I recently purchased cs4 to update from CS3 and I have installed it without problem. But when I open my images they appear in different shapes and most of them are barely visible due to a crosshatch pattern on them. I can't figure out what is wrong with them its not my computer because i never had a problem with CS3.
View 2 Replies
there's a sharp transition after the smooth one (transition end and fill color doesn't match)... What is configured wrong? in the gradient settings, there's only one color, and gradient midpoints are also in the middle...
View 1 Replies View RelatedMy font settings is messed up in my Photoshop 7. If I put it on size 6pt it looks like it is size 12. And when I put it on size 12 it looks like it is size 24 pt. And it gets a jaggy! I tried reinstalling it but it's still there.
View 5 Replies View Relatedbought a digital camera
my question, why are the colors like this? i do not know of any settings i changed, i just pasted a picture into photoshop and the colors became all weird. how to make it "regular" again?
I'm having a little problem with Photoshop cs.
When I start a new image and paste from my clipboard the image shows up looking very red. I'm not sure what the problem is. I've messed around with the color presets and color modes but nothing seems to help.
I'm using the RGB color mode 16bit.
Something happened to my photoshop that messes up the fonts. They all look like caps when I type (no I don't have capslock on :P). Not the seize (they are normal seize) but the form of the letters. ie. all my a's look like A, not a and all my e's look like E, not e. Very different form and because of this my curly fonts etc. look very ugly and unclear now.
View 8 Replies View RelatedMy new installed copy of Photoshop CS6 has a few problems:
1. When you go to save as the file formats selections are not what you get. For instance jpeg gives you EPS. Multi Picture Format gives you jpeg. What gives?
2. One of the plugins that worked fine under filters is missing. When I copied the things from the old CS5 plugins folder to CS6 folder it still is not showing up..
My colors are completely off in photoshop from the real image. I've already checked to make sure it's not the monitor, the color is fine there. I've already read the forums that say to simply turn on "Proof Colors." That does changes the colors how they should be. HOWEVER, if I try and export the file out as a png or anything, they are exported with the messed up color rather than the "proof colors." BUT if I open the image up in microsoft paint, it appears to be right, but only with paint. If I open the image with anything else (reader, indesign, picaso, etc.), the color is always messed up. I even tried exporting the png to someone else thinking it was just my computer, no luck. For some reason, I can't export anything without it using crazy colors (just like if "proof colors" was unchecked). I've tried deleting preferance and playing around with the color settings. What can I do?
here's my spects:
Windows 8
2013 Asus Laptop
Photoshop CS6
I've somehow managed to completely mess up my color profiles in Photoshop CS5. What a total Gormlops I am.
1 - ACR displays colours from RAW files as lifeless and dull compared to JPEG. I've searched countless forums and I'm lead to understand that RAW files don't include the 'in-camera' processing that we see on the JPEGS. What I don't understand is that ACR used to display the colors on my RAW files exactly like it did with JPEG files so although I understand the difference in the way ACR handles RAW vs JPEG why has this only become noticeable in the last few months? I've had this installation of CS5 for almost 2 years and the problem crept in only recently.
2 - Proof Colors Confusion
I mostly work on the web and rarely need to print. Round about the same time the above problem reared it's ugly head I also started having issues with how many graphics colours looked in CS5. I realized that half of the time I was working with 'Proof Colours' switched off which made my colours really intense (something to do with gamma).
I checked my 'Proof Setup' and switched it to Internet sRGB seeing as I mostly work with web graphics and photos. I then hit Ctrl+Y to switch on Proof Colours and now I see the colours as they really are.
My question for this is twofold - Am I correct to be working in sRGB and is there ar way to have 'Proof Colours' always switched on so that I only EVER see the 'actual' colours that others will see when I publish my files to the web?
These two issues arose at the same time and are linked. I tried installing a demo of CS6 in the hopes it would set me back to where I used to be but alas nothing changed.
I accidentally had my files marked at 16 bits/channel, went ahead and saved them as jpegs. Got a software prompt prior to saving that said "File must be saved as a copy with this selection." I did not know what it meant. I went ahead with the save. Now I am realizing my mistake because I have tried printing my images at a lab and the colors are WAY off. Very gray and horrible. I have my master files saved as psd files as well and have opened those, changed the bits/channel to 8, tried to print and the colors are still awful. I have many files that were saved this way. There has to be some kind of a fix without me having to re-edit dozens and dozens of photos.
View 3 Replies View RelatedI just updated my Catalyst to 13.1 and now here is how some of my blues look like: [URL].... how to fix this besides rolling back the driver?
