Randomly, a few times a week, I get an error in AutoCAD LT 2012 when trying to save a dwg file. It says
"Unable to save to drawing {filename} as it is being accessed by another session. Drawing saved to {filename}.tmp." The file then turns into Read Only and says
"Drawing file is write protected."
We have to do a Save As to a different filename in order to regain functionality.
I have a file where I can't save, because it says its being accessed by another session. The problem is no one has it open. I did a save as and tried changing the name of the original file or move the file with no luck. I need to keep the file name for purpose of company file structure.
View 9 Replies View RelatedI have the same problem reported here : [URL]
Fresh installation of Windows Small Business 2011 standard
Disabled offline and cache on shared directories
Removed the router (server and computers in "standalone", just joined by a gigabit switch 5 ports, 2m of cables between the compure and the server)
Installed latest evaluation of Autocad LT 2013
No Antivirus; firewall settings by default
The user is the only one who access to the autocad files.
Still the problem.
The user does want work on the network anymore unless the problem is solved, which is annoying because only the server has a backup routine.
We are seeing some issues with some users regarding what looks like a timeout in licensing?Basically our users are opening drawings, making amendments and trying to save, however, when the user or users try to save the drawing. It will state that the drawing is being accessed by another session.
We have removed all instances of the DWL's to see if we can resave but the only option we can use is to save them as *.tmp files.I do know that we have replaced the server in the office that is now experiencing this problem, previously they weren't having any issues.
Any good place to start looking into this as it seems there are too many things to consider and we would like to pinpoint the issue sooner rather than later..I want to be able to quickly identify if AutoCAD is at fault or the server.
When I attempt to "authorize" Lightroom to access my Facebook account I get a "webpage cannot be accessed" and the address [url].... and a ridiculously long string of jibberish afterward. Same thing happens with the built in publish service for Flickr.
View 7 Replies View RelatedEvery time I open a new drawing a new Inventor session starts up and the drawing is opened in there. It's ok if I go through file-open etc in a current Inventor session but I don't want to open drawings like that all the time. If I open 5 drawings at once they start up in 5 seperate Inventor sessions! I can't seem to find an option to change this, is it an inventor problem or windows?
View 3 Replies View RelatedAm using Autocad LT 2013 on Windows platform using Fusion Ware on a Mac Pro. This is a company owned computer and all files are saved to a server. This problem began occurring after we returned to work on Jan 2. I will be working in drawing and save regularly. Additionally autosave is set for 5 minute intervals.
Several times a day I get a message saying
"Unable to save drawing\serverfilename.dwg. Drawing saved to \serverfilenamesavF676.tmp."
When I check the folder where the drawing is supposed to be there is a "filename.dwl" and the "sav676.tmp." files but the original .dwg doesn't show up in the list.
If I save as the file to my desktop it is fine, but I then have to move it back to the server per company policy. This is extremely tedious to say the least. This happens several times a day so far.
The IT guy has twice reset the permissions for the Directory so the files are not Read Only (although when I check the main client folder and sub folders from my computer the Read Only option is checked and I cannot change this).
Another Autocad user in the office, LT 2013, says this has happened to him but only occasionally.
Also, several times I have noticed an alert pop-up that says something about "Unable to map network drive G:\" but clicking on the notice just expands the message. G Drive is the primary server in our office. The only PC computers in our office are used for Autocad, the rest are all Apple products and the IT tech is a Mac guy.
I recently started having trouble when I try to save a file. It started about an hour ago. I have been working on this file all day with no problems. What is happening is when I do a quick save or a save as I get an error that says "unable to save to drawing F:NNorthview SchoolsHS - Phase 5, 6 & 7NH-EPSF1A13.dwg. Drawing saved to F:NNorthview SchoolHS - Phases 5,6 & 7savACD.tmp"
If I do a save as It will say the same thing but it will delete the existing file that I tried to save over. I have to do another save as to get the file back. I think this is specific to this drawing because I have not had it happen with any other file.
I ran Recover on the two exref files as well as the working file. No errors are found. I have purged all the files and tried again but it did not work.
