I have a file where I can't save, because it says its being accessed by another session. The problem is no one has it open. I did a save as and tried changing the name of the original file or move the file with no luck. I need to keep the file name for purpose of company file structure.
View 9 RepliesWe are seeing some issues with some users regarding what looks like a timeout in licensing?Basically our users are opening drawings, making amendments and trying to save, however, when the user or users try to save the drawing. It will state that the drawing is being accessed by another session.
We have removed all instances of the DWL's to see if we can resave but the only option we can use is to save them as *.tmp files.I do know that we have replaced the server in the office that is now experiencing this problem, previously they weren't having any issues.
Any good place to start looking into this as it seems there are too many things to consider and we would like to pinpoint the issue sooner rather than later..I want to be able to quickly identify if AutoCAD is at fault or the server.
Randomly, a few times a week, I get an error in AutoCAD LT 2012 when trying to save a dwg file. It says
"Unable to save to drawing {filename} as it is being accessed by another session. Drawing saved to {filename}.tmp." The file then turns into Read Only and says
"Drawing file is write protected."
We have to do a Save As to a different filename in order to regain functionality.
I have the same problem reported here : [URL]
Fresh installation of Windows Small Business 2011 standard
Disabled offline and cache on shared directories
Removed the router (server and computers in "standalone", just joined by a gigabit switch 5 ports, 2m of cables between the compure and the server)
Installed latest evaluation of Autocad LT 2013
No Antivirus; firewall settings by default
The user is the only one who access to the autocad files.
Still the problem.
The user does want work on the network anymore unless the problem is solved, which is annoying because only the server has a backup routine.
I am using AutoCAD 2012 and I have an Issue that comes up once in a while. I will save the drawing that I am working in and a dialog box pops up with "AutoCAD Message. It says that it is unable to save to drawing, then lists the string where the drawing is found. Instead of saving as a .dwg, it creates a .tmp of the drawing. If I click the okay in the box it disappears and I can then resave the drawing as a .dwg. Lately it will even go so far as to lock the drawing and allow it to be only opened as a read only file.
View 1 Replies View RelatedExcept for the minor/temporary glitch back in 2009, we have had very good luck with Riverbed/Steelhead devices for accelerating DWG file access over a MPLS WAN connection.
When accessing Sheetset (DST) files on a remote server across the WAN, a DBL file appears alongside the DST and from that point on, the remote user has excluside R/W access to the DST file which prevents any other user from accessing the sheet set concurrently.
On the LAN that is local to the server, this problem never exists until the DST file is accessed in any of several remote locations.
I used to be able to open a drawing then close it right away, if it was not the drawing I was looking for, as long as I didn't pan, zoom, or do anything else. Almost a year ago I had a pop-up with-in AutoCAD that they reccommend I make this selection. I can't remember what it said really, it was something about a script or lisp loading at each drawing opening. Well, the result is the 'Drawing 1' does not disappear when I open another drawing and I would like that to stop. Also as I said it does it to every drawing. how to stop this? I tried the 'startup' command and that is not it. It is not a big thing just something I think is a waste of my time having to close that drawing each time I open AutoCAD. Not sure it matters but I am using AutoCAD 2012
View 7 Replies View RelatedWhen I attempt to "authorize" Lightroom to access my Facebook account I get a "webpage cannot be accessed" and the address [url].... and a ridiculously long string of jibberish afterward. Same thing happens with the built in publish service for Flickr.
View 7 Replies View RelatedEvery time I open a new drawing a new Inventor session starts up and the drawing is opened in there. It's ok if I go through file-open etc in a current Inventor session but I don't want to open drawings like that all the time. If I open 5 drawings at once they start up in 5 seperate Inventor sessions! I can't seem to find an option to change this, is it an inventor problem or windows?
View 3 Replies View RelatedAm using Autocad LT 2013 on Windows platform using Fusion Ware on a Mac Pro. This is a company owned computer and all files are saved to a server. This problem began occurring after we returned to work on Jan 2. I will be working in drawing and save regularly. Additionally autosave is set for 5 minute intervals.
Several times a day I get a message saying
"Unable to save drawing\serverfilename.dwg. Drawing saved to \serverfilenamesavF676.tmp."
When I check the folder where the drawing is supposed to be there is a "filename.dwl" and the "sav676.tmp." files but the original .dwg doesn't show up in the list.
If I save as the file to my desktop it is fine, but I then have to move it back to the server per company policy. This is extremely tedious to say the least. This happens several times a day so far.
