I have found that my computer has slowed down when using autocad. I am thinking it is related to the blocks and possibly exploding them but when I delete and purge the programme still runs really slowly ie takes up to 5 seconds for a command to complete. Also when I try to copy and paste from one drawing to another it can take up to 15 mins or more.
View 2 Repliesi like to work with block system in my project , but i dont like to use block editor or refedit for every action inside my block ...i found some lisps for add or remove objects from blocks but not enough for dont use to block editors , i need to lisp for use ordinary command for blocks without get them inside if ther is possibility ...
View 1 Replies View RelatedQuick one on Dynamic blocks.... we are using Dynamic blocks more and more as a company, we are finding that when in a drawing which contains lots of dynamic blocks, then go into Dynamic Block Editor - amend the block - Then when closing the block Editor to get back into the drawing the drawing goes really slow untill we close it down and restart it.
Is there a setting we need to change OR is there something obvious that we are missing. i.e should we be minimizing the amount of dynamic blocks in our drawings or uncomplicate them?
I have problem with 3 users from about 75. When using the publish command inAutocad 2010 (1 user) and Civil 3d 2010 (2 users) a temporary copy of the drawing is opened while the particular layout is being published but on completion this temporary copy of the drawing is not being closed. This is leading to problems when a user has lets say 5 drawings open that require publishing. When finished the user has 2 copies of each drawing open and sometimes my select the wrong drawing when making further changes.
I have tried a repair on Autcad but that did not work.
I use the bezier tool A LOT to create objects... and I've noticed that when I'm going from a curved line in an object to a straight line to complete the last line of the curve, I'll often lose that last node (it'll just disappear).
What I end up needing to do is place a node between the last node and the first (completion node) to allow that straight line to work properly... then I just go back and delete the unneeded node after the object has been closed.
I'm starting my first project and I've added a song but it cuts off halway through when I play preview. How do I increase the timeline to allow the song to play to completion?
View 3 Replies View Relatedhow to make my photshop application fast few days ago it was working good but now its performance is slow and my computers speed is also slow. How to fix it?
View 1 Replies View Related(defun CELBLKS ( / e blk ss blkl)
(setq blkl "" ss (ssadd))
(while (setq e (entsel "
[Code]....
i have this lsp, it works great but how can modify it if i want select with a window.? exemple: if i have 3 differentes blocks, i want to select them with windows and the lisp select all blocks that are identical of those 3.?
We have a new title block which now contains various fields to automatically populate the drawing number, number of sheets, issue etc. The problem we have is when we go to zoom all or extents on a layout tab it moves the layout to the right each time. If we only have one layout or we use a plain title block i.e. with no fields, the zoom works fine (layout stays put in the center). This is also true if we directly insert a field onto the layout - again no problems.
The cause of the problem only happens when a block containing a field is inserted onto the paper space of a layout and,there are multiple layouts containing blocks with fields.
How to find no of times specific blocks used in a drawing?
View 9 Replies View RelatedHow do I manipulate a height parameter all of the dynamic blocks in the drawing from one single field? Say a field located in the drawing properties or on the drawing itself.
For example: Multiple blocks of different walls of same height with other blocks of things on located on those walls, dependant on the wall height, all linked to and changed by a single field. Possibly a Wall Height field located in the custom tab of the drawing properties.
I can pickout each of the blocks and change them at the same time in properites menu because they all share the same parameter name. I would just like to have that height parameter of every block in the drawing, that has that specific parameter controled by a single field. Which I could enter a new height at anytime that would change every block in the drawing to that height.
We used a bespoke program to convert our drawings to Java applets for web usage. This does not cope with dynamic blocks at present and we have started to receive drawings from our clients using them.
I need to replace this with standard static blocks based on one of two criteria. Either:
1) Replace based on visibility state (have generic chair block with multiple different chair types set by visibility type, need to replace depending on which type it is set as)
2) Replace based on parameter (have table with size set by dimensions, need to replace with static block for each dimension)
I have over 100 blocks that I need to add the exact same objects and visibility state to. Is there a way to globally make this change, or even to copy the visibility states from one block to the next without having to recreate the states in each block? I thought I had previously run across a routine on here that would make changes to multiple blocks at once, but I can't seem to find it now.
View 1 Replies View RelatedI have a project in 3D that I would like to export to Stadd. This requires lines rather than blocks. Is is possible to convert the blocks in the attached dwg file to to lines that are centered on those blocks?
View 9 Replies View RelatedThe AttSync command does what it advertises fairly well. My problem is that I have thousands of small blocks in a single drawing. (My current drawing has 2100 block references with four attributes in each one.) I may change the attribute values in a few of them and need to re-sync the attribute locations. When I run AttSync it updates every single block insertion. One of two things are desired:
1)Flag each block insertion as having been sync'ed, reducing the number of objects requiring synchronization when AttSync is called again. Provide a way to force all to be sync'ed.
2)Allow a selection set in the AttSync command after selecting the block to sync.
Either or both of these would a great time-saver for those of us with large numbers of blocks with attributes.
