I have AutoCAD 2014, When I Try to Plot on HP LaserJet Pro CP1525nw Color Printer. The software crashes. It even doe not show the preview. I am using Windows 7. AUTOCAD functions properly with other printers and I can plot the and HP LaserJet Pro CP1525nw Color Printer too woks well with other softwares.
View 1 Replies
Running under Mac OS 10.6.8, we've run into a problem printing separations to our new hp LaserJet Enterprise 600 m601 printer from Illustrator CS4, CS5 and CS6.
In the printer dialog box, once under the "Output" section, with the mode set to either "Separations" or "In-RIP Separations", there are no options listed in the "Printer Resolution" drop-down.
I've tried re-installing the driver, changing the resolution settings in the printer itself, using a generic PS driver, and contacting hp directly (their solution was to contact Adobe). I have yet to contact Adobe itself, but none of my other attempts netted a different result.
In the document ink listing, the Frequency and Angle listings are still editable, but needs to be done manually for every colour, and the dot shape options are non-existant.
We had previously been using a hp LaserJet 2300n, but we were running into insufficient memory issues on an increasingly frequently basis. The driver for the 2300n had several different sets of Printer Resolution settings, so once the new printer was set up, I *assumed* that it would have the same kind of options.
I have discovered that if I change my PPD from the proper driver (HP LaserJet 600 M601 M602 M603) to the old one (Hp LaserJet 2300) I am then able to select the resolution I want from the drop-down list, switch the PPD back to the proper one for the M601, and it seems to work (leaving the 2300 as the PPD file results in a warning and a failed print attempt).
I also tried printing something from a non-Adobe program using the M601, and there were two options available for printer quality (resolution?) settings.
I have an HP workstation Z220 with OS Windows 7 64 bit. I have installed my printer HP Laserjet Pro CM1415nf using the original CD Drivers and have also installed AutoCAD Architecture 2011 and 2013.
When trying to print from both AutoCAD versions to the printer, the application crashes and I need to close the program. When I try to print to a different printer everything is ok. I have checked for updated drivers of the printer and downloaded from HP site by the problem is still there.
AutoCad I have both a CTB and STB black and white plot style converted from a previous version of AutoCAD. I have it set as my default plot stlye and set up in the page manager. No matter what I do it continues to preview and plot ONLY in color.
View 9 Replies View RelatedI'm attempting to plot a drawing with a 3d shape and a title block around it. I would like for the occluded lines to not be drawn therefore I'm using the hidden visual style and set shade plot to hidden as well.
My problem arises from the quality of the plot to PDF versus the quality coming out of a printer. It is just a 8.5x11 page. The pdf comes out with horrible anti-aliasing and jagged lines, whereas the print is entirely smooth. Is there something simple I'm missing? It would be even better to find a way to make the plot to PDF come out in vector format! I know it is possible to show the layers and have them vectorized in a PDF... How is this done?
What do I have to do to print borderless photos on a LaserJet Pro 200 M251 nw printer?
View 2 Replies View RelatedI'm having problems with lineweights. It shows up too dark whenever I plot to both pdf and the printer (Kyocera KM-2560 KX). Ive tried adjusting the ctb file (changing thicknesses of colours) but to no avail. This problem does not occur for my colleagues, with exactly the same ctb file. So is it a general autocad setting problem?
View 2 Replies View RelatedWhen I plot directly to a plotter or to a PDF file from paper space, some of the 3d pipe model will fade out along the pipe line. It happens to some of the lines, not all. I have re-drawn the pipes and drawn them using different UCS orientations. No change. I changed the layer color, changed the tessellation, line weight. Can this problem be related to the display driver, either software or video card? I have the latest drivers. ACAD ver. 11, nvidia quatro fx-3800 card.
View 1 Replies View RelatedI have an office with 3 network printers and 18 computers with Windows XP and AutoCAD + Revit 2010 installed. I never had issues related to printers I couldn't solve myself, but this time one of the machines decided not to allow me to use a specific printer (HP Designjet 70). When I select it, it quickly change the selected printer to "None". Its the only computer in the office with the issue, and I can't find out why. I already reinstalled the printer in many ways, even using other sharing paths, its useless. I imported AutoCAD settings from other machines, no use. Cleaned print spooler folder, reseted many settings to default, set it to off-line then on-line again, deleted useless PC3 files and everything that occurred to me, but still nothing changed it. The AutoCAD doesnt emmit errors, nothing, just refuse to accept the printer.
View 6 Replies View RelatedWe have a new printer/plotter in our office and Autocad cannot find the old one and so I have to select the new one. Here's the scoop:
When I am in the layout tab, everything is perfectly aligned in my layout sheet (24 x 36) and so I type plot and before the dialogue screen appears (We just got a new plotter) Autocad says: "such and such printer: This plotter config. cannot be used for blah blah blah.... The None plot device has been substituted." Which makes sense because that such and such printer is non existent. So i click ok. and the usual plot dialogue screen displays.
