AutoCad I have both a CTB and STB black and white plot style converted from a previous version of AutoCAD. I have it set as my default plot stlye and set up in the page manager. No matter what I do it continues to preview and plot ONLY in color.
View 9 RepliesI have AutoCAD 2014, When I Try to Plot on HP LaserJet Pro CP1525nw Color Printer. The software crashes. It even doe not show the preview. I am using Windows 7. AUTOCAD functions properly with other printers and I can plot the and HP LaserJet Pro CP1525nw Color Printer too woks well with other softwares.
View 1 Replies View RelatedI just loaded AutoCAD 2012 on Friday and have noticed that when I use annotative text or mtext in paper space when printing or previewing the text it rotates 90 degrees to vertical, but is horizontal in the drawing. Only does this with annotative text or mtext, non annotative text and mtext remains horizontal when previewing or printing.
View 3 Replies View RelatedI have a drawing that I created with acad 2010 that has a pdf xref attached. I just updated to 2013. And now when I go to plot the drawing my xref shows up in preview but doesn't show up on the plot.
I can go back to my 2010 version, and it plots fine. What gives?
I am a student studying architecture and I cannot seem to plot the line weights in my drawing. I'm using a dwg to pdf ploter. The plot styles I have tired, have included monochrom ctb and monochrome 1 to 50 ctb.
View 7 Replies View RelatedI cannot remember if you can plot (.plt) files that were sent to me????
View 1 Replies View RelatedRelatively new to the software, I am completely and utterly confused as to how to set up colours and lineweights for plotting. At the moment I have a titlebox template which prints as desired (black borders and colour logo), but when it comes to plotting views that are in the sheet file, they always print in black and white. I think I need to start from scratch here....
- Do I set colours in the view drawing or in the sheet file? What about overrides?
- How do i set up my plot styles?
- What ctb or stb should I use for printing geometry in black and white with only several lines in colour as required.
I have noticed for many years (since ADT 2006...) that the OTB line weights seem to plot the same. For example, I don't notice much difference (actually none at all) on paper between A-Sect-Thin, A-Sect-Med, A-Sect-Fine, A-Dtl-Fine, etc... I have always remedied this by adjusting the Global Line weights, which I know is not optimal and I tell everybody else in my firm not to do it.
That being said, some of the more "seasoned" architects who are trying to use ACA are having trouble getting the line weights to print as they would have hand drawn them years ago. It has inspired me to take another stab at understanding this issue and trying to determine how it is intended to be used, and what I am doing wrong.
I have gotten the office to use the OTB - AIA LWT By Object.ctb, which I would assume coincides with the OTB AEC styles / objects. Can some one explain this to me or tell me where I am going wrong? I have the "Plot Object Lineweights" checked in the plot dialogue box, and honestly have checked and unchecked the "scale lineweights" box and notice no difference.
I have a drawing with the floor plan as an xref. I added the plumbing on top of the xref. My problem comes when plotting. When I print the drawing to the plotter, since the plotter is black and white only the lines of the plumbing come out darker than the xref. But I also need a pdf copy in black and white, but when I change the settings to greyscale all the lines look the same in terms of darkness.
Additional info, the xref is grey and the plumbing layer line color is dark purple.
I am trying to set up a Plot Style for the office and have gone through the standard procedures to do this, but can not get it to print in black/white. I am trying to set up a universal plot style that everyone uses.
I have attached my screen showing my plot style manager settings.
I'm working on getting my autocad groove back, and I'm not sure how to get my plotted output to look right. Specifically, how to plot b/w instead of colors, and how to control lineweights. BTW, I seem to have ctb files, but they don't show up in the styles when I go to plot.
View 1 Replies View RelatedI plot my drawings from a layout to PDF then can print from various printers, but the PDF and subsequent plots come out very light, somewhat like in a halftone plot. The image in the paper view port also show lighter than the color in the model view. I am using the AIA standard color.ctb plot style and have tried switching to various styles.