View 7 Replies View RelatedMy open dialog box is messed up, as the Enable: is always set to nothing! I do have an althernate plug-in dir set in preferences (I do not want to reinstall all my 3rd party plugs from CS 5.1!) So what to do? If I remove the old plug dir from preferences, I loose my plugs but get Enable to work right!
View 4 Replies View RelatedIf I use 2 monitors to display 1 image with the image extending from one monitor into and across the second monitor, can I make a screen shot of the entire image without any break in the middle where it crosses from one monitor to the other? Will it be one continuous screenshot of the entire image, even though the image is displayed on 2 monitors?
View 6 Replies View RelatedI have cropped some pics during the editing process and when I go to print them out the pixels are really messed up. I am using a Nikon D3100. Maybe I am saving them wrong or something. I am saving them as JPEG.
View 4 Replies View RelatedI'm running Lightroom 4.1, but this issue has been present since Lightroom 3.0 using two different, modern ATI Graphics cards, same Sandy Bridge PC.
On any image, shot with any camera, after a few minutes the info display (image information) and the surrounding area will corrupt. It looks like there's a rectangular box about the width of the image and the height of the info display, where the border of the rectangle is made up of bits of the image, hope that makes sense.
Anyway, pressing "I" to cycle through the info display removes the corruption, but then it returns a few minutes later.
I have a weird texture issue in Softimage.When viewing my model in softimage, everything looks fine. However, when I export to FBX and re-import, half the model texture looks messed up; while the UVs look fine in the viewport:
image1
When I look closely, I notice that the UVs have somehow been rotated in such a way that they look fine, but the edges are all rotated wrongly (the seams don't match up anymore and I can't island select areas)
image2
Exporting to .obj doesn't seem to give this issue, but this is not a good solution as I may need to animate the robot in the very near future...
Sometimes (Alot of times) ill go to put a brush down and it comes up all smudged and messed up looking, other times it works. Here's a pic of the error.
View 1 Replies View RelatedI cannot seem to get this image to display!
I originally put it through Photoshop, it didnt work. Now its been through every program I can think of and i resaved it.
Still no go!
It DOES work if it is loaded into a browser as the sole content, but not if part of a webpage (either as an image or as a CSS background element)
I had been using VSX2 on my old computer (XP Home OS) and saving my projects as .flv files for uploading to Youtube with no issues. Last spring I put together a new computer which I thought would be much better and faster at rendering the files. The new computer uses Windows 7 64 bit and I applied the VSX2 patch for Windows 7. When I save a project as a .flv file on the new computer the audio in the resulting file is totally messed up, just hisses, pops and crackles. The video looks fine. Saving projects in other video formats seems to work okay.
I recently got back into wanting to post video to Youtube and have been trying to figure out what is causing the audio problem. I purchased the upgrade to VSX3, assuming that would fix it but the results are still the same. I do have other software that will not run on Windows 7 so I have set my computer up to dual boot with XP Pro. As an experiment, after I upgraded the Windows 7 OS to VSX3 I installed the redundant copy of VSX2 on the XP Pro OS. I then used the same original files from the camcorder to re-create as nearly as I could the same project as I had been trying to make with the W7 VSX3 on the XP VSX2 version. The file produced in XP works perfectly with no audio issues.
As a side note, the file size of the same project produced in W7 VSX3 is almost double the file size produced in XP VSX2. I am "Create Video File" as FLV (640x480). I see from another thread that I may be better to be saving as FLV(320x240) although that doesn't make sense to me. I am not very knowledgeable about the different formats and their uses. I did produce one series as mp4 files but the video quality seemed to be poorer than the way I had been doing it.
I think I started noticing this problem in 2013, but not sure. It's definitely happening in 2014 still.Basically I import an obj file. It looks fine, but there are a few parts grouped together. I grab them by selecting element, and detach. Boom! Now the normals are all messed up on the detached object.
and the same thing happens often when attaching other objects. Sometimes the normals just get flipped completely around even.
I deleted a lot of old photos from my external hard drive, which seems to have messed up my link of some photos to LR. When I got on yesterday, one huge wedding collection showed the "offline or missing ?" thing but still showed the actual photo. In trying to re-link the photos to LR, I think I did two things that royally messed me up. I opened up an older catalog, which had the large wedding collection, but it now turned up the photos as totally blank. The collection still shows 2000+ photos in it, and each photo shows the little symbols that show which have been edited, and they still show the ? in the top corner, but no photo.how to reconnect the photos without messing more photos up?
