Illustrator :: Mapping Artwork To 3D Revolve Object?
May 1, 2013
I have created a 3d object to look like a coffee mate carton. I tried to post images on here but I keep getting an error.The art work that I want to put on my object consists of a number of elements which have been saved as a symbol. (image) However whenever I try to map it to my object nothing happens. I have used some of the system symbols and these work fine. I have also made a simple label of text only and this works fine. Is there a problem using more complex symbols in this way?
View 3 Replies
ADVERTISEMENT
Aug 19, 2012
Basically I am trying to map a world map vector (symbol) onto a 3d revolve half circle in Illustrator. The problem I am having is that the quality of the map vector is significantly reduced when mapped on the 3d revolve. Is there any way I can have it keep it's "full" vector quality or is there something else I am missing.
3D Revolve Vector: [URL] ....
Actual Vector: [URL] ....
So why the loss in quality and how can I prevent this?
View 1 Replies
View Related
Dec 9, 2012
I am designing my band's album cover and it features pill capsules. I can create the object with ease, but when I click on "3D Revolve" and then hit "preview" it says "Rendering Artwork" and instantly freezes at halfway. how I want to get this done asap. I have tried the Alt+Ctrl+Shift trick that I have heard of, but that doesn't work either.
View 1 Replies
View Related
Aug 9, 2012
I am working in 5.5 and have a 3D revolved globe object with a map art applied. It is currently in A2 art board size and I need to increase to A0. When I scale the object I get "The combination of artwork size and resolution exceeds the maximum that can be rasterized." I have tried adjusting the rasterize setting and the map art.
View 5 Replies
View Related
Dec 19, 2013
I have a group of 3D objects using the revolve command (object on the left). Now I want to put the object on it's side. i.e. rotate it by 90 degrees exactly as it is but the 3D revolve is distorting it to look like the object on the right. How do I prevent this?
View 9 Replies
View Related
Oct 6, 2012
I have simple a 3D bottle shape created from about 16 points and I am trying to map a gif image on to it usning CS5. No matter what I have done (work from a new document, etc.) I always get the error message. I also receive this error when I attempt to map a jpg image on to the same shape. I have attempted this on three different Windows 7 machines running CS5 with the same result. When I try it with CS6 the program closes with a catastrophic error and no message. I do not receive this error using the default symbols. The gif and jpg images are imported and imbedded into the document and then moved to the symbols library.
View 6 Replies
View Related
Feb 11, 2013
I can get pre-loaded symbols to map to the art-work, but the symbol I created doesn't appear when I try to map it. I'm not sure if the problem is how I created the original artwork/symbol?
View 14 Replies
View Related
Oct 4, 2012
i am drawing a chamfered-counterbored cylinder... i meet the problem: unable to revolve the selected object ! After i convert the object i drawng to closed Polyline path with the Pedit command, it cant be revolve !
View 1 Replies
View Related
Dec 11, 2012
In Recolor artwork is there a way to change the black and white colors to a color? When I try to edit them it doesn't edit them at all. It would be nice if I didn't have to manually tweak the colors to have color before I go into Recolor Artwork.
View 2 Replies
View Related
Aug 29, 2012
If you open a 3d object is it possible to unwrap it to get the uv map? There is no uv map in the layers of an object I am working with. I am using cs5 extended.
View 3 Replies
View Related
Feb 9, 2014
I have got some problem with the UV map. I tried 2 method: use Flatten mapping on the whole object, and the other: separete the UV parts manual with Projection, and this work correct, but when i go far with the camera the UV shape will be visible. I want to use my model for a game and it will be more visible.
View 3 Replies
View Related
Dec 30, 2013
I am new to Illustrator and am trying to create a 3D dish that looks silver on one side and gold on the other. Is there a way I can do this? If I want to add further shapes to the top of this dish is it better to add these before applying the 3D effect? If so is it possible to apply the gradients to only part of the shape?
Alternatively would it be possible to use the gradient mesh in concave shape. The default mesh is convex. Is there an easy way to change this to concave?
View 14 Replies
View Related
Mar 20, 2014
Got a problem trying to wrap a vector illustration of a map around a sphere to create a globe for a logo (as per this tutorial: [URL] ....) except I don't want to make it look 3d with the shading options.
Basically when I do this, the map loses all it's detail almost as if Illustrator simplifies the map. I can't seem to work out at all how to make this while retaining the detail and export it as an eps.
View 14 Replies
View Related
Jun 29, 2013
I have a vector based illustration of 32 panels laid out, that make up the panels found on a football. I also have a 3d object of a 32 panel football. Is there a way of mapping the illustration onto the 3d object using Photoshop CC?
View 5 Replies
View Related
Jul 14, 2011
I've got a car that's been imported from Alias. Its been tessellated via showcase. I'm trying to UV map it as I need to apply some camouflage and it's not going so well. I get an extremely complex UV layout in the UV editor based on the original NURBS patch layout from Alias, needless to say its not very useable.
View 2 Replies
View Related
Aug 29, 2013
In the max scene you can see a spearfishing shaft, basically a very long in lenght cylinder.I properly map it as the checker texture that I apply shows, the problem is the lenght of the cylinder. As you can see in the photo, a screen shoot of max Unwrap UVW Modifier,(the uv islands are properly scaled with a correct proportion between them) if I scale them down to fit the UV space, in blue in the photo, blue arrow, because the lenght of the cylinder, I end up with very small islands. I did not scale them down jet to fit the UV space to show you my point.
