Able to draw my lines but then unable to save dtext or mtext to them, only option is ESC or force quit. Using Autocad 2012 student license. got the 30 day trial for 2013, text not saving there either. Not using a layer. Deleting preferences did not work.
View 5 RepliesFrom the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies View RelatedAm using Autocad LT 2013 on Windows platform using Fusion Ware on a Mac Pro. This is a company owned computer and all files are saved to a server. This problem began occurring after we returned to work on Jan 2. I will be working in drawing and save regularly. Additionally autosave is set for 5 minute intervals.
Several times a day I get a message saying
"Unable to save drawing\serverfilename.dwg. Drawing saved to \serverfilenamesavF676.tmp."
When I check the folder where the drawing is supposed to be there is a "filename.dwl" and the "sav676.tmp." files but the original .dwg doesn't show up in the list.
If I save as the file to my desktop it is fine, but I then have to move it back to the server per company policy. This is extremely tedious to say the least. This happens several times a day so far.
The IT guy has twice reset the permissions for the Directory so the files are not Read Only (although when I check the main client folder and sub folders from my computer the Read Only option is checked and I cannot change this).
Another Autocad user in the office, LT 2013, says this has happened to him but only occasionally.
Also, several times I have noticed an alert pop-up that says something about "Unable to map network drive G:\" but clicking on the notice just expands the message. G Drive is the primary server in our office. The only PC computers in our office are used for Autocad, the rest are all Apple products and the IT tech is a Mac guy.
I have a .dwg file and when I try to save as 2010 DXF format, I get the following message:
"Unable to save to drawing c:projectslayout.dxf.
Drawing saved to c:projectssavF29D.tmp"
If I try to "save as" in DWG format with a different name in the same directory then it works. Also, there is no "savF29D.tmp" anywhere. I need the drawing DXF format.
I am currently using Acad 07 on Windows 7. I save my drawings to another pc on our network. Yesterday said pc was updated to windows 7 and now I am unable to save. I get an error message reading:- Unable to save drawing Location/file name.dwg, drawing saved to drawing/filename.tmp. What is a .tmp? I can save the files on my computer then move them over but it isn't ideal
View 3 Replies View RelatedHave an easy file open and am trying to save a copy with a new name and Inventor either does nothing or crashes. Original full path and file name contains 243 characters (counting from drive letter to extension) New one will have 247 characters.
This is supposedly within the path/file name character limits for windows 7, which according to the ms website is 260 minus one for the null character at the end making it 259. So I am over 10 characters shy of the limit dictated by the OS.
Is inventor placing a stricter limit on the number of characters in the full path/file name? If so, why?
Obviously, working up the tree and adjusting upper level folder names is not an option as that would break every link in every assembly at that level or lower.
I recently started having trouble when I try to save a file. It started about an hour ago. I have been working on this file all day with no problems. What is happening is when I do a quick save or a save as I get an error that says "unable to save to drawing F:NNorthview SchoolsHS - Phase 5, 6 & 7NH-EPSF1A13.dwg. Drawing saved to F:NNorthview SchoolHS - Phases 5,6 & 7savACD.tmp"
If I do a save as It will say the same thing but it will delete the existing file that I tried to save over. I have to do another save as to get the file back. I think this is specific to this drawing because I have not had it happen with any other file.
I ran Recover on the two exref files as well as the working file. No errors are found. I have purged all the files and tried again but it did not work.
For the past couple of weeks I have been getting a message that autocad cannot save dwg because it is being accessed by another session. This doesn't happen everytime I try to save, and it happens in differant files. After hitting save 4 or 5 times it will usually let me save the dwg. but then I have to go into the folder and clean out all the temp files. I know that none of the other users in my office have the dwg open when this happens so I'm at a loss as to whats causing it.
View 7 Replies View RelatedI am using Map 3D 2013 on a Windows 7 machine and am getting the following error when I try to do any save, q save or saveas: "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I was working in this file yesterday and received the same error at one point. I shut CAD down and did something for a few hours before I came back and everything operated normally for a little while. I was able to make edits and save. But then this morning the error is back. Even upon opening the file and immediately trying to qsave it will give me the error. I have run an audit, purged, tried to copy everything out and save to a new file. Nothing appears to be working.
We do run network licenses and I am pulling my drawings from a server, nothing is local to my machine.
I am not able to save any drawing file in civil 3d 2013 it comes fatal error massage . I am using windows enterprise 32 bits.