View 6 Replies View RelatedI have about 150 photos loaded into my drawing and scaled in order to perform measurements on them. I'd like to have file names of the images displayed next to the images. Is there a way to automatically display file names for all the images, so I don't have to do it by hand?
These are photos of microfossils and the all look pretty similar, so telling them apart visually is often a problem.
Here is what I get when I try and view an image in Bridge. It has been working fine and then all of a sudden I can't view images.
View 2 Replies View RelatedI had CS5 installed over a year ago and running without any display problems until recently. About a week ago I noticed severe banding in the high light areas of my images when I opened them in PS. At first I thought there was something wrong with my camera, or just plain bad images, until I realised that the images display without any banding in Windows Photo Viewer or any other viewer! I'm running Windows XP SP3.
I have not made any hardware, software or other changes recently (except installing a Nik S/W plugin – which I subsequently uninstalled but that did not solve the problem). Also no changes in colour profiles etc. I also updated CS5 to the latest version; disable/enabled Open GL acceleration in the preferences without any effect on the problem.
when i open any image in Photoshop, its looks like washout but it looks fine in windows image viewer. Here is an example:
View 9 Replies View RelatedI've recently installed Photoshop CS5 extended on my new comp It was working fine, but when following a tutorial to make rust or metal it starts having issues.
As you can see below the noise in the left hand picture worksfine, but in the right when applying motion blue I get a fuzzy line down the middle, and occasional a sort of beveled effect around the image.If I drop the motion blur to a low count it's ok, it's when I start upping the amount.
When I first loaded up photoshop it did say it had an issue with my monitor settup which I have recently sorted but the problem still remains.
My computer specs are below.
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.111118-2330)
System Manufacturer: Hewlett-Packard
BIOS: Ver: CHG_712.rom vCHG7.12
Processor: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (8 CPUs), ~3.4GHz
[code][....
on my Windows 7 Ultimate x64 machine, I just calibrated my Dell SP2309W monitor using an i1DisplayPro and basICColor 5, creating a ICC v2 profile (I am aware of the problems under Windows with ICC v4 profiles).
It created the ICC profile and applied it to be used by Windows. I double checked under COLOR MANAGEMENT that the new ICC profile is being used. Although I can see that the new ICC is being used (desktop appearance changes), there are a few issues I am experiencing:
(1.) Windows Photo Viewer
The thumbnails in Windpows Explorer look fine (they DO use the new ICC profile), when I double click a jpeg and open the image it DOES NOT use the new ICC profile. When I click the PLAY SLIDESHOW button (starting the slideshow) in the opened image in Windows Photo Viewer, the images DO use the new ICC profile.
(2.) Internet Browsers
All current internet browser (Firefox, IE, Safari and Chrome) DO use the new ICC profile and display the image correctly.
(3.) Photoshop CS 5
When I open the same image - that Windows Photo Viewer does not correctly displays (according to the new ICC profile) - in Photoshop CS5, I get the same image display that Windows Photo Viewer gives me (when not thumbnail or not in slideshow mode) - it appears to be the sRGB display.
My color settings in PS CS5 are: North America General Purpose 2 > sRGB IEC 61966-2.1.When I go to View > Proof Setup > Monitor RGB I get the image display using the new ICC profile.Why does the image look different in PS than my calibrated monitor should output ?
I was under the impression that the sole purpose for calibrating my monitor was to get a uniform display across (ICC aware) applications. Even when one applies different color spaces to a document in PS, I thought the output on my calibrated screen done by the graphic card should always be according to my calibration and the settings in the ICC profile being used.
what I do is design one half of my design first. When I like what I have I duplicate that part of the design and then mirror it horizontally. I then save the file. Close out of the program. Turn it back on the next day, and some of my gradients are now messed up on the side that was mirrored.
As you can see the left snippet is how it should look, the right mirrored snippet's gradients should match but the don't. Some of the gradient. (not all of them though). It's really bizarre. It doesn't happen often, the only times I can remember it happening is when working on really large complex designs. Oh also, it is effecting gradient fills and transparency linear gradients.
Photoshop CS6 shut down after using for 5mins; no image can display on canvas.
View 5 Replies View RelatedMy Photoshop Elements browser won't display my Photoshop image files. If I click on browse the files all relate to general computer files. How do I get it back?
View 6 Replies View RelatedThere is a hack of the registry at URL....Does it still apply to PSE 11?Might it also apply to PSE 12? What is the effective limit on the size of an image? I have, for example, a panorama of more than 300 MB.
Win 7 Pro 32 (4 GB RAM) and a second machine WIN 7 Pro 64 (8 GB RAM)
