print of Gray0 resulting in halftone through HP Laserjet P2035. Two days back it was perfectly printing as solid black. Through MS Paint and MS Word, it is printing black as solid black but not from CorelDraw x6.1. What and where settings got changed, is unknown? Screen shots attached.
Using F8, workspace resetting is tried but results are same i.e. Gray0 as halftone.
I'm unable to print halftone on postscript printer.
View 1 Replies View RelatedEver since updating our print server to use the HP Universal driver, my ability to tweak the non-printable margins has gone away. In the past I was always able to easily tweak margins within my PC3 files using the "Modify Standard Paper Sizes (Printable Area)" tool. Setting all four values to say "0.25" would result in an even 1/4" margin around all four edges of the paper.
Now however, that behavior is just plain different. Using 0.25 all the way around results in plots that are partially shifted off the page. Using different values for top, bottom, left and right results in one or two margins coming out much wider than I want. The frustrating part is there seems to be no rhyme or reason between these values and the plot output. The default values are 0.17 for Top/Bottom and 0.25 for Left/Right but even this results in uneven margins. Only if I make the slightest of tweaks can I get any tiny bit of improvement, which is still not up to previous standards. Anything larger and the output is much worse. I've tried all 0.0, setting top/bot only. left/right only, but none of my combinations of values works.
On top of that there seems to be inconsistency between each printer, even when the printer Model is the same. For example the output on my 9050DN printers range from just "Decent but not like before" to plain "awful". My older 8150 DN models look the best but still do not match previous output.
Is there an alternative way to adjust paper margins? Is there a new method to adjusting the "Modify Standard Paper Sizes (Printable Area)" ?
What do I have to do to print borderless photos on a LaserJet Pro 200 M251 nw printer?
View 2 Replies View RelatedWhen I trying to plott (or do a preview) with HP LaserJet 1525 nw configurated, autocad crashes. I have the latest drivers and updates installed Autocad 2011 64bits (sp2) on windows 7 64 sp1
View 1 Replies View RelatedI'm looking for a way to print at around 200 lpi with a laser printer, but I don't know which one. I've bought a Laserjet Pro 200 n251mw but it doesn't seem to be able to print in halftone even with the PS emulation.
I'd like to be able to reproduce the distinctive rosette pattern on one of my collectible playing card. I've looked everywhere on google, but most of the doc about halftone is referring to low lpi work like T-Shirts.
The fact is that I can produce the desired halftone pattern I want in Illustrator, I just can't seem to find a way to print it. I've read about Xerox printers on this forum that are maybe able to do it, but I don't know. Is a 600 dpi laser printer enough or do I need more ?
Here's a sample of the halftone I want to reproduce, the canvas is approximately ¾ of an inch.
I am running the demo version of CorelCad for Mac.What is with the printing. I am trying to print lineweights by color using a colortable (.ctb) with my company standards. Everything is fuzzy! Resolution is not good.Block attributes all print with a halftone background that should not be present.Is this a result of using in the demo version?
Do I need to eliminate the colortables? These are a carryover from Autocad.
I have a problem that's been driving me nuts for the past couple of weeks. I have a collectible playing card that I' like to reprint . The card was printed using an offset press and so there is a distinct halftone pattern on the card. What I'd like to do is to scan the card, remove the pattern in photoshop (Noise->Median), use CorelDraw to print a ps which would reproduce the exact same pattern, and print it using Ghost Script with my Laser Jet 200 (600 dpi).
Here's a link to the card:[URL]......
So I have 3 questions.
Is it possible to reproduce the halftone pattern ?
If yes, can I do it with my printer ?
If no, what printer could do it ?
How to do center Halftone Effect in CorelDraw in Photoshop Corel not getteing proper result.
View 5 Replies View RelatedHow to create a halftone wrap on a sphere like this:
View 7 Replies View RelatedI finally found a halftone printing solution to my HP 5100 tn, My problem is that if I set an lpi (any), I cannot get 100 percent black no matter what color pallete I use. Everything that should be solid prints at about 90% halftone.
using Windows 7 64 bit, corel X3 with Ghostscript 9.05
How can I create a halftone for screen printing on textiles. I need to have vectored dots.
View 5 Replies View RelatedWhen printing a image in halftone from Corel x5. The image looks great in print preview but if I try printing it prints a solid black page.
View 7 Replies View RelatedI require an equally spaced fine line shading in an extrusion. I will take you through my process and then get to the problem.
I create an object (usually curved text), extrude it and break the extrusion apart; then I use the fill tool and open fill color dialog, change to palettes and select black, 20%; next I click on options and select Postscript options, from there I select line and an angle and frequency. This produces exactly the fine line shading I need, when I print it on my postscript printer.
The problem is that when I save the file as an .eps or .ai file to send to another prepress, the screen in their file always show up as dots not lines. I have not been able to find a way around this, the other fill types use tiling and that does not produce the same consistent shading.
When I want to print something out from Photoshop CS5 on my printer I get this error.
PCL XL Error
Subsystem: KERNEL
Error: IllegalOperatorSequence
File name: derived_scr/1x55.ndbg.kernel.c
Line number: 1820
My windows system is Windows xp professional with service pack 3. If I print out from other program I don´t get any errors.
This is a new printer and before I got this I had a HP Color Laserjet CP5225 and there were no problems printing out from Adobe Photoshop CS5.
