I got a new plotter. IT set it up, but they know nothing about autocad. I plot on the new plotter fine. When I print to my small printer I set the different size and pen weights and all. OK, that works. The problem is when I go back into the original plotter drawing, I have to reset all my settings. Even from plot to plot in the same drawing. It doesn't seem to hold the settings from one device to the other. When I try and save the PC2 or Partial PCP file under Configuration File in the plot tool, I don't know where to save it to. Wouldn't that save the settings? Using R14, an old version. Plotter is HP T790.
I have just recently installed AutoCAD LT 2014 on Windows 7 (Running on an intel iMac through Bootcamp). Ever since then i am receiving notifications when performing a save.
AutoCAD is telling me it cannot perform the save and is creating a .tmp file in the same location on the server as the file should be.
this is causing major performance issues and happens almost every second time I attempt to perform a save. The issue is that we are getting multiple versions of the same file duplicating on the file server which is very quickly going to cause capacity issues considering most files are 2-4mb in size.
While "Draw" of Coreldraw X5 is working well, Corel Photopaint X5 does not "Save", "Save as..." or "Export" files. It just does nothing, when I choose to save a file under "something.cpt". It works, as long as it is a JPG, but not as a CPT. I am working on a Win7, with CorelX5 in german. Support told me to reinstall.
Why my photoshop CS6 64 bit in windows 8 can't SAVE and SAVE AS any files?
it's ok for my Photoshop cs6 32bit,but there is not reaction when i use command file->save or file->save as ,also CTRL +S and SHIF +CTRL+S in Photoshop 64 bit
I'm running Photoshop CC 14.1.2 on Mac (OSX 10.8.5) and whenever I use "Save As…" Photoshop marks the original file as edited and asks me to save it again before I close it - even if I have not made any changes before or after using "Save as…". This behavior is breaking some of my actions and bothering me quite a bit.
I am using Autodesk Inventor 2013 for the first time. I've installed it but I have no template files when I want to start a new file. I think I may have set up th wrong file locations, "C:UsersPublic1DocumentsAutodeskInventor2013TemplatesStandards.idw was not found" it the message I keep getting.
Where and how should I setup my files, projects and meanings behind what they mean. I am completely lost I think it may be a good idea to start fresh.
I have tried to export a DXF model to SAT via the Export option in the File menu. However, I do not see any SAT file generated and there is no message that the export attempt was unsuccessful. How to approach this problem?
I have only just started using AutoCad and all of a sudden my program will not open and save files anymore without, without me typing in the whole filename string. Is there a way of resetting this as it has never done this before?
I am using 50 AutoCAD Network License and all data is on server not on local PC. When i try to save drawing it say's unable to save. Only save as is working that also i have to give different name for the file to save.
All other software's (Like Word, Excel etc.) are fine with saving data files on the same server's. Is there any Autocad variable to be changed.
i am using autocad 2013 student version at home and at college i am using autocad 2012. so when i create drawing in 2013,dosent open on 2012"it says incompatible version". i like to save all my dwg files automatically in 2011 format, i dont want to click save as and change it 2011 format.what i need is whenever i finsh working on drawing, if click save it should automatically save in 2011 format.
Can you save files for 2012 in 2013? I have the ability to upgrade to 2013 while others at my company are not able to, since they were not put on the subscription service. If I upgrade will they still be able to open my files or can I back save to a previous version? I know I can save it as different file type, like .iges or .step, then use feature recognition. But I need them to have full editability to sketches and features.
We are using inventor 2014 LT in our work place and just recieved it. We are a production company that often makes many variations of a single part baised on the indivual job. I was wondering if there was a way to save one part file with multiple configurations so when you pull it into assembly file you select the configuration you want and then place it on the assembly.
Is it not possible to save the published files location to the DSD file?
I am trying to setup different published sets to different folders (multi-sheet and single-sheet) but have no success on changing the default file location in Publish Options.
AutoCAD LT 2012...I have set up automatic file saving to save files every 10 minutes but files are not saved. I have deleted most old files from the "temp" folder thinking it may be full but the save function is still not working. Sometimes drawings do get saved but only at random intervals and definitely not every 10 minutes.