View 9 Replies View RelatedI am using 50 AutoCAD Network License and all data is on server not on local PC. When i try to save drawing it say's unable to save. Only save as is working that also i have to give different name for the file to save.
All other software's (Like Word, Excel etc.) are fine with saving data files on the same server's. Is there any Autocad variable to be changed.
Using CS 2 on Win XP
Simple question:
am trying to edit a text layer but i am unable to open the text box to change text.
It creates a new text layer everytime i click on the layer.
Running CAD Arcitecture 2010 and I am not able to use the "save-as" function to save as a dwg file. Using the the same down-load disk I have not had any problem with "save-as" on my laptop.
View 3 Replies View RelatedRandomly, a few times a week, I get an error in AutoCAD LT 2012 when trying to save a dwg file. It says
"Unable to save to drawing {filename} as it is being accessed by another session. Drawing saved to {filename}.tmp." The file then turns into Read Only and says
"Drawing file is write protected."
We have to do a Save As to a different filename in order to regain functionality.
(Inventor 2012) I have a weldment. I can make holes and save, I can make revolved cuts and save. I can make chamfers and/or fillets and save. But if I try to extrude a cut (any cut), I receive an error.
Problems encountered while saving the document.
Error(s) detected while writing segment AmBREPSegment in database C:lah-blah.iam
Error detected while saving object of type MIxTransactablePartition in C:lah-blah.iam
Error detected while saving object of type MIxPartition in C:lah-blah.iam
The attempted write operation did not succeed. Part file may be corrupt.The database in C:lah-blah.iam could not be saved...
It only happens with this one file so far. It is a STEP file. I open it in Inventor and then when I hit save it gives me an error. The system cannot find the path specified.
The database in C:Users
stalkerDocumentsInventorDesktopAssetCreation2Imported ComponentsC731222M-U2 68514423656.ipt could not be saved.The system cannot find the path specified.The database in C:Users stalkerDocumentsInventorDesktopAssetCreation2Imported ComponentsC731222M-U2 11505_3.ipt could not be saved.The system cannot find the path specified.
I have tried to save it on two different computers with two different projects and I get the same error. I have never ran into this problem before and I open and save STEP files often.
I have just installed AutoCAD 2006 on a new PC, and for a while everything seemed fine. However when I save a drawing it comes up with the following:
Unable to save to drawing (path and filename).
Drawing saved to (path)savAE01.tmp
It allows me to saveas without a problem.
If I come out of AutoCAD and try to open the file I attempted to save, it is visible in the file list, but a message pops up saying:
Cannot find the specified drawing file. Please verify that the file exists.
I can rename the .tmp file to a .dwg file and it opens, but then if I try to qsave it, the same thing happens.
Several times, with different files, I get a message when I try to save a drawing using ctrl-S (or when clsoing an un-saved dwg);
Unable to save to drawing B: (file location folder)file name.
Drawing saved to B: (same file location folder)savD214.tmp
The only option is to click OK
Now there are several .tmp files in my job folder. I haven't tried to open them or anything else.
The original file will be lost if I close the drawing. I've had this happen when I clsoe the drawing before saving it - I'll get a message asking if I want to save the draiwng before closing it, and then I'll get this message, click OK, and the file will be gone. I have to to the .bak file, make a copy of it and change the file extension name to .dwg to get the file back.
If I get this message when I'm just doing a ctrl-S save, I immediately do a "save-as", copy over the original file name, and everything seems to be fine.
I am using AutoCAD 2012 and I have an Issue that comes up once in a while. I will save the drawing that I am working in and a dialog box pops up with "AutoCAD Message. It says that it is unable to save to drawing, then lists the string where the drawing is found. Instead of saving as a .dwg, it creates a .tmp of the drawing. If I click the okay in the box it disappears and I can then resave the drawing as a .dwg. Lately it will even go so far as to lock the drawing and allow it to be only opened as a read only file.
View 1 Replies View RelatedI am unable to save any changes to my style & standards for Inventor lt suite 2014.
Is this meant to be as indicated by the wikihelp (Save styles to the library in the Style Library Manager), or have i got something installed wrong.
I have a newly downloaded version of AutoCAD LT 2013 that will not save files in older formats for autocad 2004 and 2007. When trying to save the user gets the following error message "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I did some searching in the discussion groups and it appears that this is a known/common issue with autcad lt 2013. Is there a work around to saving it in a format that older autocad applications can view?
