If I use 2 monitors to display 1 image with the image extending from one monitor into and across the second monitor, can I make a screen shot of the entire image without any break in the middle where it crosses from one monitor to the other? Will it be one continuous screenshot of the entire image, even though the image is displayed on 2 monitors?
View 6 RepliesI have an image i'm trying to make a contour with. I want the inside object to contour out to the outside object. Every time i try to create the contour it says offset too large. I've tried i set the offset to 0 but it still doesn't work. I want the dark green to fade out to light green.
View 7 Replies View Relatedhow to make an image have a transparent backround! the image was imported as a png file, but was still pixelated so i turned it into a bitman by using the clipart outline smoothing feature. but when i try to export it as a png, there is a white block behind the image. i do have the transparenty box selected when trying to export, but that white block behind the image is still there.
View 3 Replies View RelatedI'm a coreldrawX4 user. I would like to print a composite image of my identification badge on a T-shirt. How would I do this?, should I take it's picture with my cell phone-forward it to my e-mail address then import it into corel or have it scanned and forwarded to me. I don't have my own scanner so I was thinking Staples or Kinkos.
View 2 Replies View RelatedWe recently obtained second monitors. Since then we occasionally get gray blocks in the Inventor browser.
Bad
Good
Is this a graphics card issue?
Is it a bad cable or adaptor?
Is it the monitors?
This machine has NVIDIA Quadro 2000 graphics card. The monitors are plugged into the ports as shown below. The screen resolution is set to 1680x1050x59 hertz per monitor. The monitors are ACER V226WL.
Dell Precision T3600 - Windows 7 SP1, 64x
16GB RAM, NVIDIA Quadro 2000 (driver 9.18.13.3165)
Inventor 2013 SP2 Update 2
AutoCAD 2013 SP2
Vault Collaboration 2013
3DConnexion SpaceNavigator
I am really new to photoshop... i have been trying to make vector art from live images but failed ...make this given live image like the another image which is vector.
View 3 Replies View RelatedI'm running Lightroom 4.1, but this issue has been present since Lightroom 3.0 using two different, modern ATI Graphics cards, same Sandy Bridge PC.
On any image, shot with any camera, after a few minutes the info display (image information) and the surrounding area will corrupt. It looks like there's a rectangular box about the width of the image and the height of the info display, where the border of the rectangle is made up of bits of the image, hope that makes sense.
Anyway, pressing "I" to cycle through the info display removes the corruption, but then it returns a few minutes later.
I have about 150 photos loaded into my drawing and scaled in order to perform measurements on them. I'd like to have file names of the images displayed next to the images. Is there a way to automatically display file names for all the images, so I don't have to do it by hand?
These are photos of microfossils and the all look pretty similar, so telling them apart visually is often a problem.
I'm using Win7 with LR4 and have dual monitors. When i switch to the second monitor in LR4 it then displays both LR4 windows on both monitors. In other words it just shows the same thing on each monitor.
View 1 Replies View RelatedI need to make a bright pink/hot pink type of color for the web/monitors.
I been through tons of pantones, art books, etc... All the pinks look like pastel or extremely dull, not bright at all, like that hot pink, neon pink type of color.
1. is there a certain pantone/color/etc that will give me that hot pink color that will look hot pink on a website? if so what is it?
2. if there is no color for this, is there some way to simulate it?
Originally, I'd used linear transparency on image#1 which caused a line that showed up only on a Ricoh-generated hard proof. I kept the transparency of image#1 and converted it to a bitmap, so no lens, but still the line. Finally I ditched the transparency I'd applied to image#1 and placed image#2 over image#1 to achieve the fade-out of image#1 that I had originally intended. Now image#2 is creating a line only evident when printed on that bloody Ricoh!
View 4 Replies View RelatedI just finished a logo design in corel draw x5.The design was made on a a4 dimensions.I copy the elements to paste them into a much smaller canvas but the image when minimized is pixelated not vectored as the original.
How can I paste the image and the image is as the original (vectored)?
I am currently writing a book that will initially be sold as a PDF but may later go on the i Book store, however I don't have a Retina display myself and what is the best practice for making screenshots from a normal display look acceptably sharp on a Retina display?
I have Photoshop along with the iOS simulator that shows how the iPad or iPhone will look if they can be used in some way but I mainly need to get menu items and dialogue boxes from various applications in OS X and Windows looking good on Retina screens. I really don't want to pay out for a Retina display purely for this task that would only take a few hours of work at most.
I have two images. I want to make one image look as though it is coming out of the other. In the middle of the image. I have an image of a forge. and the other is a saxophone. I want to combine the two so that it looks like the sax is be made from the fire in the forge. I just want the bottom of the sax not be shown.
View 1 Replies View RelatedI received this photo and was asked to try make it look better.
I was never good at making old/bad looking images look better.
I can use the "stamp tool" to clean the dots but what about the rest
of the photo.
I cannot seem to get this image to display!
I originally put it through Photoshop, it didnt work. Now its been through every program I can think of and i resaved it.
Still no go!
It DOES work if it is loaded into a browser as the sole content, but not if part of a webpage (either as an image or as a CSS background element)
I am not able to make a 3D image of a text ...rending is blocked with the message " unable to make 3D because the text is in "faux vet ".