I have created master assembly that has rules to 'save as' the assembly and parts to different locations and with different names. This master assy has links to excel file to get different names
In the same way I am looking the drawings (for both assy and parts) needs to be created and 'save as' to different locations. These newly generated drawings should have links to newly created parts/assembly.
I am able to 'save as' the master drawings to different locations but these newly created drawings still has links to master assembly/parts.
We are trying to secure our drawings using regular NTFS folder/files permissions on a Windows 2003 server. The goal is to let users save changes to dwg files but NOT delete files or move them. We are trying to prevent accidental deletion of files.
We have created a group which is assigned all rights on files except "Delete". Unfortunately, this does not work because upon saving a file, ACAD deletes the original file of a network drive and recreates it with new/updated one. AutoCAD requires the "Delete" trigger.
Is there a method or a work around we could use to aid us on the task? All other programs like Creative suite, Office applications, various graphic programs work wonderfully with the permissions in place but not AutoCAD Architecture 2008. From what i've read this issue dates back to the dates of AutoCAD 14.
Our files are very valuable and there are LOTs of them. We can't be the only firm that values their files and not have dealt with this issue.
Is there a way to set up batch plot so it saves the files on it's own? Right now I have to wait for the box with the name to pop up and then I hit OK and then have to wait for each file like that?
I found a setting and changed it from "Prompt for name" and changed it to "Specify Name" but that did not do the trick.
I have a newly downloaded version of AutoCAD LT 2013 that will not save files in older formats for autocad 2004 and 2007. When trying to save the user gets the following error message "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I did some searching in the discussion groups and it appears that this is a known/common issue with autcad lt 2013. Is there a work around to saving it in a format that older autocad applications can view?
I have my automatic save turned on and set to 10 mins. I can visual see Civil automatically saving (as I have to wait a few seconds for the process) but it is not creating the temporary files.
I used to work fine, and I can see the last file that was created - a couple of weeks ago, but now it has just decided to stop creating these temporary files.It really makes this option useless if there is no temp file to get my lost information from when I crash.
So I have 25 years 3d CAD experience. Catia, Alias, Ford PDGS.I have spent 20 hours on Inventor 2013. Great program. Very intuitive. Have been banging out models easily.
My issue however is a Client has given me sone .stp's and Iges files to work with.They open fine as a .iam The issue is saving. I have the project folder setup, go to save.
I Get the "do you want to save changes to "XXXXXXXX.iam" and all its dependants.I select "yes to all".I get the "Yes" under the "Save" Column for all listed .ipt's...I hit OK.......Autodesk attempts to save.
...Then I get the dialogue box up with ! icons "The system cannot find the path specified" - The database in C:Users.........xxxx.ipt could not be saved
I have some AutoCAD 2013 users in our Fabrication department who are having problems saving R12 dxf files to a network location. When they try to save they get a message that states "Unable to save to drawing N:Bend|5130Xfilename.dxf. Drawing saved to N:Bend|5130Xsav6A0D.tmp" (See attachment for actual message)
The temp file does not get saved either. They can save R12 dxf files locally and to other network locations. They are able to save 2013 dwg and dxf files with no issues. This problem just affects R12 dxf files which they need for programming pressbrakes.
They can save to 2013 dxf files and then overwrite with R12. After that they cannot save again and get the message again.
User workstations vary.
All are Dell Precision workstations and laptops
Windows 7 x64 with 16 GB of RAM
All are running Nvidia Quadro graphics cards with certified drivers
I was able to use Inventor "Save Copy As" function to create zgl files. When the zgl files were viewed with "Imagination View" program, some files looked good, while some others do not show any geometry (just white background). Do I need to change anything in the Model before executing "Save Copy As" function?
I've just switched to autocad 2012, and when I'm opening dwg files it takes up to 2-3 minutes to open and save them. Autocad 2007 opens and saves the same files in mere seconds without problems.
Since we upgraded to Inventor 2012 SP1 on W7 x64 most machines cannot open or save out step or iges files. The translator shows as 'On demand' and when i save copy as the 'options' button is inactive. We just get the standard error 'Problems encountered while saving the document'.
I see lots of old posts but nothing relating specifically to stp files.