I select our new plotter and the exact size of my layout sheet (24 x 36) and click apply to layout and then preview it and it shows the layout cutting off my titleblock on the right hand side. So I cancel the plot (having applied the new printer and 24 x 36 config.) and look at my layout and either my layout sheet or my linework has shifted about 3/4" up and 3/4" to the side.
Why did something shift? My layout sheet was already aligned and at 24 x 36. I don't want to have to move it every time especially if I need to print off older drawings which are set up with the non existent printer. Should I or could I make autocad ignore the old printer and tell it to recognize the new one so I wont ask me every time i open an older drawing?
I am a student studying architecture and I cannot seem to plot the line weights in my drawing. I'm using a dwg to pdf ploter. The plot styles I have tired, have included monochrom ctb and monochrome 1 to 50 ctb.
View 7 Replies View RelatedI cannot remember if you can plot (.plt) files that were sent to me????
View 1 Replies View RelatedRelatively new to the software, I am completely and utterly confused as to how to set up colours and lineweights for plotting. At the moment I have a titlebox template which prints as desired (black borders and colour logo), but when it comes to plotting views that are in the sheet file, they always print in black and white. I think I need to start from scratch here....
- Do I set colours in the view drawing or in the sheet file? What about overrides?
- How do i set up my plot styles?
- What ctb or stb should I use for printing geometry in black and white with only several lines in colour as required.
I have noticed for many years (since ADT 2006...) that the OTB line weights seem to plot the same. For example, I don't notice much difference (actually none at all) on paper between A-Sect-Thin, A-Sect-Med, A-Sect-Fine, A-Dtl-Fine, etc... I have always remedied this by adjusting the Global Line weights, which I know is not optimal and I tell everybody else in my firm not to do it.
That being said, some of the more "seasoned" architects who are trying to use ACA are having trouble getting the line weights to print as they would have hand drawn them years ago. It has inspired me to take another stab at understanding this issue and trying to determine how it is intended to be used, and what I am doing wrong.
I have gotten the office to use the OTB - AIA LWT By Object.ctb, which I would assume coincides with the OTB AEC styles / objects. Can some one explain this to me or tell me where I am going wrong? I have the "Plot Object Lineweights" checked in the plot dialogue box, and honestly have checked and unchecked the "scale lineweights" box and notice no difference.
I have a drawing with the floor plan as an xref. I added the plumbing on top of the xref. My problem comes when plotting. When I print the drawing to the plotter, since the plotter is black and white only the lines of the plumbing come out darker than the xref. But I also need a pdf copy in black and white, but when I change the settings to greyscale all the lines look the same in terms of darkness.
Additional info, the xref is grey and the plumbing layer line color is dark purple.
I am trying to set up a Plot Style for the office and have gone through the standard procedures to do this, but can not get it to print in black/white. I am trying to set up a universal plot style that everyone uses.
I have attached my screen showing my plot style manager settings.
I'm working on getting my autocad groove back, and I'm not sure how to get my plotted output to look right. Specifically, how to plot b/w instead of colors, and how to control lineweights. BTW, I seem to have ctb files, but they don't show up in the styles when I go to plot.
View 1 Replies View RelatedI plot my drawings from a layout to PDF then can print from various printers, but the PDF and subsequent plots come out very light, somewhat like in a halftone plot. The image in the paper view port also show lighter than the color in the model view. I am using the AIA standard color.ctb plot style and have tried switching to various styles.
View 9 Replies View RelatedAfter I plot to pdf, I get an error message: You do not have a PDF viewing application installed. Go to the internet and dowload a pdf viewer. The problem is that Acrobat Reader X is installed on my computer. I saw the thread about Reader X having spooling issues, so I reinstalled Acrobat Reader 9. Still get the same message.I can go to the file afterwards and open it, despite this message, but it is supposed to open from Architecture after it is plotted and it won't do that.
View 4 Replies View RelatedSuddenly, each time that I attempt to plot or print a drawing I get the message "Errors or Warnings Found". I open it up and it shows that the plot has been cancelled. I have run all of the "traps" that I know but to no avail.
View 5 Replies View RelatedI'm trying to plot a simple site plan to PDF through the DWG to PDF.pc3 option.
The scale in my model space is 1-1 and in my viewport in paper space 1-200.
The issue is I plot to PDF, and then the scale is way out. For example an object that should be 10,000mm long in model space appears as 59mm (11,800mm scaled) on the PDF. And of course when I print from the PDF to a printer this scale error carries over.
I have a client who updated to AutoCAD Arch 2014 and now is having trouble with his grey lines printing pixilated.
