AutoCad :: Position Of Tool Bars Changes
Jul 25, 2013
I'm having trouble setting up my toolbars. I position them the way I want, but as soon as I switch back from a different workspace (lets say3D modeling) the position of the toolbars change. Also I can't get the scroll bars to disappear for good, they always come back
Here is what I do exactly:
1. Change the content and the position of the toolbars (acad classic workspace)
2. Lock down the toolbars
3. Go to options => profiles, create a new profile (add to list), set current
4. Change workspace to 3D modeling
5. Change workspace back to acad classic
img3.jpgimg4.jpg
The result is: content of the toolbars is the way I want, but the position is changed. The toolbars are locked, so in order to move them to the desired place I have to unlock.
View 7 Replies
ADVERTISEMENT
Jan 30, 2012
The color, linetype and line width sections of the toolbar no longer show on the working screen but they do show on the toolbar manager. How do I recover them?
View 2 Replies
View Related
Oct 6, 2011
I'm setting up some custom toolbars and that's no problem, but what I'd like to do is have one of the buttons be a toggle, so the icon changes depending on what state it is in. I'm just having a bit of trouble figuring out how I find those buttons programatically from within C#. I've included Autodesk.Autocad.Customization which gives me the Toolbar, Tool bar button, etc classes, but I don't know how to find the existing toolbars from the running session of AutoCAD.
View 9 Replies
View Related
Mar 28, 2012
I am in the process of setting up a new computer and I just installed AutoCAD Mechanical 2012 which I have on the older computer that I am replacing.
Is it possible to copy specific files from my old computer to the new one so that I don't have to go through the process of setting up the desktop and tool bars all over again?
View 3 Replies
View Related
Jul 8, 2013
On two occasions now since last software update, when I open Autocad LT 2013, my tool bars are all gone. I use a customized layout/workspace based off the original/classic layout option. When I change layout to drafting/annotation, toolbars for that layout appear, but when I switch back to my saved layout, all tool bars are still gone and I have to go through whole process of adding the ones I want again.
View 2 Replies
View Related
Jul 28, 2013
My ribbon disappear along with my tool bars and all.
View 3 Replies
View Related
Mar 16, 2012
How to change the color of tool bars. The interface of ACA 2012 is too negative, I mean it's too much grey or light grey.
I would like to have 2008 or early version interface.
View 5 Replies
View Related
Apr 22, 2013
I went to use my laptop with autocad LT 2012 which I do not use that much. When I lookd all the Icons on the tool bars are missing. The tabs still work but it is hard to figure out what they do. I have not changed any settings.
View 6 Replies
View Related
Jan 27, 2013
I have created a custom tool bar for ACAD 2013. Each time I start a new ACAD session, my tool bar is not docked at the top of the screen and the other standard tool bars I do not want appear.
How do I permanently keep the unwanted tool bars from appearing? Also, in the upper left corner of the screen the following appears: [-][Top][2D Wireframe]. How do I get rid of if?
View 4 Replies
View Related
Dec 1, 2011
Just installed AutoCAD 2012, started to set up my tools and found many of the ACAD toolbars displaying the wrong, or no icon for the commands. Example: Modify TB
displays "move" for erase
"mirror" for rotate
"fillet" for explode
This is true with the Draw TB, Dimension TB, UCS TB...and more..I have not even customized any toolbars yet...just turned on/off the AutoCAD ones.
View 8 Replies
View Related
Nov 22, 2011
if you can customize / move tool bars & zoom in/out using mouse wheel with AutoCAD 2012 LT ?
View 5 Replies
View Related
Nov 1, 2013
why my tool bars keep disappearing in GIMP 2.8.2? I know how to bring them back (go into settings, set them back to defaults and restart) .
View 2 Replies
View Related
Dec 11, 2012
When I first downloaded gimp it worked great. Now the side tool bars are gone and I don't know how to restore them. I've attached a picture of what it looks like when I open gimp so you can see it's only the main center window that opens.
View 3 Replies
View Related
Apr 19, 2012
Is there any way to lock the tool bars into the GUI instead of having them get in the way all the time?
View 5 Replies
View Related
Feb 6, 2014
Is there an option somewhere within AI that allows you to enlarge the menu bar and the tool box...pretty much all the text/icons within the interface?
View 2 Replies
View Related
Dec 19, 2012
I am upgrading from max 2012 to 2013. I wont to have my customized workplace (my tool bars) exported to max 2013.
View 2 Replies
View Related
Jan 16, 2013
I have a bunch of students who load tool bars and dock their command line, but as soon as they close AutoCAD and reopen, the command line is floating again and the tool bars are missing. Saving and importing a profile does not seem to work!
View 1 Replies
View Related
Jul 12, 2013
Is it possible to setup a block so that an attribute position remaines fixed (absolute to drawing) when moving the block?
I've been playing around with creating a Coordinate Block by following these instructions: [URL] ........
What I would like is to be able to set the position of the Coordinate Label and Coordinate Object independently, so that if I move one in the drawing, it doesn't move the other. I've looked into Dynamic Blocks, and the "Lock Position" parameter. I can move the attribute independently, but still everytime I move the block, the attribute moves too.
Our company uses a custom Sheet/Coordinate system to follow flyoffs across a drawing, and I'm trying to learn how to automate the process. It's completely manually right now, so any changes to a drawing creates a lot of work renumbering these flyoffs.
