CorelDRAW X6 :: Export To Huge TIFF Crashed
Mar 5, 2013I tried export cdr to huge tiff image, 300dpi and 25m x 3m size. The problem is my X6 crashed, i am using Win XP SP3 4gb ddr dell optiplex 380 series.
View 4 Replies
ADVERTISEMENT
CorelDRAW X5 :: Producing Huge PDF Export Files
Jul 21, 2011I had a road map drawing in Draw X3, mostly lines and text, and used to export to pdf for smartfphone compatibility, getting typically an adequate quality 204 kB file using "export for editing" export setting. After upgrading to Draw X5 the same file gives a 1508 kB pdf file which is too large. If the export setting is turned back to "web" I get a small 40 kB file but the quality is not so good. How do I compromise between "web" and "edit" settings for exporting to pdf.
View 9 Replies View RelatedCorelDRAW X6 :: Export To TIFF?
Nov 12, 2012We just upgraded from Corel X4 to X6. When exporting a file into tiff in X6 , some images are creating extra lines that run into space. The images are made form cgm files, have not the best quality and relative old but in X4 I never had a problem with that.2678.test_c_drw_000_X4.tif4722.test_c_drw_000_x6.tif
Any new setting that needs to be on or off ?
I noticed that in X4 there is an option to apply ICC profile which I can't find in X6.Does this influence this?
CorelDRAW X6 :: How To Export To TIFF
Apr 9, 2012Some days ago, I installed the x6 version. Now I find that, when export to Tif using x6 with the same settings and the same origin file, the file size is almose 3 more times then when using x5.
More Details:
I always use lZW compression, than the color mode I select paletted, and the final, choose document palette.
GIMP :: 2.9.1 Plugin Crashed / File TIFF Load
Nov 3, 2013I downloaded/installed the PPA for Gimp 2.9.1. It worked great for the first half dozen 16-bit tiffs.I use a few RAW converters to create these tiff tiles, RawTherapee, UFRAW, and the Sony software supplied with my A700 DSLR, Image Data Converter running through Wine.
At any rate, most of the tiffs I create now cause Gimp to crash when opening new files. I get this message: Plug-in crashed: "file-tiff-load" and Opening '/home/caruso/Desktop/PHOTOS from IDC/DSC06219.tif' failed:
Files created previously continue to open as normal.
I was so thrilled to have succeeded in installing 2.9.1 on my system, but now may have to uninstall it and fall back to 2.8.x.I realize that 2.9.1 is experimental and unstable, but would like to know if this is something simple that can be fixed.
CorelDRAW Graphics Suite X5 :: Export Pics From CDR As TIFF?
May 18, 2012if I have a page of pics in a cdr, how can I export each one as its own stand alone tif? seems like I could do that at one time but now when I select an image and export it, it shows a weird dimensions size not like the image.
for example if I select a 5x7 image and export as a tif the dialog box shows it as 5.93 X 10.4 when the image is in fact 5x7.
CorelDRAW Graphics Suite X5 :: TIFF Size Export
Aug 25, 2011we have just upgraded to x5 and now i have a big problem exporting tiff:
I work for print,not web. lets say i have a 50x50 cm layout. default dpi of document is set at 300. if i want to export that as a tif, it defaults at 300dpi in the export dialogue. until now, in x4, if i checked the maintain aspect ratio and just changed the dpi to lets say, 150dpi, it would only change the % of the size, not the actual size of the tif! now it changes somehow to double the size! but i want the same size to remain! also cm is selected, so no reason for it to keep the number of pixels!. i have to uncheck the maintain aspect and recheck it again to put the correct value in the size.
Also, i work with big documents, is there a way to stop previewing the jpegs in the export as jpg dialogue?
CorelDRAW Graphics Suite X5 :: Export As TIFF - Dimension And Resolution
Dec 19, 2011I create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
CorelDRAW Graphics Suite X4 :: Why Can't Export Page As Bitmap / TIFF
Sep 22, 2011One page of my drawing just will not export as any type of raster/tiff/bitmap. All the subsequent pages will happily export, but one page just will not. The export option defaults to 2% and 240cm height and width.
View 1 Replies View RelatedCorelDRAW X5 :: Change Default Settings In TIFF Export Dialog Box
Jan 22, 2011I am exporting graphics to TIF format and it needs to be exact same as in document, RGB code. I found out that if I uncheck the "Embed Color profile" it exports correctly with exact color codes as in Corel. However, sometimes I have found out that I have forgotten to uncheck that little box..
So I would prefer to have it unchecked by default. How would I do it?
