating particular fonts within documents. The Find dialogue is tedious to use given that we need to manually move from one page to another. Is there an alternative?
View 9 Replieswhen i click the fonts list documents fonts not showing in corel 12
View 8 Replies View Relatedfonts withs parts of letter missing in a few fonts when sent to cut/plot
View 10 Replies View Relatedis this possible to make it default for the all the documents of coreldraw something like gray tone despite of white. option existed in the options command but i have to go and has to choose the color. Its not like that, at once by default that white color is changed to the gray tint.
View 5 Replies View RelatedIs there a way to increase the number of documents shown in the Windows menu? Sometimes I work with more than 9 docs and it's a pain navigating to and from "More..."
View 3 Replies View RelatedI have several multi-page X6 documents, all with the same layout (chapters of a booklet), which I would like to combine into one document. Is there an easy way to do this?
View 13 Replies View RelatedI just wrote about the crash on scroll. Now when I try to open the file draw goes through the motions of opening it and end up with an untitled document. The entire file has been destroyed. I've had this kind of trouble before but not since I upgraded from Windows XP to Windows 7. It makes Draw almost impossible to use since any action even saving might trigger a crash and with the crash comes the possibility that the file is lost. Does this behaviour was specifically addressed and fixed with any of the service packs? I'm still using the original build.
View 10 Replies View RelatedWhen working on a document with facing pages, with previous versions of CorelDraw htting the page up or page down keys on the keyboard would change to the next set of pages.
With Draw X5, you have to hit page up or page down twice to switch to the next set of pages.
Not a huge deal to hit it twice now, but is there a way to set X5 to the previous behavior where with facing pages one page down would take you from page set 1-2 to 3-4?
When trying to open a coreldraw document sent to me containing fonts that I do not have, I cannot seem to open only as curves and it always wants to replace missing fonts. I am sure I could do this with X3, but not X5.
I just want to import as curves and not substitute fonts.
When copying text from web pages to CDX6 it will often crash on paste. A workaround is to copy to Word first but I'd rather CDR worked properly. Is there anything I could look at within CDR to stop this from happening?
Version 16.2.0.998 on 64bit, Win 7.
I use CorelDRAW X4 exclusively (90%) for Laser work. I have a Page saved as Laser Page. It use to open with a 24 x 12 page area and Horizontal and vertical guidelines in place. It is set to "show guidelines."
However, every time I open a new document, the page layout and guidelines are not there. I always have to rebuild the page and add the guidelines. What has changed so that all I get is a blank page anymore? Or how to reestablish my defaults? I have re-saved it as my new default countless times but nothing sticks. It's a pain to have to always reestablish the layout I want to work with..
I have a problem with printing in X5. All the documents I've worked in X4when I print the X5 have a problem with the colors, they are not the same with X4.
Printing with: HP inkjet 110 A0Riso RZ370, RZ590 A3Epson inkjet 1400 A3Canon laser LBP5200 A4HP laser 1010 A4
We have an issue happening on many of the documents that we have that include a transparency or gradient. We did not have these issues in Draw12. (but did have printing issues)
1st issue: Opening these gradients will randomly flip them. Like so:
The bottom image is correct. Now when we print them from Corel Draw X5 to either of our printers (Bizhub C250, or Biizhub C360ps) we get the following (this is created from the same master file, same settings):
Notice the lens effect color replacement is gone, and the bottom gradient is barely visible, the top one not working at all.
Same document, saved to 12 and printed the same way:
Both sent with identical printers settings, same print driver, and as close as possible settings in the X5 and Draw 12 dialog print boxes.
Been running X6 for a month now. Updated to 6.1.
Things have been fine until I updated to 6.2.
I will create artwork in Corel Draw, save it and then export some elements out to another format.
Then I try to close the drawing and exit.
CANNOT DO EITHER.
I get an error that says 'Some of the documents could not be closed because some tasks..background. See status bar for....'