The IT guy has twice reset the permissions for the Directory so the files are not Read Only (although when I check the main client folder and sub folders from my computer the Read Only option is checked and I cannot change this).
Another Autocad user in the office, LT 2013, says this has happened to him but only occasionally.
Also, several times I have noticed an alert pop-up that says something about "Unable to map network drive G:\" but clicking on the notice just expands the message. G Drive is the primary server in our office. The only PC computers in our office are used for Autocad, the rest are all Apple products and the IT tech is a Mac guy.
I recently started having trouble when I try to save a file. It started about an hour ago. I have been working on this file all day with no problems. What is happening is when I do a quick save or a save as I get an error that says "unable to save to drawing F:NNorthview SchoolsHS - Phase 5, 6 & 7NH-EPSF1A13.dwg. Drawing saved to F:NNorthview SchoolHS - Phases 5,6 & 7savACD.tmp"
If I do a save as It will say the same thing but it will delete the existing file that I tried to save over. I have to do another save as to get the file back. I think this is specific to this drawing because I have not had it happen with any other file.
I ran Recover on the two exref files as well as the working file. No errors are found. I have purged all the files and tried again but it did not work.
I am using Map 3D 2013 on a Windows 7 machine and am getting the following error when I try to do any save, q save or saveas: "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I was working in this file yesterday and received the same error at one point. I shut CAD down and did something for a few hours before I came back and everything operated normally for a little while. I was able to make edits and save. But then this morning the error is back. Even upon opening the file and immediately trying to qsave it will give me the error. I have run an audit, purged, tried to copy everything out and save to a new file. Nothing appears to be working.
We do run network licenses and I am pulling my drawings from a server, nothing is local to my machine.
I have a .dwg file and when I try to save as 2010 DXF format, I get the following message:
"Unable to save to drawing c:projectslayout.dxf.
Drawing saved to c:projectssavF29D.tmp"
If I try to "save as" in DWG format with a different name in the same directory then it works. Also, there is no "savF29D.tmp" anywhere. I need the drawing DXF format.
I have just installed AutoCAD 2006 on a new PC, and for a while everything seemed fine. However when I save a drawing it comes up with the following:
Unable to save to drawing (path and filename).
Drawing saved to (path)savAE01.tmp
It allows me to saveas without a problem.
If I come out of AutoCAD and try to open the file I attempted to save, it is visible in the file list, but a message pops up saying:
Cannot find the specified drawing file. Please verify that the file exists.
I can rename the .tmp file to a .dwg file and it opens, but then if I try to qsave it, the same thing happens.
Several times, with different files, I get a message when I try to save a drawing using ctrl-S (or when clsoing an un-saved dwg);
Unable to save to drawing B: (file location folder)file name.
Drawing saved to B: (same file location folder)savD214.tmp
The only option is to click OK
Now there are several .tmp files in my job folder. I haven't tried to open them or anything else.
The original file will be lost if I close the drawing. I've had this happen when I clsoe the drawing before saving it - I'll get a message asking if I want to save the draiwng before closing it, and then I'll get this message, click OK, and the file will be gone. I have to to the .bak file, make a copy of it and change the file extension name to .dwg to get the file back.
If I get this message when I'm just doing a ctrl-S save, I immediately do a "save-as", copy over the original file name, and everything seems to be fine.
When running VS 2010 express in debug mode, for either AutoCAD 2010 or 2012, 64 bit, AutoCAD gets slower and slower loading with each subsequent debug session until it becomes intolerable. A system restart is necessary. Is this normal? I see this on a fast machine with tons of ram. During the waits there are patches of white screen in the various AutoCAD interface components. The performance hit is exponential with each session. The first debug is normal, The second is slightly slower. The third is noticeably slower and so on.
View 3 Replies View RelatedDev env: AutoCAD 2012, VS 2010, ObjectARX.Net 2012
A simple windows form command dll to test within the VS2012 + AutoCAD 2012
Bug: when debugging with VS2012, the first command runs fine and I can debug it with breakpoints etc etc. However, after the first debugging session, if I try "File"->"Open" or "New", file dialog will popup and then my AutoCAD 2012 crashs.
It won't happen if I compiled the dll, and load directly from AutoCAD independantly running instance.
Running CAD Arcitecture 2010 and I am not able to use the "save-as" function to save as a dwg file. Using the the same down-load disk I have not had any problem with "save-as" on my laptop.
