Something happened to my photoshop that messes up the fonts. They all look like caps when I type (no I don't have capslock on :P). Not the seize (they are normal seize) but the form of the letters. ie. all my a's look like A, not a and all my e's look like E, not e. Very different form and because of this my curly fonts etc. look very ugly and unclear now.
View 8 Repliesthere's a sharp transition after the smooth one (transition end and fill color doesn't match)... What is configured wrong? in the gradient settings, there's only one color, and gradient midpoints are also in the middle...
View 1 Replies View RelatedMy font settings is messed up in my Photoshop 7. If I put it on size 6pt it looks like it is size 12. And when I put it on size 12 it looks like it is size 24 pt. And it gets a jaggy! I tried reinstalling it but it's still there.
View 5 Replies View Relatedbought a digital camera
my question, why are the colors like this? i do not know of any settings i changed, i just pasted a picture into photoshop and the colors became all weird. how to make it "regular" again?
I'm having a little problem with Photoshop cs.
When I start a new image and paste from my clipboard the image shows up looking very red. I'm not sure what the problem is. I've messed around with the color presets and color modes but nothing seems to help.
I'm using the RGB color mode 16bit.
My new installed copy of Photoshop CS6 has a few problems:
1. When you go to save as the file formats selections are not what you get. For instance jpeg gives you EPS. Multi Picture Format gives you jpeg. What gives?
2. One of the plugins that worked fine under filters is missing. When I copied the things from the old CS5 plugins folder to CS6 folder it still is not showing up..
My colors are completely off in photoshop from the real image. I've already checked to make sure it's not the monitor, the color is fine there. I've already read the forums that say to simply turn on "Proof Colors." That does changes the colors how they should be. HOWEVER, if I try and export the file out as a png or anything, they are exported with the messed up color rather than the "proof colors." BUT if I open the image up in microsoft paint, it appears to be right, but only with paint. If I open the image with anything else (reader, indesign, picaso, etc.), the color is always messed up. I even tried exporting the png to someone else thinking it was just my computer, no luck. For some reason, I can't export anything without it using crazy colors (just like if "proof colors" was unchecked). I've tried deleting preferance and playing around with the color settings. What can I do?
here's my spects:
Windows 8
2013 Asus Laptop
Photoshop CS6
I've somehow managed to completely mess up my color profiles in Photoshop CS5. What a total Gormlops I am.
1 - ACR displays colours from RAW files as lifeless and dull compared to JPEG. I've searched countless forums and I'm lead to understand that RAW files don't include the 'in-camera' processing that we see on the JPEGS. What I don't understand is that ACR used to display the colors on my RAW files exactly like it did with JPEG files so although I understand the difference in the way ACR handles RAW vs JPEG why has this only become noticeable in the last few months? I've had this installation of CS5 for almost 2 years and the problem crept in only recently.
2 - Proof Colors Confusion
I mostly work on the web and rarely need to print. Round about the same time the above problem reared it's ugly head I also started having issues with how many graphics colours looked in CS5. I realized that half of the time I was working with 'Proof Colours' switched off which made my colours really intense (something to do with gamma).
I checked my 'Proof Setup' and switched it to Internet sRGB seeing as I mostly work with web graphics and photos. I then hit Ctrl+Y to switch on Proof Colours and now I see the colours as they really are.
My question for this is twofold - Am I correct to be working in sRGB and is there ar way to have 'Proof Colours' always switched on so that I only EVER see the 'actual' colours that others will see when I publish my files to the web?
These two issues arose at the same time and are linked. I tried installing a demo of CS6 in the hopes it would set me back to where I used to be but alas nothing changed.
I recently purchased cs4 to update from CS3 and I have installed it without problem. But when I open my images they appear in different shapes and most of them are barely visible due to a crosshatch pattern on them. I can't figure out what is wrong with them its not my computer because i never had a problem with CS3.
View 2 Replies View RelatedI accidentally had my files marked at 16 bits/channel, went ahead and saved them as jpegs. Got a software prompt prior to saving that said "File must be saved as a copy with this selection." I did not know what it meant. I went ahead with the save. Now I am realizing my mistake because I have tried printing my images at a lab and the colors are WAY off. Very gray and horrible. I have my master files saved as psd files as well and have opened those, changed the bits/channel to 8, tried to print and the colors are still awful. I have many files that were saved this way. There has to be some kind of a fix without me having to re-edit dozens and dozens of photos.