I am using Map 3D 2013 on a Windows 7 machine and am getting the following error when I try to do any save, q save or saveas: "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I was working in this file yesterday and received the same error at one point. I shut CAD down and did something for a few hours before I came back and everything operated normally for a little while. I was able to make edits and save. But then this morning the error is back. Even upon opening the file and immediately trying to qsave it will give me the error. I have run an audit, purged, tried to copy everything out and save to a new file. Nothing appears to be working.
We do run network licenses and I am pulling my drawings from a server, nothing is local to my machine.
I have just installed AutoCAD 2006 on a new PC, and for a while everything seemed fine. However when I save a drawing it comes up with the following:
Unable to save to drawing (path and filename).
Drawing saved to (path)savAE01.tmp
It allows me to saveas without a problem.
If I come out of AutoCAD and try to open the file I attempted to save, it is visible in the file list, but a message pops up saying:
Cannot find the specified drawing file. Please verify that the file exists.
I can rename the .tmp file to a .dwg file and it opens, but then if I try to qsave it, the same thing happens.
Several times, with different files, I get a message when I try to save a drawing using ctrl-S (or when clsoing an un-saved dwg);
Unable to save to drawing B: (file location folder)file name.
Drawing saved to B: (same file location folder)savD214.tmp
The only option is to click OK
Now there are several .tmp files in my job folder. I haven't tried to open them or anything else.
The original file will be lost if I close the drawing. I've had this happen when I clsoe the drawing before saving it - I'll get a message asking if I want to save the draiwng before closing it, and then I'll get this message, click OK, and the file will be gone. I have to to the .bak file, make a copy of it and change the file extension name to .dwg to get the file back.
If I get this message when I'm just doing a ctrl-S save, I immediately do a "save-as", copy over the original file name, and everything seems to be fine.
I am using AutoCAD 2012 and I have an Issue that comes up once in a while. I will save the drawing that I am working in and a dialog box pops up with "AutoCAD Message. It says that it is unable to save to drawing, then lists the string where the drawing is found. Instead of saving as a .dwg, it creates a .tmp of the drawing. If I click the okay in the box it disappears and I can then resave the drawing as a .dwg. Lately it will even go so far as to lock the drawing and allow it to be only opened as a read only file.
View 1 Replies View RelatedHow do I record a series of actions that I can then save it as a kind of script or macro that I can run then in another work session on an object? Is this possible?
View 2 Replies View RelatedI recently added 2 monitors to my set up to bring my total to 3. I am trying to figure out the best way to work on one drawing, with 2 differant veiws on each of the 2 main screens.
I would like my main screen to have the plan view and the second monitor to have an isometric veiw (or whatever I need at the time) of the same drawing. Is there a way to have the same drawing opened up in another window, in one session of Autocad 2013. One on the main screen and one on the secondary.
I use autocad architecture 2013 and it works just fine until the save turns to qsave whenever i want to save a drawing by save, save as and ctrl+s it works as qsave..how can I turn it back to SAVE ?
View 9 Replies View RelatedI used to be able to open a drawing then close it right away, if it was not the drawing I was looking for, as long as I didn't pan, zoom, or do anything else. Almost a year ago I had a pop-up with-in AutoCAD that they reccommend I make this selection. I can't remember what it said really, it was something about a script or lisp loading at each drawing opening. Well, the result is the 'Drawing 1' does not disappear when I open another drawing and I would like that to stop. Also as I said it does it to every drawing. how to stop this? I tried the 'startup' command and that is not it. It is not a big thing just something I think is a waste of my time having to close that drawing each time I open AutoCAD. Not sure it matters but I am using AutoCAD 2012
View 7 Replies View RelatedI am able to access(list & modify) custom sheet properties within a sheet set via .GetCustomPropertyBag. How are the OOTB sheet properties accessed?
View 6 Replies View RelatedFrom the start, I wasn't able to save to jpeg without getting a dcm extension (no jpg extension). However, if I saved to Multi-picture Format, I would get the familiar .jpg and everything worked fine for a while. This morning I cannot find a file format in "save as" that results in the .jpg file extension.