I opened filters.ini and found the TIFF section, but I don't really understand anything there.
CorelDRAW Graphics Suite X6 :: Multiple Selections Export To TIFF
Aug 27, 2013How to export multiple selections as each selection to export to tiff despite of single tiff.
View 2 Replies View RelatedIllustrator :: Export Huge File As TIF
Jun 21, 2012I'm creating a huge Illustrator file, 16383 by 12288 pixels. This happens to be the maximum width that Illustrator will allow.I can export this size as a TIF, no problem. But I'd also like to export this file at 2x size, 32766 x 24576.
View 2 Replies View RelatedCorelDRAW X4 :: Crashed While Editing Text?
Dec 14, 2012Corel Draw X4 crashed while I was editing text but a box came up and asked if I wanted to save the file before I closed. I ofcourse said yes but I can't find the file anywhere.
View 3 Replies View RelatedCorelDRAW X6 :: Crashed When Open / New File Created
Jun 25, 2013Suddenly i am facing X6 crashing after an update 1. when open/new file, the software crashes : with the following messages:
Problem Event Name:APPCRASH
Application Name:CorelDRW.exe
Application Version:16.1.0.843
Application Timestamp:4fff8124
Fault Module Name:FillToolCore.dll
Fault Module Version:16.1.0.843
[code]...
CorelDRAW Graphics Suite X5 :: Huge File Sizes
Mar 19, 2012I do beer signs for a living. Sometimes I like to import other coreldraw files into my current work to take designs off of them, such as a curve or a portion of text. I then delete the unused parts. The problem is that whenever I do this, it makes the save file huge!
You can test this. Open an empty coreldraw file. Drag a few .cdr's into it. Delete everything you imported. Save the empty file. It will be the size of all those .cdr's combined!
CorelDRAW X3 :: Hard Drive Crashed / Need To Convert Exported File Back To CDR
May 3, 2011My hard drive crashed so I lost a lot of my CDR work. I was able to get some back in the form of JPG. These were files that I drew in Corel and Exported as JPG. Is there anyway I can get them back into Vector without re drawing? I figured there had to be a way since they were originally drawn in Corel.
View 2 Replies View RelatedCorelDRAW Graphics Suite X5 :: Crashed (Corel ARM) When After Exporting JPG Close The File
Apr 25, 2011I have a major problem with PhotoPaint X5 after SP2. I have an image of a movie poster from internet. Let's say about 1000x1500 pixels. I make the width 300 px. (height will be 440 or more) Than I make a new document of 300x430 pixels. Copy and paste the first file into the second. Move it up and/or down with the arrow keys to have a good composition. Than I combine the image with the background (shift/control/arrow down) and save it to rest.jpg. When I want to close the original image in CorelPaint I get the Corel A.R.M. window. I tried a few times without combining the image to the background and than I CAN close the file without crashing PP. I'm glad I found a workaround since I do these actions quit a lot for my movie and music database. But it took a lot a time to figure out where it went wrong. So according to my tests it must have something to do with combining the image to the background. Sometime when nudging the image a couple of times up and down crashses PP too when I then combine the image and background. At that point i don't come a far as exporting.
View 9 Replies View RelatedCorelDRAW Graphics Suite X6 :: Files Are Saving In Huge Sizes?
Oct 25, 2013Several days ago I noticed my files sizes were enormous. I was unable to even open them to work on them. Something that was once 517KB becomes 161MB the next time I save it.
After I installed the Corel update this morning, things were back to working as usual. But tonight it's back to the huge files. I saved a simple greeting card file - no halftones, no gradients, etc. It saved at 19.7MB. A few minutes later after making some small changes - saving again it was now 118 MB.
I tried saving to a lower version of Corel and ver 15 it was the same scenario. When saving to 12, 13, & 14 the files were normal, small sizes. But after a few hours even those versions were saving at huge sizes.
I've had a friend check her computer using the same file - she has the exact same computer & on Corel X6. All of her files are nice and small like they are supposed to be.
I've run virus checks and nothing is coming up. I am on Windows 7 64 bit.
Other than recreating all of my files every time I use them - I have no way of saving usable .cdr files.
Photoshop :: Advantages Of Storing Images In TIFF, TIFF LZW And TIFF JPEG?
Jul 5, 2004I am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
Lightroom :: 5.3 - How To Export As TIFF / PSD
Jan 2, 2014I just upgraded from 5 to 5.3.
Now I can't figure out how to export as tiff, PSD, original, etc.
I can only export as jpgs.
LR just doesn't offer those options anymore, it seems.
Have they been moved?