View 9 Replies View RelatedAfter I plot to pdf, I get an error message: You do not have a PDF viewing application installed. Go to the internet and dowload a pdf viewer. The problem is that Acrobat Reader X is installed on my computer. I saw the thread about Reader X having spooling issues, so I reinstalled Acrobat Reader 9. Still get the same message.I can go to the file afterwards and open it, despite this message, but it is supposed to open from Architecture after it is plotted and it won't do that.
View 4 Replies View RelatedSuddenly, each time that I attempt to plot or print a drawing I get the message "Errors or Warnings Found". I open it up and it shows that the plot has been cancelled. I have run all of the "traps" that I know but to no avail.
View 5 Replies View RelatedI'm trying to plot a simple site plan to PDF through the DWG to PDF.pc3 option.
The scale in my model space is 1-1 and in my viewport in paper space 1-200.
The issue is I plot to PDF, and then the scale is way out. For example an object that should be 10,000mm long in model space appears as 59mm (11,800mm scaled) on the PDF. And of course when I print from the PDF to a printer this scale error carries over.
I have a client who updated to AutoCAD Arch 2014 and now is having trouble with his grey lines printing pixilated.
He is using the same .ctb file from 2013 (moved up from 2012) also his pc3 file (from 2012). When he moved to 2013 he had this issue and went back to his 2012 pc3 and everything was working fine again.
So when he had the issue in 2014 he started using the 2012 pc3 file. But this time - no change.
Weve recently updated our systems at our office to OS Windows 7 Pro 64 bit. Im currently using AutoCad Architecture 2010. We also upgraded to Adobe Acrobat X.
The iissue i have is when plotting to PDF (selecting Adobe PDF as printer) it takes a long time to spool. Sometimes it takes as much as 4 mins before it completes the PDF. Other times it just crashes.
This is the first im using Acrobat X. Previoulsly i was using Acrobat 8 without issues. My thought is there might be a compatibility issue with the new version of Adobe X. Or perhaps its a simple as the settings im using. The other user in my office is running the same system, but hes using Acrobat 9, and of course his works flawlessly?
The temporary work-around is Exporting to PDF within AutoCAD.
problem when plotting files that have PDF images attached to them and are viewed through a viewport. When plotting, the publishing bar fills up but then stays filled and doesnt disappear. At this point AutoCAD is locked up and I see the file starts spooling. I have several PDF files attached that amount to no more than 500 kb, however, when spooling it racks up to 30mb before in sends it off to the plotter and it takes a very lenghtly wait (up to 60 min). Eventually it plots and sometimes it doesn't plot at all. After a while if I try cancelling the plot, it will start plotting but only half of the page and after that the entire operating system will lockup. We have several machines (6) and 2 plotters in a network and the plotters are shared. Is there a better and faster way to work with PDF xrefs? Could this be a networking problem instead of AutoCAD?
machine specs:
Dell Precision T3400
Intell Core Duo @ 2.33GHz
2GB RAM
OS: XP pro ver.2002 (w/ SP3)
AutoCAD Architecture 2012
Plotters:
HP Design Jet 1055CM
KIP 3000
I recently downloaded student version of architecture 2011 and works great, but how do I get rid of the message that plots with my drawings, produced by autodesk education product.
View 2 Replies View RelatedI am using 2012 Architecture and when plotting layouts it is converting curved surfaces into liniar hatched messes, my office just converted to 2012 from 2006.
i am using legacy hidden with monochrome.
I have a set of drawings.
Titleblocks are drawing files with the floors xref'd in.
It's a pretty regular aggregate xref method.
I have a sheet with a roof plan.
The third floor (unique xref - attach) has vpcolours assigned to layers so that the walls show greyed out, for routing roof drains.
If I plot this sheet on it's own, the walls below show.
If I plot the whole set by shift clicking the drawings in the sheet set, and choosing publish to PDF, this drawing doesn't show. I get the roof plan without the xref'd walls below showing.
I'd like to issue one pdf file of the whole set, but this one sheet in the middle isn't showing. I don't have an adobe suite to plot the roof plan on it's own and cut it in for the wrong one because $1500.00
I'd like to be able to plot the draiwng correctly from AutoCAD.
