AutoCAD Inventor :: Save As 3D Model To DWF Files
Aug 29, 2011I am not seeing the "Save as to DWF" in my Inventor 2011 save as list.
View 4 RepliesI am not seeing the "Save as to DWF" in my Inventor 2011 save as list.
View 4 RepliesSo I make a few modifications to a part and go to save it and it wants to save it as a DWG??? What is wrong with this? Why would you want to save a 3D Model as a DWG???
View 9 Replies View RelatedI currently have ilogic code that automatically saves a template Inventor dawing as a job drawing. However the problem I am having is when it does this save it takes forever as it seems to be also saving the linked model also. Is there a way to save this Inventor dwg without saving the linked model? The reason why I do not want this model save is because after the drawing is outputted the user is given options to write part numbers and dxf files if required which requires a model save anyway.
Sample of code used:-
ThisDoc.Document.SaveAsInventorDWG(ThisDoc.Path & "2D_DRAWINGS (Inventor dwg)" & iProperties.Value("Custom", "Drawing No.") & ".DWG", True)
I have a part (partA) and a drawing of it (drawingA).I want to save a copy of both (partB and drawingB) and make changes to partB and drawingB will update.
To do this do I save a copy of partA first to partB and then in drawingA replace part to partB and then save a copy of drawing to drawingB
I have an ilogic rule created to do a save as .dxf and .pdf from the .idw file. It will then open the .ipt file without any issues. The problem I am having is that I also want it to do a save as .stp of the model after it opens the model. I get the following error.
Error in rule: Save As DXF PDF and open, in document: Save As DXF PDF and open.iLogicVb
Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))
Do I need to add something to the code?
Here is the code I have written.
strFolder="C:Vault_WorkspaceSave As"&iProperties.Value("Project", "Part Number")
ThisDoc.Document.SaveAs(strFolder&"_Rev"&iProperties.Value("Project", "Revision Number")&(".dxf") , True)
ThisDoc.Document.SaveAs(strFolder&"_Rev"&iProperties.Value("Project", "Revision Number")&(".pdf") , True)
doc=ThisDoc.PathAndFileName(False)&".ipt"ThisDoc.Launch(doc)
strFolder="C:Vault_WorkspaceSave As"&iProperties.Value("Project", "Part Number")
ThisDoc.Document.SaveAs(strFolder&"_Rev"&iProperties.Value("Project", "Revision Number")&(".stp") , True)
MessageBox.Show("STEP Created", "File Save")
I am using Autodesk Inventor 2013 for the first time. I've installed it but I have no template files when I want to start a new file. I think I may have set up th wrong file locations, "C:UsersPublic1DocumentsAutodeskInventor2013TemplatesStandards.idw was not found" it the message I keep getting.
Where and how should I setup my files, projects and meanings behind what they mean. I am completely lost I think it may be a good idea to start fresh.
I need to convert some of my ipt files to stp (around 130 files). Is there any way to do it all at once?
View 1 Replies View RelatedIs it possible to run a VBA macro every time the "Save" button is pressed on "IPT" files?
View 9 Replies View RelatedCan you save files for 2012 in 2013? I have the ability to upgrade to 2013 while others at my company are not able to, since they were not put on the subscription service. If I upgrade will they still be able to open my files or can I back save to a previous version? I know I can save it as different file type, like .iges or .step, then use feature recognition. But I need them to have full editability to sketches and features.
View 9 Replies View RelatedWe are using inventor 2014 LT in our work place and just recieved it. We are a production company that often makes many variations of a single part baised on the indivual job. I was wondering if there was a way to save one part file with multiple configurations so when you pull it into assembly file you select the configuration you want and then place it on the assembly.
View 6 Replies View RelatedI have created master assembly that has rules to 'save as' the assembly and parts to different locations and with different names. This master assy has links to excel file to get different names
In the same way I am looking the drawings (for both assy and parts) needs to be created and 'save as' to different locations. These newly generated drawings should have links to newly created parts/assembly.
I am able to 'save as' the master drawings to different locations but these newly created drawings still has links to master assembly/parts.
So I have 25 years 3d CAD experience. Catia, Alias, Ford PDGS.I have spent 20 hours on Inventor 2013. Great program. Very intuitive. Have been banging out models easily.
My issue however is a Client has given me sone .stp's and Iges files to work with.They open fine as a .iam The issue is saving. I have the project folder setup, go to save.
I Get the "do you want to save changes to "XXXXXXXX.iam" and all its dependants.I select "yes to all".I get the "Yes" under the "Save" Column for all listed .ipt's...I hit OK.......Autodesk attempts to save.