I have an HP workstation Z220 with OS Windows 7 64 bit. I have installed my printer HP Laserjet Pro CM1415nf using the original CD Drivers and have also installed AutoCAD Architecture 2011 and 2013.
When trying to print from both AutoCAD versions to the printer, the application crashes and I need to close the program. When I try to print to a different printer everything is ok. I have checked for updated drivers of the printer and downloaded from HP site by the problem is still there.
I have AutoCAD 2014, When I Try to Plot on HP LaserJet Pro CP1525nw Color Printer. The software crashes. It even doe not show the preview. I am using Windows 7. AUTOCAD functions properly with other printers and I can plot the and HP LaserJet Pro CP1525nw Color Printer too woks well with other softwares.
View 1 Replies View RelatedRunning under Mac OS 10.6.8, we've run into a problem printing separations to our new hp LaserJet Enterprise 600 m601 printer from Illustrator CS4, CS5 and CS6.
In the printer dialog box, once under the "Output" section, with the mode set to either "Separations" or "In-RIP Separations", there are no options listed in the "Printer Resolution" drop-down.
I've tried re-installing the driver, changing the resolution settings in the printer itself, using a generic PS driver, and contacting hp directly (their solution was to contact Adobe). I have yet to contact Adobe itself, but none of my other attempts netted a different result.
In the document ink listing, the Frequency and Angle listings are still editable, but needs to be done manually for every colour, and the dot shape options are non-existant.
We had previously been using a hp LaserJet 2300n, but we were running into insufficient memory issues on an increasingly frequently basis. The driver for the 2300n had several different sets of Printer Resolution settings, so once the new printer was set up, I *assumed* that it would have the same kind of options.
I have discovered that if I change my PPD from the proper driver (HP LaserJet 600 M601 M602 M603) to the old one (Hp LaserJet 2300) I am then able to select the resolution I want from the drop-down list, switch the PPD back to the proper one for the M601, and it seems to work (leaving the 2300 as the PPD file results in a warning and a failed print attempt).
I also tried printing something from a non-Adobe program using the M601, and there were two options available for printer quality (resolution?) settings.
This file will crash when I try to print or print preview.
[URL]
No problem printing other files.Btw, from Document Properties, it shows that there are two RGB fills, which I cannot find.
That's the reason why I go into Print Preview to look at the separations.
I have CorelDraw X4... I created a design like I always do, but I can't print. All the "Print" options are grayed out and won't let me use them.
View 4 Replies View Relatedhow to do turn my image into the "dots" like that one of that face, I kind of (not really) know how to use the color halftone filter but i can't do this.
View 1 Replies View RelatedI am a screen printer and us photoshop regularly and that feature is a ver important part of my serparations when I make my film. I am also sue that thousands of screen printer also use this feature. Why can not such a simple already installed feature not be kept? Maybe off set printer do not need this but screen printers need this feature, we must be able to adjust our DPI , dot style and angle.
View 12 Replies View RelatedI have read several topics and threads regarding halftone, I can create an image using this effect but I would like to know how to make one that is in colour with black dots.
Please see the image attached as an example.
I have created one but the dots are in colour, again see attached.
The only way I can think I creating the image in colour and with black dots is using two separate images and then merging them.
The image to the left, the mans face ;
Ive been trying for days to create this type of halftone effect to photos in photoshop,
how to create those Colour halftone effect?
I had seen alot of advertising poster using those effects but i simply cant get to the way they did.
I tried the colour halftone in my PS 7 but its not what i want.
For example, I have an image of a face, Is there any way I can have this face to b seen as dots?
The Dots usually are spaced at different distances and in different sizes.
here are my instructions for a photo... i acted like i knew what my boss was talking about bc i didnt want to look like an idiot. but honestly i forgot what this stuff means.
-convert to halftone
-screen halftone to 20%
-120 lines
I have to prepare it for film too, in case that changes anything.
i recently upgraded my iMac from 9.1 to 9.2, and all seemed to work well. however, there is a problem with Photoshop. i routinely use halftones in my work, and am having a big problem selecting a halftone pattern. no matter which pattern i select (elipse, round, line, etc.) all i get are squares.
i've tried deleting my preferences and also upgraded from 6.0 to 6.0.1, but the problem remains.
Adobe Illustrator question: How do you make halftone 3D? As in not just different sizes of circles, but contour the ellipses to the grid of the shape. The Warp tool sort of does this but I need a more precise method. Also the result needs to be in vector.
View 2 Replies View RelatedI'm using Photoshop CS5 on Mac OS X. Last year I created an artwork including colour half tones, but also some other simple halftone filter that I applied to layers of solid colour (see attached image - you may need to view it at 100% to see what I mean)
It's a simple half tone pattern of white vs 1xcolour using either circles or squares. I remember that this was applied simply, not any special process as I didn't go out of my way to create this effect I just stumbled upon it. I can't for the life of me remember how to do it again.
I have been struggling to master the style used here by artist Joshua Budich, I have been searching the internet and spending many hours on photoshop the past few days trying to figure out how to add halftone/polka dots in the same colours, like the one used in the Star Wars print and the pattern used on Tyrell.
View 7 Replies View RelatedHow can I create a custom halftone screen? I have tried to define a pattern and use that, and have over layed a pattern with hard-mix but I cannot seem to get as clear results as these.
View 9 Replies View Related