When I hover the cursor / pickbox over a line, in about 1 second a small box (approx. 1" x 1" on the screen) pops open immediately next to the cursor - which lists the Color, Layer and Linetype of the line. As you move the cursor around the screen, these little boxes are constantly popping open - which is very distracting. How do you turn off this feature?
View 2 Replies View RelatedACA 2013: We have notice that autodesk has added a quick preview for fillet and offset. It shows what the fillet is going to look like or what the offset is going to be. Is there a way to turn this off?
View 3 Replies View RelatedI'm running Autocad Architecture 2013. My .dwg has about 15 pdf's in it (from a consultant that does hand drawings that I scan in, and use the image manager to insert into my drawing). The PDF's range from under 1mb, to 10mb. The PDFs are in model space and within my various drawing sheets, I show them in my drawing sheets via multiple viewports. I noticed that when I go to plot a sheet that has pdfs shown in viewports, and click on PLOT PREVIEW, the PDF's don't show up - everything else shows up, linework, jpegs, etc, but not the PDF's! I fiddled with the viewports and noticed that if some part of the PDF's image frame was visible in the Viewport, the PDF would appear in Print Preview. But if the viewport sat directly over the PDF's image frame, the PDF would not show up in the Plot Preview!!!
Could it be I've exceeded the maximum number of Viewports in my entire .dwg? (I have about 16 sheets), Or, could it be some mysterious autocad system variable that I'm running up against.
I'm putting together an elevation where I want to be able to pdf the drawing in color but I'm having trouble getting the colors to plot. For instance I'm using color 37 and in the plot style table editor the color is set to 37, pen # is "automatic" and virtual pen # is "37". When I plot to a pdf that color doesn't even show on the plot. What am I missing here?
View 2 Replies View RelatedWe are using AutoCAD Architecture 2013 on machines running Windows 7. When multiple AutoCAD drawings are open on most machines in the office the icon in the Windows Toolbar shows multiple stacked AutoCAD images, and when you hover over those icons, all of the open drawings appear in thumbnail across the bottom. (This is a very nice feature!)
Unfortunately one machine in the office is not doing that with AutoCAD. That machine will show multiple icons and thumbnail previews for PDFs, Word files, etc., but not AutoCAD. Is there a setting that can be changed to make the thumbnail drawings for ALL open drawings appear when hovering over the icon in the Windows Toolbar? (That computer will show a thumbnail preview of the active drawing, but not all open drawings.)
Here is my problem;
•Need to plot entire drawing in Greyscale, with that in mind I need to select X number of objects in the drawing to plot in Color. So in the end I will have a complete drawing in greyscale and a selection of objects in color so they stand out.
•Now, I know I can do this through the .ctb file but I have many colors / layers and many objects so this will take a long time to do.
•Is there an app or override option I can use to do this?
I would like to know if it is possible to plot one layer in color, while all the others plot in black.
I know it is possible to plot a drawing in which all or most of the colors plot in black while plotting one particular color in its actual color. This is done by adjusting your pen settings in that they are all set to black except for a designated color to actually plot at that color.
We have a client that would like a layer or two in color and everything else in black. If you could plot those particular colors in actual color my problem would be solved. However, the color of those layers in question are shared by other layers that need to be in black. I can change the color of those layers to a unique color and set the pen settings to print that color in color, but I wanted to know if you could simply plot a designated layer (or more) in color.
I am trying to plot a multi-colored layout in monochrome. I have gone through the page setup manager and set my style to monochrome. My prints come out in color. I have made my own propety and listed the print to be made in black only. Is there another setting that I need to setup differently to print in Black & White?
View 9 Replies View Relatedis it possible to plot a viewport containing many layers and colors just in one specific color without changing the colors of all the layers?
View 3 Replies View RelatedI am trying to simply print my model as it appears on the screen, but when I go to plot it shows my preview either in wireframe or as a shadow. I have tried all of the different view types (realistic, conceptual, etc.) but none of them print it as shown on the screen. Is there something I can do to plot it as is?
View 1 Replies View Related