...Then I get the dialogue box up with ! icons "The system cannot find the path specified" - The database in C:Users.........xxxx.ipt could not be saved
I was able to use Inventor "Save Copy As" function to create zgl files. When the zgl files were viewed with "Imagination View" program, some files looked good, while some others do not show any geometry (just white background). Do I need to change anything in the Model before executing "Save Copy As" function?
View 3 Replies View RelatedSince we upgraded to Inventor 2012 SP1 on W7 x64 most machines cannot open or save out step or iges files. The translator shows as 'On demand' and when i save copy as the 'options' button is inactive. We just get the standard error 'Problems encountered while saving the document'.
I see lots of old posts but nothing relating specifically to stp files.
Inventor 2010
Am trying to convert this pump into solid ?
View 6 Replies View RelatedMy problem today is that I made a Model of a Part of a ship using surfaces rather than solids because the engineer thought it would be easier to bring into ANSYS program for analysis but he is now having a problem with it and I am looking into converting my current model to solid. I can do it but the method I thought of using is quite long winded and we are working to a tight deadline.
1.open up the surface part
2.use "Offset/Thicken"
3.any clashes between parts make a sketch and cut away.
the problem is the amount of plates I have and the time it takes to sort them out.
I have a .dxf model and I need the file in .ipt format as a 3d model. (I got the file from a website)
View 3 Replies View RelatedWe received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
I am having a catastrophic error in Inventor 2013.
When I attempt to save a drawing I have completed, I cannot save!
Can't save, save as or any other variation of save.
This is my issue every time I click save.
I have just recently installed AutoCAD LT 2014 on Windows 7 (Running on an intel iMac through Bootcamp). Ever since then i am receiving notifications when performing a save.
AutoCAD is telling me it cannot perform the save and is creating a .tmp file in the same location on the server as the file should be.
this is causing major performance issues and happens almost every second time I attempt to perform a save. The issue is that we are getting multiple versions of the same file duplicating on the file server which is very quickly going to cause capacity issues considering most files are 2-4mb in size.
I need to animate a model in Cinema 4D and save this .max model to a format I can use - either .3ds or fbx or something else..
File for model, skin and rendered project are in this folder:
[URL]
How to save files with spaces insted of dashes in Save for Web dialog window in Illustrator CS6?
View 9 Replies View RelatedWhile "Draw" of Coreldraw X5 is working well, Corel Photopaint X5 does not "Save", "Save as..." or "Export" files. It just does nothing, when I choose to save a file under "something.cpt". It works, as long as it is a JPG, but not as a CPT. I am working on a Win7, with CorelX5 in german. Support told me to reinstall.
View 15 Replies View RelatedWhy my photoshop CS6 64 bit in windows 8 can't SAVE and SAVE AS any files?
it's ok for my Photoshop cs6 32bit,but there is not reaction when i use command file->save or file->save as ,also CTRL +S and SHIF +CTRL+S in Photoshop 64 bit
I'm running Photoshop CC 14.1.2 on Mac (OSX 10.8.5) and whenever I use "Save As…" Photoshop marks the original file as edited and asks me to save it again before I close it - even if I have not made any changes before or after using "Save as…". This behavior is breaking some of my actions and bothering me quite a bit.
View 3 Replies View RelatedI seem to be having trouble "save" or "save as" with jpg files.
View 12 Replies View RelatedI need to insert a image to a face to a model and save it as family. And use the created family in projects.
Note: The image should be associated with the family.
The files in my sheet set manager model view is not in alphabetical order? Any way to get it in aphabetical order?
View 2 Replies View Relatedworking with acad 2012 and not having good luck with links and functionality with excel. tried the links manager,pasting excel/entities. trying to insert separate files in model space in essence creating multiple cut lists for the drawing. Is there a tutorial that goes in depth with this? just froze one file at work, lucked out and opened at home. Each cut list is an individual worksheet, which may be the problem.
View 1 Replies View RelatedI got a new plotter. IT set it up, but they know nothing about autocad. I plot on the new plotter fine. When I print to my small printer I set the different size and pen weights and all. OK, that works. The problem is when I go back into the original plotter drawing, I have to reset all my settings. Even from plot to plot in the same drawing. It doesn't seem to hold the settings from one device to the other. When I try and save the PC2 or Partial PCP file under Configuration File in the plot tool, I don't know where to save it to. Wouldn't that save the settings? Using R14, an old version. Plotter is HP T790.
View 0 Replies View RelatedCPU / Computer Case fan - the spindle & blades only. For a better picture, it looks like this: [URL] ...
How do I design the blades?
How do I bend the blades?
How do I multiply the blades to make it repeat in circle?
P.S. The 3ds max discussion Area is locked, from what I've heard. I want to start creating GPU boards (which I already know how to do). BUT, I don't know how to design a Cooling Fan properly... which function in 3ds MAX... ???