View 3 Replies View RelatedI just updated my Catalyst to 13.1 and now here is how some of my blues look like: [URL].... how to fix this besides rolling back the driver?
View 7 Replies View RelatedMy open dialog box is messed up, as the Enable: is always set to nothing! I do have an althernate plug-in dir set in preferences (I do not want to reinstall all my 3rd party plugs from CS 5.1!) So what to do? If I remove the old plug dir from preferences, I loose my plugs but get Enable to work right!
View 4 Replies View RelatedI have cropped some pics during the editing process and when I go to print them out the pixels are really messed up. I am using a Nikon D3100. Maybe I am saving them wrong or something. I am saving them as JPEG.
View 4 Replies View RelatedI have a weird texture issue in Softimage.When viewing my model in softimage, everything looks fine. However, when I export to FBX and re-import, half the model texture looks messed up; while the UVs look fine in the viewport:
image1
When I look closely, I notice that the UVs have somehow been rotated in such a way that they look fine, but the edges are all rotated wrongly (the seams don't match up anymore and I can't island select areas)
image2
Exporting to .obj doesn't seem to give this issue, but this is not a good solution as I may need to animate the robot in the very near future...
Sometimes (Alot of times) ill go to put a brush down and it comes up all smudged and messed up looking, other times it works. Here's a pic of the error.
View 1 Replies View RelatedI had been using VSX2 on my old computer (XP Home OS) and saving my projects as .flv files for uploading to Youtube with no issues. Last spring I put together a new computer which I thought would be much better and faster at rendering the files. The new computer uses Windows 7 64 bit and I applied the VSX2 patch for Windows 7. When I save a project as a .flv file on the new computer the audio in the resulting file is totally messed up, just hisses, pops and crackles. The video looks fine. Saving projects in other video formats seems to work okay.
I recently got back into wanting to post video to Youtube and have been trying to figure out what is causing the audio problem. I purchased the upgrade to VSX3, assuming that would fix it but the results are still the same. I do have other software that will not run on Windows 7 so I have set my computer up to dual boot with XP Pro. As an experiment, after I upgraded the Windows 7 OS to VSX3 I installed the redundant copy of VSX2 on the XP Pro OS. I then used the same original files from the camcorder to re-create as nearly as I could the same project as I had been trying to make with the W7 VSX3 on the XP VSX2 version. The file produced in XP works perfectly with no audio issues.
As a side note, the file size of the same project produced in W7 VSX3 is almost double the file size produced in XP VSX2. I am "Create Video File" as FLV (640x480). I see from another thread that I may be better to be saving as FLV(320x240) although that doesn't make sense to me. I am not very knowledgeable about the different formats and their uses. I did produce one series as mp4 files but the video quality seemed to be poorer than the way I had been doing it.
I think I started noticing this problem in 2013, but not sure. It's definitely happening in 2014 still.Basically I import an obj file. It looks fine, but there are a few parts grouped together. I grab them by selecting element, and detach. Boom! Now the normals are all messed up on the detached object.
and the same thing happens often when attaching other objects. Sometimes the normals just get flipped completely around even.
I deleted a lot of old photos from my external hard drive, which seems to have messed up my link of some photos to LR. When I got on yesterday, one huge wedding collection showed the "offline or missing ?" thing but still showed the actual photo. In trying to re-link the photos to LR, I think I did two things that royally messed me up. I opened up an older catalog, which had the large wedding collection, but it now turned up the photos as totally blank. The collection still shows 2000+ photos in it, and each photo shows the little symbols that show which have been edited, and they still show the ? in the top corner, but no photo.how to reconnect the photos without messing more photos up?
View 6 Replies View RelatedI want to see "resent" fonts when choosing, be able to type letter to get down the list quickly, group similar fonts, etc. Maybe have a magnifying glass attached to cursor to see fonts better.... Why have this not been done?