View 2 Replies View RelatedExcept for the minor/temporary glitch back in 2009, we have had very good luck with Riverbed/Steelhead devices for accelerating DWG file access over a MPLS WAN connection.
When accessing Sheetset (DST) files on a remote server across the WAN, a DBL file appears alongside the DST and from that point on, the remote user has excluside R/W access to the DST file which prevents any other user from accessing the sheet set concurrently.
On the LAN that is local to the server, this problem never exists until the DST file is accessed in any of several remote locations.
I just returned from holidays and fired up my computer only to find that for some reason, photoshop cs 5.1 could not be accessed. The error message read "Owl orphanage Photoshop exe. Msvcp 110:dll System error. I used the program the night before leaving and am at a loss as to what happened.
View 4 Replies View RelatedUsing Inventor 2013. As you know it's impossible to chang iproperties values of the library parts in inventor session (for instance in asm file). The error message comes "readonly".
But when you open iproperties of the file in windows file explorer then it's possible to change iproperties values while library parts open in inventor session in asm.
Normally I copy the file location path of the library part and open this path in the windows file explorer and find the part and right-click on file and change iproperties values which I want to change stock number, part description etc...
Is it possible to create VBA code or API which can open iproperties box of the selectet part outside of the inventor session in windows file explorer?
Is it possible to split your inventor session in 2 screens?
Without having to use 2 sessions ofc.
I am working on an application that uses map to query data, then saves the data to a file, and repeat. It works flawlessly when I use a commandmethod with commandflags.session, But, when I try to run the same code from a form button, I get "drawing is busy". The command from the form button ignores the commandmethod and the commandflags. I am guessing that "sendstringtoexecute" would work, but I would prefer to not do it that way.
What am I missing? Is there another way to lock the session?
Here is what I am trying to do.
drawing1 is open and the user presses the button
data is queried and saved as 1.dwg
close and discard drawing1
open a new doc drawing2
data is queried and saved as 2.dwg
close and discard drawing2
open a new doc drawing3
I am running AutoCAD 2006 LT and AutoCAD 2010 on one computer and have the SDI set correctly. When I open multiple files from Windows Explorer, it opens multiple AutoCAD sessions. How to avoid this from happening?
View 4 Replies View RelatedWhen running VS 2010 express in debug mode, for either AutoCAD 2010 or 2012, 64 bit, AutoCAD gets slower and slower loading with each subsequent debug session until it becomes intolerable. A system restart is necessary. Is this normal? I see this on a fast machine with tons of ram. During the waits there are patches of white screen in the various AutoCAD interface components. The performance hit is exponential with each session. The first debug is normal, The second is slightly slower. The third is noticeably slower and so on.
View 3 Replies View RelatedIn an assembly file, how can I reduce number of open docs in session.
Inventor Professional 2013
Vault Collaboration 2013
How to set the drawing file path so it shows up at the top of my screen when I am in an autocad session? Currently all I see is "Autocad Civil 3D".......
View 5 Replies View RelatedI have a .dwg file and when I try to save as 2010 DXF format, I get the following message:
"Unable to save to drawing c:projectslayout.dxf.
Drawing saved to c:projectssavF29D.tmp"
If I try to "save as" in DWG format with a different name in the same directory then it works. Also, there is no "savF29D.tmp" anywhere. I need the drawing DXF format.
I am currently using Acad 07 on Windows 7. I save my drawings to another pc on our network. Yesterday said pc was updated to windows 7 and now I am unable to save. I get an error message reading:- Unable to save drawing Location/file name.dwg, drawing saved to drawing/filename.tmp. What is a .tmp? I can save the files on my computer then move them over but it isn't ideal
View 3 Replies View RelatedAble to draw my lines but then unable to save dtext or mtext to them, only option is ESC or force quit. Using Autocad 2012 student license. got the 30 day trial for 2013, text not saving there either. Not using a layer. Deleting preferences did not work.
View 5 Replies View Relatedboth machines running windows 7 professional or better (so the full version of RDP is available), and CS6 runiing on the desktop, accessed from my laptop.
As the GPU is being used as a compute resource, will CS use the desktop GPU for acceleration?