CorelDRAW X6 :: Bezier Tool - Connection / Object Completion
Jul 17, 2013
I use the bezier tool A LOT to create objects... and I've noticed that when I'm going from a curved line in an object to a straight line to complete the last line of the curve, I'll often lose that last node (it'll just disappear).
What I end up needing to do is place a node between the last node and the first (completion node) to allow that straight line to work properly... then I just go back and delete the unneeded node after the object has been closed.
View 2 Replies
ADVERTISEMENT
Aug 26, 2011
I just started using CorelDraw X5 (previously used version 10 or 12) and I can't find the Bezier tool. When I watch tutorials it looks like it should be under my curve tools, but it definitely isn't. Do I have a setting turned off or something... or is this a glitch?
View 10 Replies
View Related
May 21, 2008
I'd like to be able to do calligraphy with my Wacom pen but I find the above anomally. Does anyone know how you can achieve such a thing in CS2? I've only been able to attempt calligraphy with a brush or pencil, and although I've managed to tilt the pencil / brush and achieve thick and thin strokes (but not very satisfactorily) I can't find out how to alter the angle.
View 6 Replies
View Related
Feb 21, 2014
I created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)
View 19 Replies
View Related
Oct 18, 2011
know the shortcut key for bezier tool and pick tool.
View 3 Replies
View Related
Nov 6, 2012
dimension tool.jpg
See the figure below.
Is there any way to adjust the dimensions, when dragged, with regular distance from object?
See differences by red arrows. The intention is that dimensions keep a pre-set regular distance.
View 5 Replies
View Related
Jul 23, 2011
I don't know if I did something wrong, I click Artistic Media brush and click on the page and I get the message again and again.
The Eraser tool requires that you select an object.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 4 Replies
View Related
Jan 14, 2012
not being able to change colors of an object while using the Interactive Fill Tool? That is, change an existing color or add/delect a color to the gradient. I have to delect and reselect the object to change colors. I have to do this each and every time want to make a color change. Without this functionality I am not sure what the point of the tool is.
View 14 Replies
View Related
Apr 21, 2011
Im using the bolted connection tool and when i chose all of circluar reference and pick out my bolt and nut the tool will only draw one bolt and ignore all the other circular references. It previews all the bolts just fine ut will only place a bolt in one of the circular references.
View 7 Replies
View Related
Mar 22, 2013
I have found that my computer has slowed down when using autocad. I am thinking it is related to the blocks and possibly exploding them but when I delete and purge the programme still runs really slowly ie takes up to 5 seconds for a command to complete. Also when I try to copy and paste from one drawing to another it can take up to 15 mins or more.
View 2 Replies
View Related
Oct 22, 2013
I have a problem acessing the fatigue calculation panel in the bolt connections´ tool. Whether I press enable or disable I simply can´t acess it. What should I do to access it?
View 4 Replies
View Related
Apr 14, 2014
I'm starting my first project and I've added a song but it cuts off halway through when I play preview. How do I increase the timeline to allow the song to play to completion?
View 3 Replies
View Related
Dec 15, 2011
I have problem with 3 users from about 75. When using the publish command inAutocad 2010 (1 user) and Civil 3d 2010 (2 users) a temporary copy of the drawing is opened while the particular layout is being published but on completion this temporary copy of the drawing is not being closed. This is leading to problems when a user has lets say 5 drawings open that require publishing. When finished the user has 2 copies of each drawing open and sometimes my select the wrong drawing when making further changes.
I have tried a repair on Autcad but that did not work.
View 3 Replies
View Related
Sep 4, 2013
my major commands: (save, export, copy, etc.) are all frozen until I sign in, BUT when I attempt to sign in Corel error message pops up that I am not connected to the internet. I work at a large design firm and have full access to the internet, no firewall or anything and have no other problems connecting, so this is most likely a Corel issue and not my connection, I believe. Also, other people at my office have it installed and no problems.
View 14 Replies
View Related
Jul 25, 2013
I downloaded X6 patch #1 with no problem, but then I downloaded patch #3 and when I press Continue to install I get a notice: An Internet connection required. connect to the Internet and try again... But I AM connected to the Internet! I have no options how to proceed.
View 3 Replies
View Related
Dec 14, 2013
Resizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 9 Replies
View Related
Sep 17, 2011
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies
View Related
Dec 9, 2012
Is there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
View 1 Replies
View Related
Apr 3, 2012
4621.CorelDRAW Clone Bug.mp4
Trim the master object and the cloned object gets deleted.The master object cannot be directly trimmed, so I grouped it with another object, which seems to enable the shaping tools. check if this behavior exists in X5 also.