I built a building foundation for a grading plan and I have another building that is the exact mirror of it. I have tried to mirror it. Didn't work. I created a block of the feature lines and inserted it with a -1 x value but I can't explode it. I tried the regular explode and xplode. Neither worked. I can use the the block to draw feature lines over but it just seems so much easier if I could figure out how to explode the block.
C3D 2013
I have the same block repeated multiple times in a drawing, and I want to delete the last attribute in all of the specific blocks. When I edit the block in block editor, the attributes do not show up. After I explode the block, there is no text. The attached image shows the properties of the block.
View 9 Replies View RelatedI am using AutoCAD 2013 on Windows 7 platform
95% of the blocks on the palettes have the images associated, and named, per the block name.
I have 48 blocks that the images are named like this "Block tool_F2149212-4649-41F5-95E6-4A978EC376F5_2".
I have tried resaving the blocks and recreating the blocks to no avail.
How to get these few blocks to have images that are associated with the actual block name and not the generic "block_too" name?
I am trying to update blocks for a client. Each block has a line of text with the block name in it. I would like to automate these with a field so that if the block name changes or a new block is created from that one, then the field would update as well. I am running AutoCAD LT 2012 currently.
View 8 Replies View RelatedI wish to have a single dimension alter the dimensions in a set of nested blocks, similar to shared parameters in Revit. For example, I have a circle that has a fixed diameter that I wish to control in all blocks. I have set the diameter to barDia so now I wish to manipulate the dimension from outside the block.
Am I able to share the parameter across all the blocks?
I was trying to alter the standard blocks on the tool palette. How I messed everything up but I basically have two huge problems now.
1. I am missing the necessary default blocks that should be under my edit block directory.....all the Aecb files.
2. Now when I try and put in a receptacle or any other standard block a triangle with an exclamation point shows up upon insertion.
I attached a picture of the "edit block definition" and the troubled symbols.
I received a file that has a large number of blocks with unnamed blocks inside. I need them all to be by layer, and i really don't want to explode it.
How can I can do it?
I have been working on a drawing with 3 different dynamic blocks for several weeks and everything has been working perfectly. However, all of a sudden this afternoon, the text in all 3 dynamic blocks disappeared and will not display on the screen in paper or model space, and does not print.
As best I recall, I was creating a polyline viewport when this text disappeared.
I cannot turn the text on in these dynamic blocks. The text in on layer 0 which is on, and is unlocked and unfrozen. Additionally I have turned on, unlocked and unfroze all layers in the dwg and this does not work. I have also checked the text layer in the block editor and it is on layer 0.
When I click on any of the blocks, all the information appears to be correct, ie: door numbers, text style, etc. The text, however, just does not appear. Also I have never set any invisible text parameters and when I open the block editor, nothing in the invisible text area is selected or select-able.
Previous versions of this drawing, which I saved yesterday, display all block text perfectly. Perhaps there is a setting I accidentally hit which caused this problem?
I have tried repeatedly turning on all the layers, unfreezing, unlocking, changing parameters in the Style menu. I closed Autocad and turned the computer completely off and back on again.
how can i separate same type of blocks in dynamic blocks? all layers are same..
View 9 Replies View RelatedI have a program that plots all blocks to png - open a dwg, get a list of all blocks, insert each into an empty dwg, zoom extents, and plot using the OOTB PublishToWeb PNG.pc3. In the attachments is an example of the problem. When I do this manually from a layout, I get the correct image. When I plot from code using the same PC3 file, draworder is being ignored.
It works if I apply transparency to the block and use ps.PlotTransparency = True, but I would prefer not to have to tell the user to change the block definitions. Is there a plotsettings property I am missing?
I want to create some symbols which includes text. For example, I have a square with an "F" centered within the square. The problem I am having is when I insert the block into a drawing and rotate it, the "F" also rotates. Is there any way to make it so the "F" is always horizontal no matter how I rotate the block?
View 2 Replies View RelatedI've just started to learn how to use Annotative Blocks and i'm running into what is probably a very simple problem. I'm creating a block and want to assign annotative scales to it. Once created, I insert the block into the drawing I need to use it in, and the only scale that shows up is the scale that is active when inserted.
All the other scales I added when creating the block are gone and I then have to assign the scales to the block again. I would prefer not to have to manually assign the scales every time the block in inserted into a drawing.
when I modify a dynamic block, that change persists to all other dynamic block that I have in the drawing. For instance, when I stretch the tail of a section callout, every other section callout stretches as well, which is quite inconvenient as you can imagine. I need each individual blocks changes to be independent of the others.
View 8 Replies View RelatedHow can I use the commands in macro .
View 4 Replies View RelatedI have set up my standard commands to use a certain layer, ie
~Dimension command switches to my Dimension layer
~Leader command switches to my Text layer
I don't have my Line command set to any layer. I switch layers before drawing a line. I like drawing lines on different layers as needed. I don't like the default to be the Object layer.
Is it possible to have a pop menu open when I select a command to choose a layer? I would like to set a second line command with that feature.
The issue I am having is I can't see some of my commands. For example, if i paste from the clip I cannot see whatever it is I pasted until I say where I want it.
View 9 Replies View Related