(OSX 10.7.5)
Illustrator Scripting :: How To Export TIFF
Mar 8, 2012How to export TIFF from Illustrator using Javascript. I could not find TIFF export type in Illustartor export type.
View 4 Replies View RelatedGIMP :: In TIFF Asks Export Every Save?
Aug 14, 2011I need to work in tiff, but everytime I hit save, gimp tells me I need to export.
can this be turned off somehow? it's a real rock in the shoe while working.
Illustrator :: Export TIFF - LZW Compression Not Working?
Nov 21, 2013When you export from Illustrator CS6 or CC in TIF format, you are given the checkbox option of LZW compression, but the output file does not seem to be compressed. When I open this TIF file in Photoshop and do a Save As, selecting the LZW option produces a dramatically smaller file than the one produced by Illustrator.
View 6 Replies View RelatedIllustrator :: How To Export 72 PPI Image To TIFF Without Pixelation
Aug 25, 2012I am designing images for printing on vinyl, with the print shop requiring 72 ppi .tiff files.Producing the file in Illustrator (.ai) and printing it produces a clear image on paper without pixellation.
However, when I export to .tiff @ 72 ppi, the result is heavy pixellation which I cannot print.How do I avoid this pixelation when exporting to .tiff in Illustrator CS6?
Illustrator SDK :: Export To TIFF In CS5 - Structure Of Parameters
Nov 4, 2011I need to export to TIFF in CS5 but don't know the structure of the 'parm'. Any clues out there on where to find this information?
View 3 Replies View RelatedAutoCad :: Export Drawings In High Quality (TIFF)
Sep 30, 2013is there a way of exporting my AutoCAD drawings in high quality? Maybe Tiff?
The problems I have with exporting is that if export a drawing as a *.wmf the thick lines come out too thick even when using the 0.3 mm thickness. If i use the 0.25 mm thickness the lines are as thin as with the default thickness.
The contour lines of an image I imported into my AutoCAD drawing are coming all blurry when I export into wmf file even when using the 600 dpi resolution (highest available on the menu).
Inside my AutoCAD drawing my image map has a very high quality but when I export it, with AutoCAD polylines on top of it, the drawing comes out horrible.
I painted a blue polyline to represent a river in a contour map. This is for a civil engineering project. When I export the drawing, the polyline comes out too thick and the image behind comes out blurry. This happens even when using the highest definition possible for a wmf export (600 dpi).
I've read in another thread about a way of exporting into tiff. I followed the directions but the thread is not well explained. It doesn't say whether it is necesary to have or buy certain software. And it doesn't say what to do next to export the tiff drawing.
how to export high quality AutoCAD drawings?
Photoshop :: How To Export Layered TIFF Files For Viewing In Preview
Dec 10, 2012Being an architectural photographer I create a lot of layered files with many exposures with different lights on and daylight separately. I always save my layered files in a folder called Layered files in the project. I also save flattened 8 bit Tif's at full resolution for my client as a print file in a separate folder along with another folder for web and device optimized files. When my client opens some of my flattened files they tell me the only see one layer. When I open some of them in Preview I get the same result. I only see the last layer I put into my layered file. But when I open the same photo in Bridge I see the full flattened file as I saved it. What can I do about that?
View 3 Replies View RelatedLightroom :: Exif Tool And Export JPEG And TIFF Files
Jul 14, 2013I run Lightroom 4.4 under Apple OS X10.4.4..When I export files Exif Tool (in Graphic Converter) under ICC header shows for Jpeg "Primary Platform = Microsoft and for = Tiff Apple; and under ICC Profile Color profile for Jpeg = HP but Adobe 1998 for Tiff. I can see that there is a difference between the profile for Jpeg and Tiff (eg sRgb and Adobe1998) but don't follow why the Primary platform differs and shows Microsoft for Jpeg and that the jpeg profile is HP
View 2 Replies View RelatedLightroom :: 5 - Export Photos In TIFF Instead Of JPEG For Large Prints?
Feb 15, 2014I want to blow up some prints into large formats.... How can I export in TIFF instead of Jpeg in LR5?
View 3 Replies View RelatedCorelDRAW X6 :: Crashed When Try To Print / Print Preview?
Feb 26, 2013This file will crash when I try to print or print preview.
[URL]
No problem printing other files.Btw, from Document Properties, it shows that there are two RGB fills, which I cannot find.
That's the reason why I go into Print Preview to look at the separations.
CorelDRAW Graphics Suite X6 :: Export To Webpage Directly Since HTML Export Doesn't Work?
May 17, 2013Will Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