He is using the same .ctb file from 2013 (moved up from 2012) also his pc3 file (from 2012). When he moved to 2013 he had this issue and went back to his 2012 pc3 and everything was working fine again.
So when he had the issue in 2014 he started using the 2012 pc3 file. But this time - no change.
Weve recently updated our systems at our office to OS Windows 7 Pro 64 bit. Im currently using AutoCad Architecture 2010. We also upgraded to Adobe Acrobat X.
The iissue i have is when plotting to PDF (selecting Adobe PDF as printer) it takes a long time to spool. Sometimes it takes as much as 4 mins before it completes the PDF. Other times it just crashes.
This is the first im using Acrobat X. Previoulsly i was using Acrobat 8 without issues. My thought is there might be a compatibility issue with the new version of Adobe X. Or perhaps its a simple as the settings im using. The other user in my office is running the same system, but hes using Acrobat 9, and of course his works flawlessly?
The temporary work-around is Exporting to PDF within AutoCAD.
problem when plotting files that have PDF images attached to them and are viewed through a viewport. When plotting, the publishing bar fills up but then stays filled and doesnt disappear. At this point AutoCAD is locked up and I see the file starts spooling. I have several PDF files attached that amount to no more than 500 kb, however, when spooling it racks up to 30mb before in sends it off to the plotter and it takes a very lenghtly wait (up to 60 min). Eventually it plots and sometimes it doesn't plot at all. After a while if I try cancelling the plot, it will start plotting but only half of the page and after that the entire operating system will lockup. We have several machines (6) and 2 plotters in a network and the plotters are shared. Is there a better and faster way to work with PDF xrefs? Could this be a networking problem instead of AutoCAD?
machine specs:
Dell Precision T3400
Intell Core Duo @ 2.33GHz
2GB RAM
OS: XP pro ver.2002 (w/ SP3)
AutoCAD Architecture 2012
Plotters:
HP Design Jet 1055CM
KIP 3000
I recently downloaded student version of architecture 2011 and works great, but how do I get rid of the message that plots with my drawings, produced by autodesk education product.
View 2 Replies View RelatedI am using 2012 Architecture and when plotting layouts it is converting curved surfaces into liniar hatched messes, my office just converted to 2012 from 2006.
i am using legacy hidden with monochrome.
I have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
I'm putting together an elevation where I want to be able to pdf the drawing in color but I'm having trouble getting the colors to plot. For instance I'm using color 37 and in the plot style table editor the color is set to 37, pen # is "automatic" and virtual pen # is "37". When I plot to a pdf that color doesn't even show on the plot. What am I missing here?
View 2 Replies View RelatedEver since updating our print server to use the HP Universal driver, my ability to tweak the non-printable margins has gone away. In the past I was always able to easily tweak margins within my PC3 files using the "Modify Standard Paper Sizes (Printable Area)" tool. Setting all four values to say "0.25" would result in an even 1/4" margin around all four edges of the paper.
Now however, that behavior is just plain different. Using 0.25 all the way around results in plots that are partially shifted off the page. Using different values for top, bottom, left and right results in one or two margins coming out much wider than I want. The frustrating part is there seems to be no rhyme or reason between these values and the plot output. The default values are 0.17 for Top/Bottom and 0.25 for Left/Right but even this results in uneven margins. Only if I make the slightest of tweaks can I get any tiny bit of improvement, which is still not up to previous standards. Anything larger and the output is much worse. I've tried all 0.0, setting top/bot only. left/right only, but none of my combinations of values works.
On top of that there seems to be inconsistency between each printer, even when the printer Model is the same. For example the output on my 9050DN printers range from just "Decent but not like before" to plain "awful". My older 8150 DN models look the best but still do not match previous output.
Is there an alternative way to adjust paper margins? Is there a new method to adjusting the "Modify Standard Paper Sizes (Printable Area)" ?
Here is my problem;
•Need to plot entire drawing in Greyscale, with that in mind I need to select X number of objects in the drawing to plot in Color. So in the end I will have a complete drawing in greyscale and a selection of objects in color so they stand out.
•Now, I know I can do this through the .ctb file but I have many colors / layers and many objects so this will take a long time to do.
•Is there an app or override option I can use to do this?
I would like to know if it is possible to plot one layer in color, while all the others plot in black.
I know it is possible to plot a drawing in which all or most of the colors plot in black while plotting one particular color in its actual color. This is done by adjusting your pen settings in that they are all set to black except for a designated color to actually plot at that color.
We have a client that would like a layer or two in color and everything else in black. If you could plot those particular colors in actual color my problem would be solved. However, the color of those layers in question are shared by other layers that need to be in black. I can change the color of those layers to a unique color and set the pen settings to print that color in color, but I wanted to know if you could simply plot a designated layer (or more) in color.