I have inserted a clip about the problem. Maybe other users and the Corel staff will check it out.
View 2 Replies
View Related
Oct 24, 2008
Occassionally the object properties in my object manager will dissappear and I am unable to bring them back. I have tried toggling all the buttons on the manager, restarting corel, resetting corel to it's default settings and restarting my computer but nothing will bring back the properties. It does not happen on every single file but it happens often enough to be a pain. I have attached a picture of what the object manager looks like.
View 6 Replies
View Related
Apr 3, 2013
There is problem with my CorelDRAW X6.
After I import different files in my working file, it's getting hard to work- RAM(16GB) is getting completely full and its almost unworkable!
I checked out Object Manager and found stack with "SVG data" and "Locked SVG data" object there under some basic shapes.
Stack is about from 10000 to 100000... Some times even more, but its not possible to select all them because Corel just stops. What is that- "SVG data" and "Locked SVG data" object and why they are so many there?
View 5 Replies
View Related
Jun 27, 2013
It involves right clicking on an object in Corel Draw X6. I had this same issue in X5 too.
My issue is that if I select an object and then right click on that object (I right click on the "X" in the middle of the selected object) it will select the object below the "X." In other words, I can only ever get the right click menu to appear on the object I select if there are no objects below it.
View 5 Replies
View Related
Dec 23, 2012
I need to find a way to cut the shape of one object out of another object. In the above photo I need to be able to print the black crosses without the printer printing the white ink under them (you can see where the black ink is not adhering to the white ink very well).
View 11 Replies
View Related
Jul 26, 2011
how you can trim an object to the shape of the object on top?
View 9 Replies
View Related
Jun 26, 2013
How do you get bezier curves in PhotoShop CS6 to act the way they used to in CS5.5? In 5.5 i would be able to move/adjust the path with the direct select tool and the control arms would stay at the angle they were created at. In CS6, depending on where you direct selected the path, would depend on how the path could be/would be adjusted. And the control arms have become more fluid, rather than static. They do not keep the angle they were created.
View 2 Replies
View Related
Oct 21, 2008
PS CS3
Windows XP
how to use Bezier curves for PhotoShop CS 3.
View 1 Replies
View Related
Jun 9, 2006
i'm trying to get bezier curves on SHAPES (Spheres, Cubes) in Photoshop CS...so i can reshape them...NOW i'm talking curves that are like contour lines ON the SHAPE...
example...
if you create an ELLIPSE from the ELLIPSE tool...you do SOMETHING to it (which i cant seem to remember) and you see LINES going up and down and left and right on it....and u can just freehand transform it.
View 5 Replies
View Related
Jan 29, 2013
controlling a bitmap's tiling amount with a Bezier Float node in the slate material editor.
If I link a bezier float controller to the tile size of a normal bitmap (non real-world scale) it works as expected, i.e. if I set it to 4, then the bitmap tiles 4 times.
However if I link the float controller to a bitmap set to real-world scale, then it seems to work in reverse. i.e. if I set the float controller to 5, then the UV size appears as 0.005m, and if I set the bezier float controller to 0.005, then the UV scale size is set to 5.0m.
It seams as though in the second example MAX is taking the bezier float value, using it as a tile amount, then just for display purposes it converts it to a real-world size. I can work with it now that I know what it is doing, but it is a little unintuitive.
View 4 Replies
View Related
Nov 22, 2004
method to distort a rectangle?
i need to control it precisely, so the standard-filters don't really help..
View 6 Replies
View Related
Aug 2, 2011
I've read on the internet that to make a Bézier curve, you are supposed to right click, i believe? It says to press the right mouse button. When I right click, however, it just makes another cubic spline line of secondary color.
View 1 Replies
View Related
Feb 15, 2014
I have created a test bezier curve in Adobe Photoshop, saved it as a .ai file for import into Maya, and imported the curve successfully. However when I try to revolve it to create a sculpture, it revolves around a pivot point which is in the middle of the scene. Is this error because of the .ai file format? I don't have Illustrator as such, just using a .ai export from PSD so I can use PSD which I know better - to get the curve in the first place. Is there a way to look at the curve in an editor of some sort and precicesly locate the pivor point, reset it etc? The file is also not yet in a default project, as I'm just testing first. I am a rank beginner, having used Maya for 4 months, 8 years ago, and now need to learn the program for work.
Additional notes: I did get the revolve to work by manually moving the pivot point but it wasn't very precise, and I'd like to know how to do this ahead of time as I have to make quite a lot of these...
View 4 Replies
View Related