I must scale them down to fit the UV space despite ending up with very small islands, losing a lot of definition, and most of the uv space hempty? how to correctly pack those UV island in the UV space? The problem is the lenght of the shaft that of curse I dont want cut down with seems.
View 4 Replies
View Related
Nov 16, 2011
I am trying to apply 3D Revolve effect using PlayActionEvent. Since effects are not recordable, I added it using "Insert Menu Item..." and saved .aia file, which contained 3 params (itnm, lcnm and cmid). These params were enough to invoke 3D Revolve Options Dialog using SDK, but nothing more. Two questions:
Is it possible to suppress Options dialog? I used kDialogOff, but without effect. I suppose that dialog showed because I haven't specified any additional parameter (like x, y, z rotation, angle, surface, etc), which leads to second questionHow to find out list of params that are necessary for particular effect?
Generally, is it possible at all to apply Effects using PlayActionEvent?
View 8 Replies
View Related
Jul 21, 2012
Here is cylinder made of rectangle using 3d Revolve effect.I want to change perspective of this cylinder like the red lines show, but it goes a bit to the left. I need exactly to the front. I think this is because perspective based on the center of rectangle (in the green circle) not on the center of cylinder. Is it possible to move the center of rectangle? If not, is any other decisions how to make what I want?
View 8 Replies
View Related
Jun 18, 2012
I found a solution to my objects being rendered incomplete by adjusting the perspective angle by a degree or two but this didn't solve my problem of the graphic map being incomplete.
Basically I'm making labels for different sized bottles (i.e. wine, beer and sake)the wine worked so far but for some reason this sake bottle's label wouldn't complete rendering.I dunno if it is because the side of the bottle is slightly angled or what but I cannot get it to complete the image map.
System: Mac Pro, OS X 7.4, Illustrator CS6
View 4 Replies
View Related
Sep 12, 2013
I've created 2 custom symbols to wrap around my sphere, but the more complex one will not map!
View 1 Replies
View Related
Mar 4, 2013
I'm trying to open a document that says "LTUnivers-BasicBlack is missing". I have a font called Univers LT Std on my system. How can I tell Illustrator to use Univers LT Std wherever it sees LTUnivers?
View 1 Replies
View Related
Jun 27, 2012
I'm learning from the official books for Adobe Illustrator CS5 and I found that the 3D view CS6 I always crash. CS5 works without problems. See the video here: [URL]
File is here:[URL]
Can you confirm that the error is not only me, but that's really wrong version CS6? Specifically, I use 64-bit version.
View 6 Replies
View Related
Feb 9, 2013
I have created an envelope mesh over a photograph of a face and I wish to map a pattern onto the mesh so it looks like a face. (none of the original photographed face needs be visible).
View 3 Replies
View Related
Jun 4, 2012
I'm away and on a colleagues Mac ( OSX 10.6.8 ) Running Photoshop CS5 and Illustrator CS6.Doing a little artworking for them. When I fired up Illustrator... the font mapping on the keyboard is screwy. Type an A, get a K etc...The settings on both the Mac and Illustrator are set up for British UK. Photoshop is fine, as is the Mac.Only Illustrator is acting up.
View 6 Replies
View Related
May 2, 2013
Here is the image I am working with URL....The words coca cola are in red in my design and whenever I add it to 3d mapping it red it no longer red but transparent. The stroke is grey on the bottle.
View 4 Replies
View Related
Nov 19, 2013
We've just received some artwork from a client in a PDF format, when this artwork is viewed in Adobe Acrobat it shows a star embedded in the artwork,but when the same PDF is opened in Illustrator CS6 this star doesn’t appear...... No warnings are shown to say artwork is missing or has been placed either?
But however when the artwork is exported from Adobe Acrobat in an EPS format, and then this EPS file opened in Illustrator CS6 the star appears.
View 3 Replies
View Related
Nov 26, 2013
I have a bunch of artwork that I need to fit to artboards that need to be the same size, basically I'm looking for something similar to "Fit to Frame" in Premiere/After Effects.
View 5 Replies
View Related
Aug 2, 2012
im exporting a pdf from illustrator,and half of my artwork is missing!what can i have done wrong?
View 2 Replies
View Related
Oct 29, 2013
I need to export some artwork from Illustrator CC to a PSD. It'll work on some artboards but on others I get an error "Photoshop file could not be saved.".I've restarted and updated.
View 8 Replies
View Related
Feb 28, 2013
I have a file with a number of artboards on which there are objetcs filled with 100% Magenta and some with 100% Magenta and 0,34% Yellow. I want to get rid of that 0,34% but Illy is refusing to cooperate.
Even selecting just two or three objects and trying to recolor using the Edit/Edit colors/Recolor Artwork dialog has no effect. I can change the color manually though, for one or more selected objects.
View 3 Replies
View Related
Apr 2, 2013
I imported a piece of art into Illustrator and I want all parts of it to be equal and symmetrical. What would be the best way to start going about this?
View 5 Replies
View Related