I have a file where I can't save, because it says its being accessed by another session. The problem is no one has it open. I did a save as and tried changing the name of the original file or move the file with no luck. I need to keep the file name for purpose of company file structure.
View 9 Replies View RelatedI have changed my template using the styles library. For some reason Inventor 2013 will not let me save my new settings as a default in my newly created template. Instead it gives me an error message that reads:
" The following style definitions in template ....... differ from the definitions in the style library; the style library will be used.
Part listart list (ANSI), Revision Table: Revision Table (ANSI)
If the style definitions in the style library are intended for the new document, update the template with the new style definitions. If the style definition in the template are intended for the new document, remove these styles from your style library using the Style Library Manager."
I am running ACA 2011 x64. Recently I have been unable to save a view drawing in the project manager. When I press the save button it a window pops up telling me it cannot save the drawing in my project folder and saves it as a .tmp file.
View 5 Replies View RelatedI have some AutoCAD 2013 users in our Fabrication department who are having problems saving R12 dxf files to a network location. When they try to save they get a message that states "Unable to save to drawing N:Bend|5130Xfilename.dxf. Drawing saved to N:Bend|5130Xsav6A0D.tmp" (See attachment for actual message)
The temp file does not get saved either. They can save R12 dxf files locally and to other network locations. They are able to save 2013 dwg and dxf files with no issues. This problem just affects R12 dxf files which they need for programming pressbrakes.
They can save to 2013 dxf files and then overwrite with R12. After that they cannot save again and get the message again.
User workstations vary.
All are Dell Precision workstations and laptops
Windows 7 x64 with 16 GB of RAM
All are running Nvidia Quadro graphics cards with certified drivers
I have the same problem reported here : [URL]
Fresh installation of Windows Small Business 2011 standard
Disabled offline and cache on shared directories
Removed the router (server and computers in "standalone", just joined by a gigabit switch 5 ports, 2m of cables between the compure and the server)
Installed latest evaluation of Autocad LT 2013
No Antivirus; firewall settings by default
The user is the only one who access to the autocad files.
Still the problem.
The user does want work on the network anymore unless the problem is solved, which is annoying because only the server has a backup routine.
I am having problems with an error message relating to what appears to be a corrupted design data file. I am unable to save changes in my dwg to my design data file. I get this message:
Style library (C:UsersPublicDocumentsAutodeskInventor 2011Design Data) cannot be saved because it is damaged.If I attempt to copy a view in a dwg to another sheet or move it using the browser, I get the following error:
Paste View: problems encountered while executing this command.
Invalid XML value for 'SubstituteDisplayUnit'. Expected 'bool' received '44' in file:///C:/Users/Public/Documents/Autodesk/Inventor%202011/Design%20Data/PartsList.xml.
Invalid XML value for 'SubstituteFractionalFormat'. Expected 'bool' received '255' in file:///C:/Users/Public/Documents/Autodesk/Inventor%202011/Design%20Data/PartsList.xml.
I have also noticed that if I multi select components with ipropWiz5 and attempt to change the part name - it fails.I have tried reinstall in Inventor, ipropWiz5, etc. But to no avail.
When I change the User Preferences "right click customization" to "Repeat Last Command" and "ENTER" then hit "Apply & Close" it reverts back to the default settings.
View 9 Replies View RelatedWe are seeing some issues with some users regarding what looks like a timeout in licensing?Basically our users are opening drawings, making amendments and trying to save, however, when the user or users try to save the drawing. It will state that the drawing is being accessed by another session.
We have removed all instances of the DWL's to see if we can resave but the only option we can use is to save them as *.tmp files.I do know that we have replaced the server in the office that is now experiencing this problem, previously they weren't having any issues.
Any good place to start looking into this as it seems there are too many things to consider and we would like to pinpoint the issue sooner rather than later..I want to be able to quickly identify if AutoCAD is at fault or the server.
I am trying to do text to path and I finally got it to work, but it is not bringing the text color that I assigned. Instead the text becomes a black outline of the real text. I uploaded this to the application I wanted to use it in, and the text was gone.
View 1 Replies View RelatedI have downloaded the new photoshop cs6 app on my PC and my laptop. I cannot save or save as on the laptop? If I click (x) to close, it will asked if I want to save before closing, and I can save that way. what is wrong?
View 1 Replies View Related