Some days ago, I installed the x6 version. Now I find that, when export to Tif using x6 with the same settings and the same origin file, the file size is almose 3 more times then when using x5.
More Details:
I always use lZW compression, than the color mode I select paletted, and the final, choose document palette.
We just upgraded from Corel X4 to X6. When exporting a file into tiff in X6 , some images are creating extra lines that run into space. The images are made form cgm files, have not the best quality and relative old but in X4 I never had a problem with that.2678.test_c_drw_000_X4.tif4722.test_c_drw_000_x6.tif
Any new setting that needs to be on or off ?
I noticed that in X4 there is an option to apply ICC profile which I can't find in X6.Does this influence this?
I tried export cdr to huge tiff image, 300dpi and 25m x 3m size. The problem is my X6 crashed, i am using Win XP SP3 4gb ddr dell optiplex 380 series.
View 4 Replies View Relatedif I have a page of pics in a cdr, how can I export each one as its own stand alone tif? seems like I could do that at one time but now when I select an image and export it, it shows a weird dimensions size not like the image.
for example if I select a 5x7 image and export as a tif the dialog box shows it as 5.93 X 10.4 when the image is in fact 5x7.
we have just upgraded to x5 and now i have a big problem exporting tiff:
I work for print,not web. lets say i have a 50x50 cm layout. default dpi of document is set at 300. if i want to export that as a tif, it defaults at 300dpi in the export dialogue. until now, in x4, if i checked the maintain aspect ratio and just changed the dpi to lets say, 150dpi, it would only change the % of the size, not the actual size of the tif! now it changes somehow to double the size! but i want the same size to remain! also cm is selected, so no reason for it to keep the number of pixels!. i have to uncheck the maintain aspect and recheck it again to put the correct value in the size.
Also, i work with big documents, is there a way to stop previewing the jpegs in the export as jpg dialogue?
I create a new black document with rendering resolution set to 150dpi.
If I export the artwork as JPEG, and check "Maintain Size", I'll get the artwork in correct dimension and resolution. However, if I export as TIFF, the resolution by default is 72dpi, and if I increase the resolution to 150dpi, the dimension reduces accordingly, ending up with a smaller bitmap exported.
One page of my drawing just will not export as any type of raster/tiff/bitmap. All the subsequent pages will happily export, but one page just will not. The export option defaults to 2% and 240cm height and width.
View 1 Replies View RelatedI am exporting graphics to TIF format and it needs to be exact same as in document, RGB code. I found out that if I uncheck the "Embed Color profile" it exports correctly with exact color codes as in Corel. However, sometimes I have found out that I have forgotten to uncheck that little box..
So I would prefer to have it unchecked by default. How would I do it?
I opened filters.ini and found the TIFF section, but I don't really understand anything there.
How to export multiple selections as each selection to export to tiff despite of single tiff.
View 2 Replies View RelatedI am cleaning up the Hard Drive on my Mac G4. My scanned images are taking a great portion of the 80 Gig drive. I finished clearing my external drive by removing nearly 60 gigs of images by storing them on DVD. I will do the same for the Mac drive.
My trouble is that all my images are stored in TIFF format which takes up enormous space no matter the storage. Since I output images in various sizes, mainly prints, to 30 x 40 inches, I need a master image archived in the best format for such. However, I do not want to fill my drives, or DVD, with large files. Code:
I just upgraded from 5 to 5.3.
Now I can't figure out how to export as tiff, PSD, original, etc.
I can only export as jpgs.
LR just doesn't offer those options anymore, it seems.
Have they been moved?
(OSX 10.7.5)
How to export TIFF from Illustrator using Javascript. I could not find TIFF export type in Illustartor export type.
View 4 Replies View RelatedI need to work in tiff, but everytime I hit save, gimp tells me I need to export.
can this be turned off somehow? it's a real rock in the shoe while working.
When you export from Illustrator CS6 or CC in TIF format, you are given the checkbox option of LZW compression, but the output file does not seem to be compressed. When I open this TIF file in Photoshop and do a Save As, selecting the LZW option produces a dramatically smaller file than the one produced by Illustrator.
View 6 Replies View RelatedI am designing images for printing on vinyl, with the print shop requiring 72 ppi .tiff files.Producing the file in Illustrator (.ai) and printing it produces a clear image on paper without pixellation.
However, when I export to .tiff @ 72 ppi, the result is heavy pixellation which I cannot print.How do I avoid this pixelation when exporting to .tiff in Illustrator CS6?
I need to export to TIFF in CS5 but don't know the structure of the 'parm'. Any clues out there on where to find this information?
View 3 Replies View Relatedis there a way of exporting my AutoCAD drawings in high quality? Maybe Tiff?
The problems I have with exporting is that if export a drawing as a *.wmf the thick lines come out too thick even when using the 0.3 mm thickness. If i use the 0.25 mm thickness the lines are as thin as with the default thickness.
The contour lines of an image I imported into my AutoCAD drawing are coming all blurry when I export into wmf file even when using the 600 dpi resolution (highest available on the menu).
Inside my AutoCAD drawing my image map has a very high quality but when I export it, with AutoCAD polylines on top of it, the drawing comes out horrible.
I painted a blue polyline to represent a river in a contour map. This is for a civil engineering project. When I export the drawing, the polyline comes out too thick and the image behind comes out blurry. This happens even when using the highest definition possible for a wmf export (600 dpi).
I've read in another thread about a way of exporting into tiff. I followed the directions but the thread is not well explained. It doesn't say whether it is necesary to have or buy certain software. And it doesn't say what to do next to export the tiff drawing.
how to export high quality AutoCAD drawings?