View 1 Replies View RelatedOnce I installed windows 7, while I WAS using PSE 9, I had the tiny font problem. I stopped using PSE for 2 years. I just installed PSE 11. Though better, the Font is still way smaller than I would like. Maybe it's just tougher for seniors? Can they not make the font adjustable? I was told there is no way to increase the size of the font?
View 4 Replies View Relatedwhat I do is design one half of my design first. When I like what I have I duplicate that part of the design and then mirror it horizontally. I then save the file. Close out of the program. Turn it back on the next day, and some of my gradients are now messed up on the side that was mirrored.
As you can see the left snippet is how it should look, the right mirrored snippet's gradients should match but the don't. Some of the gradient. (not all of them though). It's really bizarre. It doesn't happen often, the only times I can remember it happening is when working on really large complex designs. Oh also, it is effecting gradient fills and transparency linear gradients.
It used to be that I very rarely used fonts within CS5 but recently I have. I realized that all of the fonts supposedly included with CS5 are not available via my drop down menu.
I then found these fonts in Windows/fonts so I copied all of those fonts into Program Files/Common Files/Adobe/Fonts. These unavailble fonts are now listed in that folder but are still not available via the dropdown menu in PS CS5.
I've recently read that the fonts don't really even NEED to be in the Program Files/Common Files/Adobe/Fonts folder and that PS should actually make all of the fonts in Windows/Fonts available via the dropdown menu. Yes, I have restarted PS after copying the files and also tried rebooting my PC after copying the files. The fonts are still not available via the drop down text menu within PS even though all of them are now in both locations.
I have put some new fonts into C:/windows/fonts and they have come up in other programs e.g. Microsoft office but they are not showing up in photoshop.
i am using vista home premium with SP1 and it is 32bit and photoshop cs4.
fonts withs parts of letter missing in a few fonts when sent to cut/plot
View 10 Replies View Relatednever knew there has a font folder in the user profile for Gimp until I wiped my user profile and moved all patterns, gradients, brushes, etc I have been putting in the program folder to the user profile folder because I read on here that it is better to keep all that stuff in the user profile folder of Gimp... my question is, what is the difference between installing your fonts into the system and placing them into the fonts folder in Gimp (besides all programs being able to use them)?? I've been installing all my fonts into the system I wanna use in Gimp... is it better to use the font folder in the Gimp user profile or to install them into the system?
View 1 Replies View Relatedwill not allow me to attach screen shot from grab. Image not allowed is error message
View 3 Replies View Relatedhow to get Gimp to only showfonts from the user/fonts file rather than the vast amount of system fonts.
I think you should read the original mail again. Hint: "system fonts not shown" is not the problem, but the desired outcome.I have accidentally read a "not" into the original mail, thus it became "to get Gimp to *not* only show fonts from the user/fonts file"
The configuration to check is the fonconfig settings then, for example the the global, system-wide fonts.conf file. It may contain references to the global font directories, for example /usr/share/fonts/usr/X11R6/lib/X11/fonts. URL....
If you comment those out, then you can (and have to) add all font directories in GIMP's settings, for example.
How do I include 'Edge Web Fonts' (not Google Web Fonts) into Edge Animate?
View 18 Replies View RelatedFrom the attached image you can see what I'm talking about.
(left=original, middle=ROTATE, right=PROPERTIES)
When I rotate blocks using ROTATE command everything is fine, but when I rotate blocks using PROPERTIES my attributes get messed.
I need to rotate several blocks at once with PROPERTIES, because I don't have time to rotate each one separately.
The same thing happens when scaling blocks, but this was resolved using the command BSCALE in the command line.
Why don't I have the same fonts in cs6 as I did in cs5 and how do I get them back?
View 3 Replies View RelatedIf I'm creating a Photoshop PDF in order to keep the type in vector format, will the font then be embedded in the PDF? I'm not rasterizing the type since I want it to stay vector, but then I'm worried that if I share the file someone else will have trouble with it. I made a Photoshop PDF yesterday that I needed to share -- I just sent the font along with it. I knew it would probably ask for the font if they attempted to edit it in Photoshop -- but if they just printed it from the PDF maybe it would be embedded? Acrobat is listing it as an embedded subset, but I don't see how it can be embedded if the editing capabilities are still there.
View 1 Replies View Related