View 1 Replies View RelatedEvery time I create a new document, no matter what dimensions I put, it always makes it a square. Just tonight it has. I've been using the program for almost a year now and haven't had this issue at all.
I don't think I messed with any settings or anything. I read somewhere that it might have to do with the Pixel Aspect Ratio or something, but I've been trying different things with that and it hasn't worked. I'm on Mac OS X 10.8.2 Mountain Lion running Photoshop CS5.
I am trying to make a silhouette of the Ford Fair lane in the zip file attached below, and place it into the BANNER_ONE.psd document. This is for a contest (redesigning the banner), so I have attached the current banner as well (profile_header.jpg).
The requirements for the banner are as follows:
incorporate "the driver's seat of youtube" and "the most automotive variety" (DONE)incorporate featured in car and driver, perhaps with that October 2011 issue cover (DONE)incorporate something related to the make a wish foundation silhouette design possibly using the 65 fairlane.
So, what is the best way to trace a silhouette of the Fairlane, similar to the one in the original banner? I was thinking the Pen Tool, but seeing as how I'm on a laptop and don't have access to an external mouse until late tomorrow (I'm away for the weekend), that's not the best option at the moment.
i'm wanting to make some banners for my site, i just wondered how i would make a SIMPLE banner thew has moving text on it. Are there any guides out there?
View 1 Replies View RelatedI make banners for our company newsletter that we do every month and they vary from month to month in design. I am working a few months ahead and creating a banner for our March newsletter, which I'm doing a Saint Patrick's Day design.
To do this, I am using a JPG of a four leaf clover that I want to remove the white space behind it and then set it to different opacities to add to a plain, green banner.
I do these steps:
1. Open the file.
2. Create a new layer.
3. Drag the new layer under the original file.
4. Use the magic tool, set to appropriate tolerance and select all the white space. It does the moving dotted lines around all the space I want removed.
5. Press "Delete" to remove the white space.
I did the same procedure yesterday and it worked fine. Today, it won't delete the white space. Is it because this image is a JPG?
I wanted to make a mirror image from a jpg but I cannot figure it out with Photoshop 6 or 7. I have the book, "Photoshop 6 for dummies", and I cannot find any references to making a mirror image. I am trying to print the (reversed) image onto a heat transfer for a T-Shirt.
View 4 Replies View RelatedHow do I make an image look more cartoony using the filters, etc.?
View 3 Replies View RelatedI want to take an image (doesn't matter what) and lay a finely bordered grid over it.
Then I will be filling in certain spots of the grid with the background color, essentially making it look like a large digitized image.
Now imagine an image filled in that grid. If the web page background was green, then I'd take random squares and fill them in as green.
Should I be drawing the grid? Erasing the background of an existing image? I've experimented with different things but really haven't come close to the desired effect.
I use PS7.
I'm currently designing a T-shirt for an event. I've made a few shirts in the past and they required about a 600dpi image for best results. However, the image available to me is at 72dpi (comes off a website).
It is from the movie "Team America". I can get the 1024x768 image from the downloads section where the puppet is looking into the fiery background with "TEAM AMERICA" and all else on it. However I need that background ONLY, minus all the text and extras. If anything, just the puppet, but nothing else.
Actually, since the website is in flash, there is an intro where for a brief moment, that very image (when it is blank) appears and everything comes down on it. At that second, I did a Print Screen and captured it. I created a new image in PS at 600dpi and attempted to stretch it. I have a 17" monitor so if I try to view the image as a whole, its at 15% or so, so it still looks good. When I zoom in all the way to 100%, its very blurry. Is there a way to sharpen the image accurately where it won't be noticeable on a t-shirt?
I'm having some issues using either GIMP or PS to do this, so I figured I'd ask here. when it comes to image editing and tasks like this, but I'm currently being asked to do something for a job.
I need to take a single image which is a restaurant floor layout, then make it so all of the tables on the image are a different layer so that they can be moved around/customized accordingly.
As far as I can tell, this would involve creating layers, copying the tables from the main image, pasting them all on top as their own layer, and then sliding them around from there.
Is there any easy way to do this, or am I completely off-base?
I have a png image of van with white background. I need it to be transparent like image on here [URL] ... the computer. I have read and watched videos but can't get it to work. Using AI CS6.
View 2 Replies View RelatedHere is what I get when I try and view an image in Bridge. It has been working fine and then all of a sudden I can't view images.
View 2 Replies View RelatedI had CS5 installed over a year ago and running without any display problems until recently. About a week ago I noticed severe banding in the high light areas of my images when I opened them in PS. At first I thought there was something wrong with my camera, or just plain bad images, until I realised that the images display without any banding in Windows Photo Viewer or any other viewer! I'm running Windows XP SP3.
I have not made any hardware, software or other changes recently (except installing a Nik S/W plugin – which I subsequently uninstalled but that did not solve the problem). Also no changes in colour profiles etc. I also updated CS5 to the latest version; disable/enabled Open GL acceleration in the preferences without any effect on the problem.
when i open any image in Photoshop, its looks like washout but it looks fine in windows image viewer. Here is an example:
View 9 Replies View RelatedI recently purchased cs4 to update from CS3 and I have installed it without problem. But when I open my images they appear in different shapes and most of them are barely visible due to a crosshatch pattern on them. I can't figure out what is wrong with them its not my computer because i never had a problem with CS3.
View 2 Replies View Related