View 3 Replies View RelatedI am unable to see the dimensions that I measure using power dimensions as per the attachment on the drawings itself. If i want to see it, I have to select the green line, and right click and select the line and select standard as the dimension style. I did not have to previously do all of this.
View 1 Replies View Relatedwhenever I click to attach a drawing reference nothing happens. I don't get the browse to file window.
I've tried using the GUI from the View menu / Palettes panel/external palette, Also from the command prompt by typing external references and attach still no joy.
I have all SPs installed. I tried exporting another user's profile and importing it to my CAD. Do I have to reinstall the software from scratch?
How do I record a series of actions that I can then save it as a kind of script or macro that I can run then in another work session on an object? Is this possible?
View 2 Replies View Relatedwhen i clicked the x I hit don't save for one drawing i did not want to save but i did not want to close the next drawing yet the same message came up so fast i hit don't save again without realising and deleted 3hrs of work that i really do not want to do again so is there any way i can recover it?
View 4 Replies View Related(Running AutoCAD 2010 on Win 7, Core i7, 8 GB RAM. All AutoCAD 2010 service packs are up-to-date)
I have a drawing file that keeps giving me this message when I try to open it :
"Unable to open this drawing.It contains incorrect or or corrupted information.The RECOVER command may be able to restore undamaged material from this drawing."
When I recover the file I sometimes get a message that 1 error was fixed, sometimes no errors were detected. Either way, when I close it, and try re-opening (whether or not I SAVE it first), I get the same message. I have tried RECOVERALL, AUDIT, AECTOACAD (those AEC objects can be a problem) and tried changing the AutoCAD version it saves to (eg 2007). None of this works. I also discovered that if I WBLOCK the entire drawing it fixes it for ONE reopen, but becomes corrupted if I save it. This drawing is used as a 'template' (not a .dwt, just a "starting point") for other drawings, so the corruption is spreading.......
I am upgrading to a newr version of AutoCAD soon (hopefully that will fix it?), but this is really slowing down produciton in the meantime....
How do I save xrefs in a drawing in Autocad 2012?
I´ve been using eTransmit command in previous versions, now that I´ve switched to v2012 there´s no longer support to save all dwg xrefs as dwg references in the eTransmit popup window. My dwg xrefs are instead attached as blocks.
I have a drawing where i am not able to select multiple grips using shift/pick to make the grips "hot". I'm not able to make even one of the grips of a poly line "hot". However, while trying to solve the problem, i've opened another drawing where i AM able to make grips "hot". It doesn't appear to be a system setting issue.
View 6 Replies View RelatedThe user is running Autocad 2010, and she was able to perform this function last week. Nothing has changed, and a system reboot did not correct the issue.
View 2 Replies View RelatedI recently added 2 monitors to my set up to bring my total to 3. I am trying to figure out the best way to work on one drawing, with 2 differant veiws on each of the 2 main screens.
I would like my main screen to have the plan view and the second monitor to have an isometric veiw (or whatever I need at the time) of the same drawing. Is there a way to have the same drawing opened up in another window, in one session of Autocad 2013. One on the main screen and one on the secondary.
I have a data-linked table (from an Excel 2007 file, 32-bit) in an Autocad 2010 drawing (64-bit, Windows 7 OS).
If the table is displayed as a single column, with table breaks off, the file will save within seconds.
If I enable table breaks, it will take at least 3-5 minutes for the drawing file to save.
I am unable to find any solution. I've tried using different table styles, different linked files/drawings, saving locally vs. on the network, headers and titles repeating vs not. The slowness is a major productivity killer.
I found this error a bit strange, my colleague it trying to save a file and this error keeps on coming out (see attachments). When we try to save it, it only saves as a temp file. When we try to open up the temp file and try to save it, it still doesn't allow us to do. Also, when we cancel the save, the original file will be gone and he will lost all of his data. Below are the specs of the computer and version of the AutoCAD.
Computer: DELL Precision T5500
OS: Windows 7 Ult
AutoCAD Version: 2011
Also, we're using ProSteel Series 3 as well. We tried saving the file using ProSteel and just AutoCAD but it didn't do the trick. I've tried some options (listed below) that might get it to work but still no luck.
1. Restart the computer.
2. Repair / Reinstall AutoCAD.
3. Give permission to the folder (read from the forum).
I use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies View RelatedI am able to access(list & modify) custom sheet properties within a sheet set via .GetCustomPropertyBag. How are the OOTB sheet properties accessed?
View 6 Replies View Related