View 4 Replies
View Related
Apr 6, 2013
On my tool barin transformation bar i had position - absolute (coordinates) and size of a selected object.
i changed something and now i have position like 0.00 x 0.00 (i think its relative position) and when i write something in position it moves relative to previous.
when i press alt+f7 i can change position relative and absolute but toolbar don't change. How to set toolbar to show me always absolute position?
View 7 Replies
View Related
Jul 30, 2013
I'm using the trial version of Elements 11 to see if I should downgrade from an old version of Photoshop. I'm running into two problems:
1) when I re-size an image, it doesn't show pixels in the drop-down box under Document Size, and
2) if I manually re-size an image, I can't get the move tool to nudge it into position.
View 2 Replies
View Related
May 17, 2012
Recently upgraded to Gimp 2.8 for the single window mode (which worksbrilliantly in Ubuntu, especially with the HUD).
But the Rectangle Select Tool has a new - but odd - behaviour. When I drawa selection, and then add to that selection, a new "square" is position atmy cursor. (See attached screenshot.) This didn't happen in 2.6 and is abit irritating because it disorientates me slightly, especially if I'mworking quickly.
Is there a way to turn that off (or revert it to the 2.6 way)?
View 3 Replies
View Related
Jan 20, 2014
Can the add, delete, convert indicators be moved from the right side of the pen curser to the left of the curser for right handed users? The indicators are obscured by the pen when using the pen in the right hand on the Wacom Cintiq. Option preference for right or left hand is desired.
View 5 Replies
View Related
Feb 11, 2014
I'm using AI CC now, but I noticed this problem in earlier versions of AI: If I want to place a one-word label on an illustration I move the type insertion cursor to a speific point on the screen image and click, but then the flashing insertion point, where the label will actually start, pops up elsewhere, usually a line or two above where the cursor was, and a pica or two to the left, forcing me to type the label, then move it into position rather than simply typing it in the right place and moving on. The problem is merely annoying, but I'd like to fix it. It's probably a matter of ignorance-I simply haven't read the right documentation, but I don't know what to call the problem. Where can I find out how to change the position of the cursor relative to the insertion point?
View 2 Replies
View Related
May 15, 2013
Is there an easy way to ensure that the position of attributes on a block match the position on another block?
I just used the ATTIN command to upload a bunch of data to the block attributes on a drawing, and now the information is all over the place.
Instead of going through each one manually and repositioning the attributes (a VERY lengthy process), I want to use a "correct" version as a template of sorts to inform the other selected blocks of where to place the attributes and have it reposition the whole thing automatically.
Is this even possible?
View 6 Replies
View Related
Apr 25, 2013
I draw a lot of custom metal products at my work, many times they require an isometric view to fully understand what needs to be fabricated. I need to show what is welded on top of what, which usually involves me drawing out a whole line, and then large amounts of trimming to show what gets layered underneath. It is annoying but not so bad until the design gets changed, and then I basically have to start over again because any changes at all cause all the lines to not match up. Is there an easier way to do this?
I have tried drawing these in 3-d, but my computer freezes up on me too much. I was thinking if there was a way to draw something so that it is solid, I can then use draw order to show which bar is to be welded where. The only way I know how to do that now, uses solid hatching, and then prints the solid area solid black, and you can't see my anything but a black grid, not showing layers at all. I'm attaching an example of what I sometimes draw,
TRASH RACK.dwg
View 9 Replies
View Related
Oct 7, 2013
I've attached a PDF to my drawing and when I zoom in a bit it shows horizontal bars all over the PDF. The bars show up when printing as well. This is the first time it has ever happened to me.
My PDF Underlay contrast is set to 100, fade to 0, monochrome No, and Adjust colors for background Yes.
View 1 Replies
View Related
Oct 24, 2012
layer manager.pdfI have a good one lol
When I open my Layer manager in AutoCAD 2012 - I have hatch symbols across the top where 'New Layer', New Property Filter', 'Set Current' etc. should be.
while this is very entertaining and different - I am worried what will happen next. I have only had my new pc for about 6 weeks and the Version 2013 is a new download.
I have a pdf of a screenshot attached.
View 0 Replies
View Related
Jun 21, 2012
I'm trying to learn autocad and I just downloaded the 2012 version. I can't figure out how to make the modelspace look the format in all the tutorial videos. I don't have a big menu bar on the top or bottom. It's so hard for me to follow videos when nothing looks the same and I can't find the buttons/commands.
How to change the format/menu bars?
View 4 Replies
View Related
Sep 17, 2013
I'm having an issue with the action bar locations. While I am creating the dynamic block, the actions all attach them selves to their respective parameters. The problem is that somehow at some time, the action bars change their mind and all lock down to the origin. All my action bars and icons are on top of each other. Is there a parameter to adjust to make the action bars move back to their parameters? Images are attached.
View 5 Replies
View Related
Jan 31, 2012
When I switch tabs in my UI (I use Drafting and Annotation), they bug somehow and they don't upgrade visually. What I mean is that if I switch "Home" tab to "Annotate", it keeps showing "Home" tab maximized, but the if I click "Line" it would use "Multiline tool", as they occupy same space in corresponding tab. I can fix it temporarily by multi-clicking bar, but after next switch between tabs, it would bug again. I assume it is not hardware problem, as it used to work for me, then I reinstalled my OS and bug started.
View 7 Replies
View Related
Aug 9, 2013
All the text on my palettes and bars are not appearing. I can see only the numbers that were on them.
The same happen with list of layers, colors and every dropdown list. See screenshot attached for a better understanding.
I tried reinstalling and resetting configs, but it didn't work.
View 2 Replies
View Related