What the heck is going on here? I cannot close the file. I cannot exit the program. The only way to get out of Corel Draw is to end the program through Task Manager.
This update is bad news. I don't know how to go back to 6.1.
I noticed over the last few days that Corel was taking a while to open files. Like, if I had one open already it was usually fast enough, but if Corel wasn't open I'd get an error from the file manager I use saying it couldn't execute the program. Every time though, if I closed CorelDraw, and open a new instance of the program I'd be fine again.
Today has been different. Today I've had to restart corel practically every time I've tried to open a document. A few minutes ago I couldn't even get corel to open.
Right now where I'm at: I can open corel, I can change workspaces, but I can't open any file or even a 'new blank document' It freezes/hangs with the processing bar at about 80 %.
I'm going to try a restore point. I brag about how stable my system is, this makes no sense, I don't think it is a corel problem, I've noticed a ton of updates from Windows starting middle of last week. I just figured it would work itself out. I'll post every step I take. Oh, and by the way, I can open PhotoPaint Just fine.
I've removed update KB2853952 - Improvement only in that I can open corel, but can't open a new document or an existing document. I've done an F8 while starting up Corel Draw and reset to factory specs. No change. Deleted all 10,006 items in my temp folder. No change. System restore back to 9/10/2013 worked. Corel functions as expected.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
How to add my all regular usage documents as a templates. I tried in different ways to display my files in preview dialog box, but no use, only one file is appeared always that is only when the file exist in the desktop. How to display all of my fav. documents in the template preview when new from template command is used .
View 9 Replies View RelatedI"ve just recently upgraded to CDGraphics Suite X5 (from 12), along with Windows 7 and M.Office 2010. When trying to export jpg's I've got 2 problems:
a) Jpg files that I"m now exporting seem to have so many more "options" for exporting and are automatically exporting colours as CMYK. Some of the software programs that I use (for programming digital signage) require jpg files in RGB. Is there a way to set this as a default instead of having to change this everytime I export? (note that I have "checked" the embed colour profile option for my US Web Coated Pantones).
b) The default for exporting is also set at "custom" - should I always be changing this to either medium or large, or can I just leave it at custom. Often I am just emailing jpg's for approval purposes, so I don't always need large file sizes. Does custom set it to the largest possible file size?
I found a tab at the top of the export window that says "Load Presets" and lists for example "low quality jpg.xml" what is this for?
c) when I look at my jpg files in my documents folders they appear "locked" with a little lock on them. Old jpg files created in CD12 don't have this little "lock" icon on them. I have checked the properties and see that these files give full access for modification etc, so I can't figure out why they may be locked.
[URL] How-to-programmatically-find-all-references-xref-dwg-jpg-pdf-OLE/m... I have a jpg file that I needed to apply some transparency to and saved it as a png file. I now want to delete the jpg file from the folder but it's being referenced in several drawings, and I don't know which ones. Is there a way to reverse the function of Reference Manager (perhaps with a different app), ie find all the drawing files that reference my jpg file
Intel i7 3.33Ghz, 16Gb RAM
Nvidia Quadro 2000D
C3D 2012 SP4, holding off on C3D 2014
Win 7-64
My colleague just reminded me to one, very often appearing, situation - u get pdf with embedded fonts and u need that pdf opened in CD but don't have fonts?
View 8 Replies View RelatedWe just updated from Draw X3 to Draw X5 on our 64-bit machines. We have one problem...We have two Helvetica types with exactly the same name, T1 Helvetica and TT Helvetica. In X3 we could have both fonts turned on, and it would let us use both fonts. Now in X5 when we have both fonts turned on it only allows us to use the T1 font. I am able to use TT, but I have to turn off the T1 in Font Navigator. I have read a lot of forums and understand that we should not have both T1 and TT, but our former worker used both font types, and we have to often go back and fix old files.
Is there a way in X5 to have both T1 and TT fonts show up like we have in X3?
locating smart brush in photoshop CC. have worked occasionally w Photoshop 11 but cannot seem to find this same tool on Photoshop CC.