Being an architectural photographer I create a lot of layered files with many exposures with different lights on and daylight separately. I always save my layered files in a folder called Layered files in the project. I also save flattened 8 bit Tif's at full resolution for my client as a print file in a separate folder along with another folder for web and device optimized files. When my client opens some of my flattened files they tell me the only see one layer. When I open some of them in Preview I get the same result. I only see the last layer I put into my layered file. But when I open the same photo in Bridge I see the full flattened file as I saved it. What can I do about that?
View 3 Replies View RelatedI run Lightroom 4.4 under Apple OS X10.4.4..When I export files Exif Tool (in Graphic Converter) under ICC header shows for Jpeg "Primary Platform = Microsoft and for = Tiff Apple; and under ICC Profile Color profile for Jpeg = HP but Adobe 1998 for Tiff. I can see that there is a difference between the profile for Jpeg and Tiff (eg sRgb and Adobe1998) but don't follow why the Primary platform differs and shows Microsoft for Jpeg and that the jpeg profile is HP
View 2 Replies View RelatedI want to blow up some prints into large formats.... How can I export in TIFF instead of Jpeg in LR5?
View 3 Replies View RelatedWill Corel6 (or later) ever be able to export to a web page directly since the HTLM export doesn't work (drops links). The Corel Web program, or what ever its name is, was a joke. Its amazing that Corel work puts its name on a program that you could not open a CorelDraw file.
My current work around is to export to a JPG and then import that into dreamweaver and add the links there, then post. A pain but it works.
I'm using Draw X5 to make a diagram using lines, circles, etc. When I try to export this to .tiff, the resulting images are very blurry and unusable. I'm using 300dpi without compression. I've tried with and without anti-aliasing. I can export the exact same thing to .jpg or .gif and they look perfect. Unfortunately I'm submitting this for publication and they require 300dpi .tiff files as the format.
View 6 Replies View RelatedHow to save as coreldraw file in .tiff format
View 6 Replies View Relatedif I create a new document, say A4, and then import a TIFF photo to that document, the photo appears much larger than my background A4 document. So, do I edit my photo and then export it as a TIFF again, or should I resize my background document from A4 to match the size of my photo before exporting? What I'm asking is that I don't want to lose the original size of my TIFF image, so when I export my image will CD save the TIFF image in it's original size or resize it to that of my created A4 document?
View 1 Replies View RelatedTiff files flipping on both horizontal and vertical when importing? Client gave me a Corel PDF from an originally imported Tiff image and it's done it. Perhaps something when importing?
I can bring it in ok in CD v5.
1. How to fit properly A4 size Rectangle in the document? because after finish work when I converted the the cdr file to TIFF, it shows the image is not fit in the document and also the print does not comes out properly.
2. An other problem I have is, when I converted cdr file to TIFF and even JPEG, color of drop shadows which was black, is appears as a white color....what should I do? how to change the color setting?
I am having issues with the batch process function with X6 photopaint.
that is a simple conversion of 20 or more images from TIF to CPT. i get the message
"Images failed to load. Some formats are not supported for batch processing". I have never encountered this problem before.
This was exported to tif and sent to the printer, the glow is a white outer glow.
As I usually do I exported the whole thing to a TIF and low and behold black lines in the print.
This was the bullet proof way of getting what you saw on the screen to hadcopy but sadly no more.
Can this be addressed in SP1, as it puts a serious hole in all the signies bag of tricks for that matter any body who wants to output special EFX from Corel.
I'm using Coral Draw Graphics suite X5 built 15.2.0.686 SP4 (all available updates installed) This is a bug I have detected.
Start a new CorelDrawFile and import a .jpg,after putting e.q. some arrows on it I choose "export" and exports a .tif - file to a folder.
For further manipulations I also save the .cdr - file to another Folder. Insofar everything works well.But if I reopen the .cdr-file and do my manipulations at my picture and then I try to export the .tif - file to the folder, where the before exported .tif is situated, corel well notice that the old file exists and asks for replacement,BUT instead of exporting the .tif - file the .cdr file will be saved. Got this failure reproducible by doing it the same way.
not till I exported a other file type .jpg or any other and switches back to .tif, exporting the .tif file works and the old .tif - file will be replaced by the new one.
I came across an interesting problem. I was using PaintShop Pro to import a RAW image from my camera, then export as a TIF for use in CDGS X6. When I tried to import the file into CorelDRAW or PhotoPaint, I got an error message:
(X) Invalid compress data
I could see a thumbnail image in WIndows, and I could open the file in IrfanView. Re-saving the TIF from IrfanView allowed me to open it in CDGS.
I thought the problem was with PSP, and reported the issue to the product team, but then I tried exporting the same TIF from PhotoPaint (from the same RAW image file), and when I tried to re-open the TIF, I got the same error. So PhotoPaint could not read the TIF exported from... PhotoPaint!
Smaller files don't seem to be an issue, but my camera files are in the neighborhood of 5000x3000 pixels, and the TIF files weigh in at around 50MB.
I am using PSE 12 as an external editor for Aperture. When I ask to use an external photo editor, Aperture creates a .tiff file in my Aperture folder, launches PSE 12 and tells it to edit that .tiff file. This all works great. When I am done editing in PSE 12, I ask it to save the file and it saves it back to the original Aperture folder with a .tif extension. I can instead say "save as" and then it suggests the file name with a .tif extension. When I correct the extension to .tiff it warns me that I'm going to overwrite the file (exactly what I want!). I say yes and then I find out that PSE did not overwrite the file, but wrote it as a .tif file anyway. I have to go to the folder, delete the .tiff file and rename the .tif file to .tiff and then everything is fine - but what a hassle.
View 3 Replies View Related