View 3 Replies View RelatedI seem to have accidentally animated Exposure Value (located within the Exposure Control).
I don't know how to eliminate the animation and even though I try to manually reset the Exposure Value by turning of Autokey and then setting Exposure Value to the setting I want, I keep encountering a persistence of the animation.
What I mean is that I might reset the Exposure Value to zero, but then when I scrub the track, the Exposure value starts to change. I cannot figure out how to fix this as no matter where I reset the Exposure Value, when I scrub back and forth on the track, the Exposure Value changes to other values...
I've tried looking in the Curve Editor, but haven't been able to find keys. I also don't see any keys in the track.
I run into the problem where I copy from one project to the next to save time, also from templates and what not. Well there isn't really a uniform nature to my drawings as i started doing them under necessity rather design.
So, i try to delete duplicate layers.. or Layer's and it continues to give me errors... stating every time:
The following layers cannot be deleted:
Layers 0 and Defpoints
The current layer
Layers containing objects
Xref-dependent layers
Well, its not Layer 0 or Def Points, Its not the current layer and i even deleted all pages except the one mandatory and CTRL+A - DEL... Zoom extents on model and do the same thing, and i cannot get rid of the layer....
How do i get rid of the pesky layers? Can i type a command that changes all XXXX layer to XXX layer and can dump the ones into such as "0" layer and be unconcerned about it freeing it up to delete the unwanted un used layer?
I somehow renamed my Lightroom Images folder. All the images are now under a new name that Lightroom does not recognize. When I go through the regular steps of "Locating the missing images", I seem to be able to do it one image at a time.
View 9 Replies View RelatedI need locating the missing files within lightroom. When I click on the question mark to locate the files, it opens up a window and I click locate, and then the files are no longer there. This happens even on files that I have not moved out of lightroom. How can I make all of my files appear as they used to?
View 1 Replies View RelatedUse merge for standard things like labels.Have a large ongoing project which requires
Lots of Excel data - eg: 6685.excel example.tifcolumns x AZrows x 300 upwards
All rows required to create a book of running information.
If I use a label type approach some rows have less data making the layout uneven (unsuitable for the project)
Is there a way to merge with a fluid result ?
Ie row one takes up 2 lines Row 2 takes up 5 lines Row 3 takes up 1 line etc
0728.excel example.tif
Some fonts are having issues on X6 that we didn't have with these same fonts on X3.Below is a sample of some fonts: Arial, Garamond, Nuance, Impact.This issue seems to be present in most if not all of our PCs.
View 1 Replies View RelatedI have certain fonts that are not showing up in BFN.
It happens on fonts that have a normal version and oblique version.
Only the oblique version shows up in BFN.
The culprit is security patch KB2753842 (12-11-12), in my case, in Windows 7, 64-bit, I have talked to Microsoft and reported this as an issue. In the meantime, hit a previous restore point and re-install all service patches except for the one above. Right click on the link to that patch and HIDE it. Then, update your antivirus and you're back to normal.
This also affects CorelDRAW X5 FWIW!
I can't seem to locate the 0,0 (ORIGIN) in Model space.
SCENARIO 1:
I create a line > specify second pt to 0,0 > Enter = NADA
SCENARIO 2:
Create a Line > Select Line > Move to 0,0 = NADA
HOWEVER, If i create something, use COPY BASE command, and and specify 0,0 --> PASTE into new drawing with 0,0 as insertion point, it can locate it... so it's there.... i just can't find it.
There are no Smart albums displayed. nor is 'create new smart album' displayed as an available option when I click on the + Album button. When I try to create a new album 'last 6 months' (which I know was pre-created as a smart album in a previous version of element) a warning message that this album already exists is displayed, but I can find no way to locate this smart album or create a new smart album? Is my newly downloaded Elements 11 corrupted in some way, or are the smart albums just hidden and need making visible in some way?
View 2 Replies View Related